| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <string.h> |
| #include <console/console.h> |
| #include <device/device.h> |
| #include <device/mmio.h> |
| #include <acpi/acpi.h> |
| #include <amdblocks/agesawrapper.h> |
| #include <amdblocks/amd_pci_util.h> |
| #include <amdblocks/i2c.h> |
| #include <baseboard/variants.h> |
| #include <boardid.h> |
| #include <smbios.h> |
| #include <soc/gpio.h> |
| #include <soc/pci_devs.h> |
| #include <soc/southbridge.h> |
| #include <amdblocks/acpimmio.h> |
| #include <variant/ec.h> |
| #include <variant/thermal.h> |
| |
| /*********************************************************** |
| * These arrays set up the FCH PCI_INTR registers 0xC00/0xC01. |
| * This table is responsible for physically routing the PIC and |
| * IOAPIC IRQs to the different PCI devices on the system. It |
| * is read and written via registers 0xC00/0xC01 as an |
| * Index/Data pair. These values are chipset and mainboard |
| * dependent and should be updated accordingly. |
| * |
| * These values are used by the PCI configuration space, |
| * MP Tables. TODO: Make ACPI use these values too. |
| */ |
| |
| static const u8 mainboard_picr_data[FCH_IRQ_ROUTING_ENTRIES] = { |
| [0x00] = 0x03, 0x04, 0x05, 0x07, 0x0B, 0x1F, 0x1F, 0x1F, |
| [0x08] = 0xFA, 0xF1, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x1F, |
| [0x10] = 0x09, 0x1F, 0x1F, 0x03, 0x1F, 0x1F, 0x1F, 0x03, |
| [0x18] = 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| [0x20] = 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x00, 0x00, |
| [0x28] = 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| [0x30] = 0x05, 0x04, 0x05, 0x04, 0x04, 0x05, 0x04, 0x05, |
| [0x38] = 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| [0x40] = 0x04, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| [0x48] = 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| [0x50] = 0x03, 0x04, 0x05, 0x07, 0x1F, 0x1F, 0x1F, 0x1F, |
| [0x58] = 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, |
| [0x60] = 0x1F, 0x1F, 0x07, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, |
| [0x68] = 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, |
| [0x70] = 0x03, 0x0F, 0x06, 0x0E, 0x0A, 0x0B, 0x1F, 0x1F, |
| [0x78] = 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, |
| }; |
| |
| static const u8 mainboard_intr_data[FCH_IRQ_ROUTING_ENTRIES] = { |
| [0x00] = 0x10, 0x11, 0x12, 0x13, 0x14, 0x1F, 0x16, 0x17, |
| [0x08] = 0x00, 0x00, 0x00, 0x00, 0x1F, 0x1F, 0x1F, 0x1F, |
| [0x10] = 0x09, 0x1F, 0x1F, 0x10, 0x1F, 0x1F, 0x1F, 0x10, |
| [0x18] = 0x1F, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, |
| [0x20] = 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x00, 0x00, |
| [0x28] = 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| [0x30] = 0x12, 0x11, 0x12, 0x11, 0x12, 0x11, 0x12, 0x00, |
| [0x38] = 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| [0x40] = 0x11, 0x13, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| [0x48] = 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| [0x50] = 0x1F, 0x1F, 0x1F, 0x1F, 0x00, 0x00, 0x00, 0x00, |
| [0x58] = 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| [0x60] = 0x1F, 0x1F, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, |
| [0x68] = 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| [0x70] = 0x03, 0x0F, 0x06, 0x0E, 0x0A, 0x0B, 0x1F, 0x1F, |
| [0x78] = 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| }; |
| |
| /* |
| * This table defines the index into the picr/intr_data tables for each |
| * device. Any enabled device and slot that uses hardware interrupts should |
| * have an entry in this table to define its index into the FCH PCI_INTR |
| * register 0xC00/0xC01. This index will define the interrupt that it should |
| * use. Putting PIRQ_A into the PIN A index for a device will tell that |
| * device to use PIC IRQ 10 if it uses PIN A for its hardware INT. |
| */ |
| static const struct pirq_struct mainboard_pirq_data[] = { |
| { PCIE0_DEVFN, { PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D } }, |
| { PCIE1_DEVFN, { PIRQ_B, PIRQ_C, PIRQ_D, PIRQ_A } }, |
| { PCIE2_DEVFN, { PIRQ_C, PIRQ_D, PIRQ_A, PIRQ_B } }, |
| { PCIE3_DEVFN, { PIRQ_D, PIRQ_A, PIRQ_B, PIRQ_C } }, |
| { PCIE4_DEVFN, { PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D } }, |
| { HDA0_DEVFN, { PIRQ_NC, PIRQ_HDA, PIRQ_NC, PIRQ_NC } }, |
| { SD_DEVFN, { PIRQ_SD, PIRQ_NC, PIRQ_NC, PIRQ_NC } }, |
| { SMBUS_DEVFN, { PIRQ_SMBUS, PIRQ_NC, PIRQ_NC, PIRQ_NC } }, |
| { SATA_DEVFN, { PIRQ_SATA, PIRQ_NC, PIRQ_NC, PIRQ_NC } }, |
| { EHCI1_DEVFN, { PIRQ_EHCI, PIRQ_NC, PIRQ_NC, PIRQ_NC } }, |
| { XHCI_DEVFN, { PIRQ_XHCI, PIRQ_NC, PIRQ_NC, PIRQ_NC } }, |
| }; |
| |
| /* PIRQ Setup */ |
| static void pirq_setup(void) |
| { |
| pirq_data_ptr = mainboard_pirq_data; |
| pirq_data_size = ARRAY_SIZE(mainboard_pirq_data); |
| intr_data_ptr = mainboard_intr_data; |
| picr_data_ptr = mainboard_picr_data; |
| } |
| |
| void __weak variant_devtree_update(void) |
| { |
| /* Override dev tree settings per board */ |
| } |
| |
| static void mainboard_init(void *chip_info) |
| { |
| int boardid = board_id(); |
| size_t num_gpios; |
| const struct soc_amd_gpio *gpios; |
| |
| printk(BIOS_INFO, "Board ID: %d\n", boardid); |
| |
| mainboard_ec_init(); |
| |
| gpios = variant_gpio_table(&num_gpios); |
| gpio_configure_pads(gpios, num_gpios); |
| |
| /* Initialize i2c buses that were not initialized in bootblock */ |
| i2c_soc_init(); |
| |
| /* Set GenIntDisable so that GPIO 90 is configured as a GPIO. */ |
| pm_write8(PM_PCIB_CFG, pm_read8(PM_PCIB_CFG) | PM_GENINT_DISABLE); |
| |
| /* Set low-power mode for BayHub eMMC bridge's PCIe clock. */ |
| clrsetbits32(acpimmio_misc + GPP_CLK_CNTRL, |
| GPP_CLK2_REQ_MAP_MASK, |
| GPP_CLK2_REQ_MAP_CLK_REQ2 << |
| GPP_CLK2_REQ_MAP_SHIFT); |
| |
| /* Same for the WiFi */ |
| clrsetbits32(acpimmio_misc + GPP_CLK_CNTRL, |
| GPP_CLK0_REQ_MAP_MASK, |
| GPP_CLK0_REQ_MAP_CLK_REQ0 << |
| GPP_CLK0_REQ_MAP_SHIFT); |
| |
| variant_devtree_update(); |
| } |
| |
| /************************************************* |
| * Dedicated mainboard function |
| *************************************************/ |
| static void mainboard_enable(struct device *dev) |
| { |
| /* Initialize the PIRQ data structures for consumption */ |
| pirq_setup(); |
| |
| } |
| |
| int mainboard_get_xhci_oc_map(uint16_t *map) |
| { |
| return variant_get_xhci_oc_map(map); |
| } |
| |
| int mainboard_get_ehci_oc_map(uint16_t *map) |
| { |
| return variant_get_ehci_oc_map(map); |
| } |
| |
| void mainboard_suspend_resume(void) |
| { |
| variant_mainboard_suspend_resume(); |
| } |
| |
| struct chip_operations mainboard_ops = { |
| .init = mainboard_init, |
| .enable_dev = mainboard_enable, |
| }; |
| |
| /* Variants may override these functions so see definitions in variants/ */ |
| uint8_t __weak variant_board_sku(void) |
| { |
| return 0; |
| } |
| |
| void __weak variant_mainboard_suspend_resume(void) |
| { |
| } |
| |
| const char *smbios_system_sku(void) |
| { |
| static char sku_str[7]; /* sku{0..255} */ |
| |
| snprintf(sku_str, sizeof(sku_str), "sku%d", variant_board_sku()); |
| |
| return sku_str; |
| } |