| /* |
| * This file is part of the coreboot project. |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <arch/acpigen.h> |
| #include <arch/ioapic.h> |
| #include <arch/smp/mpspec.h> |
| #include <bootstate.h> |
| #include <cbmem.h> |
| #include <cf9_reset.h> |
| #include <console/console.h> |
| #include <cpu/intel/turbo.h> |
| #include <cpu/x86/msr.h> |
| #include <cpu/x86/smm.h> |
| #include <intelblocks/acpi.h> |
| #include <intelblocks/msr.h> |
| #include <intelblocks/pmclib.h> |
| #include <intelblocks/uart.h> |
| #include <soc/gpio.h> |
| #include <soc/iomap.h> |
| #include <soc/nvs.h> |
| #include <soc/pm.h> |
| #include <string.h> |
| |
| __attribute__((weak)) unsigned long acpi_fill_mcfg(unsigned long current) |
| { |
| /* PCI Segment Group 0, Start Bus Number 0, End Bus Number is 255 */ |
| current += acpi_create_mcfg_mmconfig((void *)current, |
| CONFIG_MMCONF_BASE_ADDRESS, 0, 0, |
| (CONFIG_SA_PCIEX_LENGTH >> 20) - 1); |
| return current; |
| } |
| |
| static int acpi_sci_irq(void) |
| { |
| int sci_irq = 9; |
| uint32_t scis; |
| |
| scis = soc_read_sci_irq_select(); |
| scis &= SCI_IRQ_SEL; |
| scis >>= SCI_IRQ_ADJUST; |
| |
| /* Determine how SCI is routed. */ |
| switch (scis) { |
| case SCIS_IRQ9: |
| case SCIS_IRQ10: |
| case SCIS_IRQ11: |
| sci_irq = scis - SCIS_IRQ9 + 9; |
| break; |
| case SCIS_IRQ20: |
| case SCIS_IRQ21: |
| case SCIS_IRQ22: |
| case SCIS_IRQ23: |
| sci_irq = scis - SCIS_IRQ20 + 20; |
| break; |
| default: |
| printk(BIOS_DEBUG, "Invalid SCI route! Defaulting to IRQ9.\n"); |
| sci_irq = 9; |
| break; |
| } |
| |
| printk(BIOS_DEBUG, "SCI is IRQ%d\n", sci_irq); |
| return sci_irq; |
| } |
| |
| static unsigned long acpi_madt_irq_overrides(unsigned long current) |
| { |
| int sci = acpi_sci_irq(); |
| uint16_t flags = MP_IRQ_TRIGGER_LEVEL; |
| |
| /* INT_SRC_OVR */ |
| current += acpi_create_madt_irqoverride((void *)current, 0, 0, 2, 0); |
| |
| flags |= soc_madt_sci_irq_polarity(sci); |
| |
| /* SCI */ |
| current += |
| acpi_create_madt_irqoverride((void *)current, 0, sci, sci, flags); |
| |
| return current; |
| } |
| |
| unsigned long acpi_fill_madt(unsigned long current) |
| { |
| /* Local APICs */ |
| current = acpi_create_madt_lapics(current); |
| |
| /* IOAPIC */ |
| current += acpi_create_madt_ioapic((void *)current, 2, IO_APIC_ADDR, 0); |
| |
| return acpi_madt_irq_overrides(current); |
| } |
| |
| __weak void soc_fill_fadt(acpi_fadt_t *fadt) |
| { |
| } |
| |
| void acpi_fill_fadt(acpi_fadt_t *fadt) |
| { |
| const uint16_t pmbase = ACPI_BASE_ADDRESS; |
| |
| /* Use ACPI 3.0 revision. */ |
| fadt->header.revision = get_acpi_table_revision(FADT); |
| |
| fadt->sci_int = acpi_sci_irq(); |
| fadt->smi_cmd = APM_CNT; |
| fadt->acpi_enable = APM_CNT_ACPI_ENABLE; |
| fadt->acpi_disable = APM_CNT_ACPI_DISABLE; |
| fadt->s4bios_req = 0x0; |
| fadt->pstate_cnt = 0; |
| |
| fadt->pm1a_evt_blk = pmbase + PM1_STS; |
| fadt->pm1b_evt_blk = 0x0; |
| fadt->pm1a_cnt_blk = pmbase + PM1_CNT; |
| fadt->pm1b_cnt_blk = 0x0; |
| |
| fadt->gpe0_blk = pmbase + GPE0_STS(0); |
| |
| fadt->pm1_evt_len = 4; |
| fadt->pm1_cnt_len = 2; |
| |
| /* GPE0 STS/EN pairs each 32 bits wide. */ |
| fadt->gpe0_blk_len = 2 * GPE0_REG_MAX * sizeof(uint32_t); |
| |
| fadt->flush_size = 0x400; /* twice of cache size */ |
| fadt->flush_stride = 0x10; /* Cache line width */ |
| fadt->duty_offset = 1; |
| fadt->day_alrm = 0xd; |
| |
| fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED | |
| ACPI_FADT_C2_MP_SUPPORTED | ACPI_FADT_SLEEP_BUTTON | |
| ACPI_FADT_RESET_REGISTER | ACPI_FADT_SEALED_CASE | |
| ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_PLATFORM_CLOCK; |
| |
| fadt->reset_reg.space_id = 1; |
| fadt->reset_reg.bit_width = 8; |
| fadt->reset_reg.addrl = RST_CNT; |
| fadt->reset_value = RST_CPU | SYS_RST; |
| |
| fadt->x_pm1a_evt_blk.space_id = 1; |
| fadt->x_pm1a_evt_blk.bit_width = fadt->pm1_evt_len * 8; |
| fadt->x_pm1a_evt_blk.addrl = pmbase + PM1_STS; |
| |
| fadt->x_pm1b_evt_blk.space_id = 1; |
| |
| fadt->x_pm1a_cnt_blk.space_id = 1; |
| fadt->x_pm1a_cnt_blk.bit_width = fadt->pm1_cnt_len * 8; |
| fadt->x_pm1a_cnt_blk.addrl = pmbase + PM1_CNT; |
| |
| fadt->x_pm1b_cnt_blk.space_id = 1; |
| |
| fadt->x_gpe1_blk.space_id = 1; |
| |
| soc_fill_fadt(fadt); |
| } |
| |
| unsigned long southbridge_write_acpi_tables(struct device *device, |
| unsigned long current, |
| struct acpi_rsdp *rsdp) |
| { |
| current = acpi_write_dbg2_pci_uart(rsdp, current, |
| uart_get_device(), |
| ACPI_ACCESS_SIZE_DWORD_ACCESS); |
| return acpi_write_hpet(device, current, rsdp); |
| } |
| |
| __weak |
| uint32_t acpi_fill_soc_wake(uint32_t generic_pm1_en, |
| const struct chipset_power_state *ps) |
| { |
| return generic_pm1_en; |
| } |
| |
| #if CONFIG(SOC_INTEL_COMMON_ACPI_WAKE_SOURCE) |
| /* |
| * Save wake source information for calculating ACPI _SWS values |
| * |
| * @pm1: PM1_STS register with only enabled events set |
| * @gpe0: GPE0_STS registers with only enabled events set |
| * |
| * return the number of registers in the gpe0 array or -1 if nothing |
| * is provided by this function. |
| */ |
| |
| static int acpi_fill_wake(uint32_t *pm1, uint32_t **gpe0) |
| { |
| struct chipset_power_state *ps; |
| static uint32_t gpe0_sts[GPE0_REG_MAX]; |
| uint32_t pm1_en; |
| int i; |
| |
| ps = cbmem_find(CBMEM_ID_POWER_STATE); |
| if (ps == NULL) |
| return -1; |
| |
| /* |
| * PM1_EN to check the basic wake events which can happen through |
| * powerbtn or any other wake source like lidopen, key board press etc. |
| */ |
| pm1_en = ps->pm1_en; |
| |
| pm1_en = acpi_fill_soc_wake(pm1_en, ps); |
| |
| *pm1 = ps->pm1_sts & pm1_en; |
| |
| /* Mask off GPE0 status bits that are not enabled */ |
| *gpe0 = &gpe0_sts[0]; |
| for (i = 0; i < GPE0_REG_MAX; i++) |
| gpe0_sts[i] = ps->gpe0_sts[i] & ps->gpe0_en[i]; |
| |
| return GPE0_REG_MAX; |
| } |
| #endif |
| |
| __weak void acpi_create_gnvs(struct global_nvs_t *gnvs) |
| { |
| } |
| |
| void southbridge_inject_dsdt(struct device *device) |
| { |
| struct global_nvs_t *gnvs; |
| |
| gnvs = cbmem_find(CBMEM_ID_ACPI_GNVS); |
| if (!gnvs) { |
| gnvs = cbmem_add(CBMEM_ID_ACPI_GNVS, sizeof(*gnvs)); |
| if (gnvs) |
| memset(gnvs, 0, sizeof(*gnvs)); |
| } |
| |
| if (gnvs) { |
| acpi_create_gnvs(gnvs); |
| /* And tell SMI about it */ |
| smm_setup_structures(gnvs, NULL, NULL); |
| |
| /* Add it to DSDT. */ |
| acpigen_write_scope("\\"); |
| acpigen_write_name_dword("NVSA", (uintptr_t) gnvs); |
| acpigen_pop_len(); |
| } |
| } |
| |
| static int calculate_power(int tdp, int p1_ratio, int ratio) |
| { |
| u32 m; |
| u32 power; |
| |
| /* |
| * M = ((1.1 - ((p1_ratio - ratio) * 0.00625)) / 1.1) ^ 2 |
| * |
| * Power = (ratio / p1_ratio) * m * tdp |
| */ |
| |
| m = (110000 - ((p1_ratio - ratio) * 625)) / 11; |
| m = (m * m) / 1000; |
| |
| power = ((ratio * 100000 / p1_ratio) / 100); |
| power *= (m / 100) * (tdp / 1000); |
| power /= 1000; |
| |
| return power; |
| } |
| |
| static int get_cores_per_package(void) |
| { |
| struct cpuinfo_x86 c; |
| struct cpuid_result result; |
| int cores = 1; |
| |
| get_fms(&c, cpuid_eax(1)); |
| if (c.x86 != 6) |
| return 1; |
| |
| result = cpuid_ext(0xb, 1); |
| cores = result.ebx & 0xff; |
| |
| return cores; |
| } |
| |
| static void generate_c_state_entries(void) |
| { |
| acpi_cstate_t *c_state_map; |
| size_t entries; |
| |
| c_state_map = soc_get_cstate_map(&entries); |
| |
| /* Generate C-state tables */ |
| acpigen_write_CST_package(c_state_map, entries); |
| } |
| |
| void generate_p_state_entries(int core, int cores_per_package) |
| { |
| int ratio_min, ratio_max, ratio_turbo, ratio_step; |
| int coord_type, power_max, num_entries; |
| int ratio, power, clock, clock_max; |
| bool turbo; |
| |
| coord_type = cpu_get_coord_type(); |
| ratio_min = cpu_get_min_ratio(); |
| ratio_max = cpu_get_max_ratio(); |
| clock_max = (ratio_max * cpu_get_bus_clock()) / KHz; |
| turbo = (get_turbo_state() == TURBO_ENABLED); |
| |
| /* Calculate CPU TDP in mW */ |
| power_max = cpu_get_power_max(); |
| |
| /* Write _PCT indicating use of FFixedHW */ |
| acpigen_write_empty_PCT(); |
| |
| /* Write _PPC with no limit on supported P-state */ |
| acpigen_write_PPC_NVS(); |
| /* Write PSD indicating configured coordination type */ |
| acpigen_write_PSD_package(core, 1, coord_type); |
| |
| /* Add P-state entries in _PSS table */ |
| acpigen_write_name("_PSS"); |
| |
| /* Determine ratio points */ |
| ratio_step = PSS_RATIO_STEP; |
| do { |
| num_entries = ((ratio_max - ratio_min) / ratio_step) + 1; |
| if (((ratio_max - ratio_min) % ratio_step) > 0) |
| num_entries += 1; |
| if (turbo) |
| num_entries += 1; |
| if (num_entries > PSS_MAX_ENTRIES) |
| ratio_step += 1; |
| } while (num_entries > PSS_MAX_ENTRIES); |
| |
| /* _PSS package count depends on Turbo */ |
| acpigen_write_package(num_entries); |
| |
| /* P[T] is Turbo state if enabled */ |
| if (turbo) { |
| ratio_turbo = cpu_get_max_turbo_ratio(); |
| |
| /* Add entry for Turbo ratio */ |
| acpigen_write_PSS_package(clock_max + 1, /* MHz */ |
| power_max, /* mW */ |
| PSS_LATENCY_TRANSITION,/* lat1 */ |
| PSS_LATENCY_BUSMASTER,/* lat2 */ |
| ratio_turbo << 8, /* control */ |
| ratio_turbo << 8); /* status */ |
| num_entries -= 1; |
| } |
| |
| /* First regular entry is max non-turbo ratio */ |
| acpigen_write_PSS_package(clock_max, /* MHz */ |
| power_max, /* mW */ |
| PSS_LATENCY_TRANSITION,/* lat1 */ |
| PSS_LATENCY_BUSMASTER,/* lat2 */ |
| ratio_max << 8, /* control */ |
| ratio_max << 8); /* status */ |
| num_entries -= 1; |
| |
| /* Generate the remaining entries */ |
| for (ratio = ratio_min + ((num_entries - 1) * ratio_step); |
| ratio >= ratio_min; ratio -= ratio_step) { |
| |
| /* Calculate power at this ratio */ |
| power = calculate_power(power_max, ratio_max, ratio); |
| clock = (ratio * cpu_get_bus_clock()) / KHz; |
| |
| acpigen_write_PSS_package(clock, /* MHz */ |
| power, /* mW */ |
| PSS_LATENCY_TRANSITION,/* lat1 */ |
| PSS_LATENCY_BUSMASTER,/* lat2 */ |
| ratio << 8, /* control */ |
| ratio << 8); /* status */ |
| } |
| /* Fix package length */ |
| acpigen_pop_len(); |
| } |
| |
| __attribute__ ((weak)) acpi_tstate_t *soc_get_tss_table(int *entries) |
| { |
| *entries = 0; |
| return NULL; |
| } |
| |
| void generate_t_state_entries(int core, int cores_per_package) |
| { |
| acpi_tstate_t *soc_tss_table; |
| int entries; |
| |
| soc_tss_table = soc_get_tss_table(&entries); |
| if (entries == 0) |
| return; |
| |
| /* Indicate SW_ALL coordination for T-states */ |
| acpigen_write_TSD_package(core, cores_per_package, SW_ALL); |
| |
| /* Indicate FixedHW so OS will use MSR */ |
| acpigen_write_empty_PTC(); |
| |
| /* Set NVS controlled T-state limit */ |
| acpigen_write_TPC("\\TLVL"); |
| |
| /* Write TSS table for MSR access */ |
| acpigen_write_TSS_package(entries, soc_tss_table); |
| } |
| |
| __weak void soc_power_states_generation(int core_id, |
| int cores_per_package) |
| { |
| } |
| |
| void generate_cpu_entries(struct device *device) |
| { |
| int core_id, cpu_id, pcontrol_blk = ACPI_BASE_ADDRESS; |
| int plen = 6; |
| int totalcores = dev_count_cpu(); |
| int cores_per_package = get_cores_per_package(); |
| int numcpus = totalcores / cores_per_package; |
| |
| printk(BIOS_DEBUG, "Found %d CPU(s) with %d core(s) each.\n", |
| numcpus, cores_per_package); |
| |
| for (cpu_id = 0; cpu_id < numcpus; cpu_id++) { |
| for (core_id = 0; core_id < cores_per_package; core_id++) { |
| if (core_id > 0) { |
| pcontrol_blk = 0; |
| plen = 0; |
| } |
| |
| /* Generate processor \_SB.CPUx */ |
| acpigen_write_processor((cpu_id) * cores_per_package + |
| core_id, pcontrol_blk, plen); |
| |
| /* Generate C-state tables */ |
| generate_c_state_entries(); |
| |
| /* Soc specific power states generation */ |
| soc_power_states_generation(core_id, cores_per_package); |
| |
| acpigen_pop_len(); |
| } |
| } |
| /* PPKG is usually used for thermal management |
| of the first and only package. */ |
| acpigen_write_processor_package("PPKG", 0, cores_per_package); |
| |
| /* Add a method to notify processor nodes */ |
| acpigen_write_processor_cnot(cores_per_package); |
| } |
| |
| #if CONFIG(SOC_INTEL_COMMON_ACPI_WAKE_SOURCE) |
| /* Save wake source data for ACPI _SWS methods in NVS */ |
| static void acpi_save_wake_source(void *unused) |
| { |
| global_nvs_t *gnvs = cbmem_find(CBMEM_ID_ACPI_GNVS); |
| uint32_t pm1, *gpe0; |
| int gpe_reg, gpe_reg_count; |
| int reg_size = sizeof(uint32_t) * 8; |
| |
| if (!gnvs) |
| return; |
| |
| gnvs->pm1i = -1; |
| gnvs->gpei = -1; |
| |
| gpe_reg_count = acpi_fill_wake(&pm1, &gpe0); |
| if (gpe_reg_count < 0) |
| return; |
| |
| /* Scan for first set bit in PM1 */ |
| for (gnvs->pm1i = 0; gnvs->pm1i < reg_size; gnvs->pm1i++) { |
| if (pm1 & 1) |
| break; |
| pm1 >>= 1; |
| } |
| |
| /* If unable to determine then return -1 */ |
| if (gnvs->pm1i >= 16) |
| gnvs->pm1i = -1; |
| |
| /* Scan for first set bit in GPE registers */ |
| for (gpe_reg = 0; gpe_reg < gpe_reg_count; gpe_reg++) { |
| uint32_t gpe = gpe0[gpe_reg]; |
| int start = gpe_reg * reg_size; |
| int end = start + reg_size; |
| |
| if (gpe == 0) { |
| if (!gnvs->gpei) |
| gnvs->gpei = end; |
| continue; |
| } |
| |
| for (gnvs->gpei = start; gnvs->gpei < end; gnvs->gpei++) { |
| if (gpe & 1) |
| break; |
| gpe >>= 1; |
| } |
| } |
| |
| /* If unable to determine then return -1 */ |
| if (gnvs->gpei >= gpe_reg_count * reg_size) |
| gnvs->gpei = -1; |
| |
| printk(BIOS_DEBUG, "ACPI _SWS is PM1 Index %lld GPE Index %lld\n", |
| (long long)gnvs->pm1i, (long long)gnvs->gpei); |
| } |
| |
| BOOT_STATE_INIT_ENTRY(BS_OS_RESUME, BS_ON_ENTRY, acpi_save_wake_source, NULL); |
| |
| #endif |