| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2007 AMD |
| * Written by Yinghai Lu <yinghailu@amd.com> for AMD. |
| * Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS) |
| * Written by Morgan Tsai <my_tsai@sis.com> for SiS. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #define ASSEMBLY 1 |
| #define __PRE_RAM__ |
| |
| #define RAMINIT_SYSINFO 1 |
| |
| #define K8_ALLOCATE_IO_RANGE 1 |
| |
| #define QRANK_DIMM_SUPPORT 1 |
| |
| #if CONFIG_LOGICAL_CPUS==1 |
| #define SET_NB_CFG_54 1 |
| #endif |
| |
| //used by init_cpus and fidvid |
| #define K8_SET_FIDVID 1 |
| //if we want to wait for core1 done before DQS training, set it to 0 |
| #define K8_SET_FIDVID_CORE0_ONLY 1 |
| |
| #if CONFIG_K8_REV_F_SUPPORT == 1 |
| #define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 |
| #endif |
| |
| #define DBGP_DEFAULT 7 |
| |
| #include <stdint.h> |
| #include <string.h> |
| #include <device/pci_def.h> |
| #include <device/pci_ids.h> |
| #include <arch/io.h> |
| #include <device/pnp_def.h> |
| #include <arch/romcc_io.h> |
| #include <cpu/x86/lapic.h> |
| #include "option_table.h" |
| #include "pc80/mc146818rtc_early.c" |
| |
| #include "pc80/serial.c" |
| #include "arch/i386/lib/console.c" |
| #if CONFIG_USBDEBUG_DIRECT |
| #include "southbridge/sis/sis966/sis966_enable_usbdebug_direct.c" |
| #include "pc80/usbdebug_direct_serial.c" |
| #endif |
| #include "lib/ramtest.c" |
| |
| #include <cpu/amd/model_fxx_rev.h> |
| |
| #include "southbridge/sis/sis966/sis966_early_smbus.c" |
| #include "southbridge/sis/sis966/sis966_enable_rom.c" |
| #include "northbridge/amd/amdk8/raminit.h" |
| #include "cpu/amd/model_fxx/apic_timer.c" |
| #include "lib/delay.c" |
| |
| #include "cpu/x86/lapic/boot_cpu.c" |
| #include "northbridge/amd/amdk8/reset_test.c" |
| #include "superio/ite/it8716f/it8716f_early_serial.c" |
| #include "superio/ite/it8716f/it8716f_early_init.c" |
| |
| #include "cpu/x86/bist.h" |
| |
| #include "northbridge/amd/amdk8/debug.c" |
| |
| #include "cpu/amd/mtrr/amd_earlymtrr.c" |
| |
| #include "northbridge/amd/amdk8/setup_resource_map.c" |
| |
| #define SERIAL_DEV PNP_DEV(0x2e, IT8716F_SP1) |
| |
| #include "southbridge/sis/sis966/sis966_early_ctrl.c" |
| |
| static void memreset_setup(void) |
| { |
| } |
| |
| static void memreset(int controllers, const struct mem_controller *ctrl) |
| { |
| } |
| |
| static inline void activate_spd_rom(const struct mem_controller *ctrl) |
| { |
| /* nothing to do */ |
| } |
| |
| static inline int spd_read_byte(unsigned device, unsigned address) |
| { |
| return smbus_read_byte(device, address); |
| } |
| |
| #include "northbridge/amd/amdk8/amdk8_f.h" |
| #include "northbridge/amd/amdk8/coherent_ht.c" |
| |
| #include "northbridge/amd/amdk8/incoherent_ht.c" |
| |
| #include "northbridge/amd/amdk8/raminit_f.c" |
| |
| #include "lib/generic_sdram.c" |
| |
| #include "resourcemap.c" |
| |
| #include "cpu/amd/dualcore/dualcore.c" |
| |
| #define SIS966_NUM 1 |
| #define SIS966_USE_NIC 1 |
| #define SIS966_USE_AZA 1 |
| |
| #define SIS966_PCI_E_X_0 0 |
| |
| #define SIS966_MB_SETUP \ |
| RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \ |
| RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \ |
| RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \ |
| RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \ |
| RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \ |
| RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */ |
| |
| #include "southbridge/sis/sis966/sis966_early_setup_ss.h" |
| #include "southbridge/sis/sis966/sis966_early_setup_car.c" |
| |
| #include "cpu/amd/car/copy_and_run.c" |
| |
| #include "cpu/amd/car/post_cache_as_ram.c" |
| |
| #include "cpu/amd/model_fxx/init_cpus.c" |
| |
| #include "cpu/amd/model_fxx/fidvid.c" |
| |
| #include "northbridge/amd/amdk8/early_ht.c" |
| |
| |
| static void sio_setup(void) |
| { |
| |
| unsigned value; |
| uint32_t dword; |
| uint8_t byte; |
| |
| byte = pci_read_config8(PCI_DEV(0, SIS966_DEVN_BASE+1 , 0), 0x7b); |
| byte |= 0x20; |
| pci_write_config8(PCI_DEV(0, SIS966_DEVN_BASE+1 , 0), 0x7b, byte); |
| |
| dword = pci_read_config32(PCI_DEV(0, SIS966_DEVN_BASE+1 , 0), 0xa0); |
| dword |= (1<<0); |
| pci_write_config32(PCI_DEV(0, SIS966_DEVN_BASE+1 , 0), 0xa0, dword); |
| |
| dword = pci_read_config32(PCI_DEV(0, SIS966_DEVN_BASE+1 , 0), 0xa4); |
| dword |= (1<<16); |
| pci_write_config32(PCI_DEV(0, SIS966_DEVN_BASE+1 , 0), 0xa4, dword); |
| } |
| |
| void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) |
| { |
| static const uint16_t spd_addr [] = { |
| (0xa<<3)|0, (0xa<<3)|2, 0, 0, |
| (0xa<<3)|1, (0xa<<3)|3, 0, 0, |
| #if CONFIG_MAX_PHYSICAL_CPUS > 1 |
| (0xa<<3)|4, (0xa<<3)|6, 0, 0, |
| (0xa<<3)|5, (0xa<<3)|7, 0, 0, |
| #endif |
| }; |
| |
| struct sys_info *sysinfo = (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); |
| |
| int needs_reset = 0; |
| unsigned bsp_apicid = 0; |
| |
| if (!cpu_init_detectedx && boot_cpu()) { |
| /* Nothing special needs to be done to find bus 0 */ |
| /* Allow the HT devices to be found */ |
| |
| enumerate_ht_chain(); |
| |
| sio_setup(); |
| |
| /* Setup the sis966 */ |
| sis966_enable_rom(); |
| } |
| |
| if (bist == 0) { |
| bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); |
| } |
| |
| pnp_enter_ext_func_mode(SERIAL_DEV); |
| pnp_write_config(SERIAL_DEV, 0x23, 0); |
| it8716f_enable_dev(SERIAL_DEV, CONFIG_TTYS0_BASE); |
| pnp_exit_ext_func_mode(SERIAL_DEV); |
| |
| setup_mb_resource_map(); |
| |
| uart_init(); |
| |
| /* Halt if there was a built in self test failure */ |
| report_bist_failure(bist); |
| |
| |
| #if CONFIG_USBDEBUG_DIRECT |
| sis966_enable_usbdebug_direct(DBGP_DEFAULT); |
| early_usbdebug_direct_init(); |
| #endif |
| console_init(); |
| print_debug("*sysinfo range: ["); print_debug_hex32(sysinfo); print_debug(","); print_debug_hex32((unsigned long)sysinfo+sizeof(struct sys_info)); print_debug(")\r\n"); |
| |
| print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\r\n"); |
| |
| #if CONFIG_MEM_TRAIN_SEQ == 1 |
| set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram |
| #endif |
| setup_coherent_ht_domain(); // routing table and start other core0 |
| |
| wait_all_core0_started(); |
| #if CONFIG_LOGICAL_CPUS==1 |
| // It is said that we should start core1 after all core0 launched |
| /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, |
| * So here need to make sure last core0 is started, esp for two way system, |
| * (there may be apic id conflicts in that case) |
| */ |
| start_other_cores(); |
| wait_all_other_cores_started(bsp_apicid); |
| #endif |
| |
| /* it will set up chains and store link pair for optimization later */ |
| ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn |
| |
| #if K8_SET_FIDVID == 1 |
| |
| { |
| msr_t msr; |
| msr=rdmsr(0xc0010042); |
| print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n"); |
| |
| } |
| |
| enable_fid_change(); |
| |
| enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); |
| |
| init_fidvid_bsp(bsp_apicid); |
| |
| // show final fid and vid |
| { |
| msr_t msr; |
| msr=rdmsr(0xc0010042); |
| print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\r\n"); |
| |
| } |
| #endif |
| |
| needs_reset |= optimize_link_coherent_ht(); |
| needs_reset |= optimize_link_incoherent_ht(sysinfo); |
| |
| // fidvid change will issue one LDTSTOP and the HT change will be effective too |
| if (needs_reset) { |
| print_info("ht reset -\r\n"); |
| soft_reset(); |
| } |
| allow_all_aps_stop(bsp_apicid); |
| |
| //It's the time to set ctrl in sysinfo now; |
| fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); |
| |
| sis_init_stage1(); |
| enable_smbus(); |
| |
| memreset_setup(); |
| |
| //do we need apci timer, tsc...., only debug need it for better output |
| /* all ap stopped? */ |
| // init_timer(); // Need to use TMICT to synconize FID/VID |
| |
| sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); |
| |
| sis_init_stage2(); |
| post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now |
| |
| } |
| |