| - Store everything in arch
| - The configuration language has been cleaned up. No more link keyword.
| - Everything is now in the device tree.
| - The static and dynamic device trees have been unified
| - Support for setting the pci subsystem vendor and pci subsystem device has been added.
| - 64bit resource support
| - Generic smbus support
| - pnp/superio devices are now handled cleanly with very little code
| - Initial support for finding x86 BIST errors
| - static resource assignments can now be specified in Config.lb
| - special VGA I/O decode now should work
| - added generic PCI error reporting enables
| - build_opt_tbl now generates a header that allows cmos settings to
| be read from romcc compiled code.
| - split IORESOURCE_SET into IORESOURCE_ASSIGNED and IORESOURCE_STORED
| - romcc now gracesfully handles function pointers instead of dying mysteriously
| - First regression test in amdk8/raminit_test
| - O2, enums, and switch statements work in romcc
| - Support for compiling romcc on non x86 platforms
| - new romc options -msse and -mmmx for specifying extra registers to use
| - Bug fixes to device the device disable/enable framework and an amd8111 implementation
| - Move the link specification to the chip specification instead of the path
| - Allow specifying devices with internal bridges.
| - Initial via epia support
| - Opteron errata fixes
| Major restructuring of hypertransport handling.
| Major rewerite of superio/NSC/pc87360 as a proof of concept for handling superio resources dynamically
| Updates to hard_reset handling when resetting because of the need to change hypertransport link
| speeds and widths.
| (a) No longer assume the boot is good just because we get to a hard reset point.
| (b) Set a flag to indicate that the BIOS triggered the reset so we don't decrement the
| boot counter.
| Updates to arima/hdama mptable so it tracks the new bus numbers
| Major update of the dyanmic device tree to so it can handle
| * subtractive resources
| * merging with the static device tree
| * more device types than just pci
| Add back in the hard_reset method from freebios1 this allows generic
| code to reset the box.
| Update the hypertransport setup code to automatically optimize
| hypertransport link widths and frequencies, and to call hard_reset
| if necessary for the changes to go into effect.
| Updates to the new configuration system so it works more reliably
| Removed a bunch of unused configuration variables
| Removed a bunch of unused assembly code
| A whole bunch of random ppc and opteron work we never put a good label on
|Intial development release of LinuxBIOS.
|Everything is thrown overboard and will be reincluded as necessary so we can
|get rid of the legacy baggage. Since LinuxBIOS was started we have developed
|some better techniques for some things, but we still hang on to the old ways
|because some ports that we want not to break depend on them. So we preserve
|them by preserve the 1.0.x series and keeping only the best practices for
|the 1.1.x series. When there is a stable port this code base will
|become LinuxBIOS 2.0.x and the core will become frozen.