| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2012 Advanced Micro Devices, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <stdint.h> |
| #include <string.h> |
| #include <device/pci_def.h> |
| #include <device/pci_ids.h> |
| #include <arch/acpi.h> |
| #include <arch/io.h> |
| #include <arch/stages.h> |
| #include <device/pnp_def.h> |
| #include <arch/cpu.h> |
| #include <cpu/x86/lapic.h> |
| #include <console/console.h> |
| #include <console/loglevel.h> |
| #include <cpu/amd/car.h> |
| #include "agesawrapper.h" |
| #include <northbridge/amd/agesa/agesawrapper_call.h> |
| #include "cpu/x86/bist.h" |
| #include "cpu/x86/lapic.h" |
| #include "southbridge/amd/agesa/hudson/hudson.h" |
| #include "cpu/amd/agesa/s3_resume.h" |
| #include "cbmem.h" |
| |
| |
| void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) |
| { |
| u32 val; |
| |
| /* In Hudson RRG, PMIOxD2[5:4] is "Drive strength control for |
| * LpcClk[1:0]". To be consistent with Parmer, setting to 4mA |
| * even though the register is not documented in the Kabini BKDG. |
| * Otherwise the serial output is bad code. |
| */ |
| outb(0xD2, 0xcd6); |
| outb(0x00, 0xcd7); |
| |
| AGESAWRAPPER_PRE_CONSOLE(amdinitmmio); |
| |
| hudson_lpc_port80(); |
| |
| if (!cpu_init_detectedx && boot_cpu()) { |
| post_code(0x30); |
| |
| post_code(0x31); |
| console_init(); |
| } |
| |
| /* Halt if there was a built in self test failure */ |
| post_code(0x34); |
| report_bist_failure(bist); |
| |
| /* Load MPB */ |
| val = cpuid_eax(1); |
| printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); |
| printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); |
| |
| /* On Larne, after LpcClkDrvSth is set, it needs some time to be stable, because of the buffer ICS551M */ |
| int i; |
| for(i = 0; i < 200000; i++) |
| val = inb(0xcd6); |
| |
| post_code(0x37); |
| AGESAWRAPPER(amdinitreset); |
| post_code(0x38); |
| printk(BIOS_DEBUG, "Got past yangtze_early_setup\n"); |
| |
| post_code(0x39); |
| |
| AGESAWRAPPER(amdinitearly); |
| int s3resume = acpi_is_wakeup_early() && acpi_s3_resume_allowed(); |
| if (!s3resume) { |
| post_code(0x40); |
| AGESAWRAPPER(amdinitpost); |
| post_code(0x41); |
| AGESAWRAPPER(amdinitenv); |
| /* TODO: Disable cache is not ok. */ |
| disable_cache_as_ram(); |
| } else { /* S3 detect */ |
| printk(BIOS_INFO, "S3 detected\n"); |
| |
| post_code(0x60); |
| AGESAWRAPPER(amdinitresume); |
| |
| AGESAWRAPPER(amds3laterestore); |
| |
| post_code(0x61); |
| prepare_for_resume(); |
| } |
| |
| outb(0xEA, 0xCD6); |
| outb(0x1, 0xcd7); |
| |
| post_code(0x50); |
| copy_and_run(); |
| |
| post_code(0x54); /* Should never see this post code. */ |
| } |