| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #ifndef MENDOCINO_CHIP_H |
| #define MENDOCINO_CHIP_H |
| |
| #include <amdblocks/chip.h> |
| #include <amdblocks/i2c.h> |
| #include <amdblocks/pci_clk_req.h> |
| #include <gpio.h> |
| #include <soc/i2c.h> |
| #include <soc/southbridge.h> |
| #include <drivers/i2c/designware/dw_i2c.h> |
| #include <types.h> |
| #include <vendorcode/amd/fsp/mendocino/FspUsb.h> |
| |
| /* force USB3 port to gen1, bit0 - controller0 Port0, bit1 - Port1, etc */ |
| union __packed usb3_force_gen1 { |
| struct { |
| uint8_t xhci0_port0:1; |
| uint8_t xhci1_port0:1; |
| uint8_t xhci1_port1:1; |
| } ports; |
| uint8_t usb3_port_force_gen1_en; |
| }; |
| |
| struct soc_amd_mendocino_config { |
| struct soc_amd_common_config common_config; |
| u8 i2c_scl_reset; |
| struct dw_i2c_bus_config i2c[I2C_CTRLR_COUNT]; |
| struct i2c_pad_control i2c_pad[I2C_CTRLR_COUNT]; |
| |
| /* Enable S0iX support */ |
| bool s0ix_enable; |
| |
| enum { |
| DOWNCORE_AUTO = 0, |
| DOWNCORE_1 = 1, /* Run with 1 physical core */ |
| DOWNCORE_2 = 3, /* Run with 2 physical cores */ |
| DOWNCORE_3 = 4, /* Run with 3 physical cores */ |
| DOWNCORE_4 = 6, /* Run with 4 physical cores */ |
| DOWNCORE_5 = 8, /* Run with 5 physical cores */ |
| DOWNCORE_6 = 9, /* Run with 6 physical cores */ |
| DOWNCORE_7 = 10, /* Run with 7 physical cores */ |
| } downcore_mode; |
| bool disable_smt; /* disable second thread on all physical cores */ |
| |
| uint8_t stt_control; |
| uint8_t stt_pcb_sensor_count; |
| uint16_t stt_min_limit; |
| uint16_t stt_m1; |
| uint16_t stt_m2; |
| uint16_t stt_m3; |
| uint16_t stt_m4; |
| uint16_t stt_m5; |
| uint16_t stt_m6; |
| uint16_t stt_c_apu; |
| uint16_t stt_c_gpu; |
| uint16_t stt_c_hs2; |
| uint16_t stt_alpha_apu; |
| uint16_t stt_alpha_gpu; |
| uint16_t stt_alpha_hs2; |
| uint16_t stt_skin_temp_apu; |
| uint16_t stt_skin_temp_gpu; |
| uint16_t stt_skin_temp_hs2; |
| uint16_t stt_error_coeff; |
| uint16_t stt_error_rate_coefficient; |
| |
| /* Default */ |
| uint8_t stapm_boost; |
| uint32_t stapm_time_constant_s; |
| uint32_t apu_only_sppt_limit; |
| uint32_t sustained_power_limit_mW; |
| uint32_t fast_ppt_limit_mW; |
| uint32_t slow_ppt_limit_mW; |
| uint32_t slow_ppt_time_constant_s; |
| uint32_t thermctl_limit_degreeC; |
| uint32_t vrm_current_limit_mA; |
| uint32_t vrm_maximum_current_limit_mA; |
| uint32_t vrm_soc_current_limit_mA; |
| /* Throttle (e.g., Low/No Battery) */ |
| uint32_t vrm_current_limit_throttle_mA; |
| uint32_t vrm_maximum_current_limit_throttle_mA; |
| uint32_t vrm_soc_current_limit_throttle_mA; |
| |
| /* tablet mode.*/ |
| uint16_t stt_m1_tablet; |
| uint16_t stt_m2_tablet; |
| uint16_t stt_c_apu_tablet; |
| uint16_t stt_alpha_apu_tablet; |
| |
| /* Thermal profile B*/ |
| uint32_t fast_ppt_limit_mW_B; |
| uint32_t slow_ppt_limit_mW_B; |
| uint32_t slow_ppt_time_constant_s_B; |
| uint16_t stt_min_limit_B; |
| uint16_t stt_m1_B; |
| uint16_t stt_m2_B; |
| uint16_t stt_c_apu_B; |
| uint16_t stt_skin_temp_apu_B; |
| |
| /* Thermal profile C*/ |
| uint32_t fast_ppt_limit_mW_C; |
| uint32_t slow_ppt_limit_mW_C; |
| uint32_t slow_ppt_time_constant_s_C; |
| uint16_t stt_min_limit_C; |
| uint16_t stt_m1_C; |
| uint16_t stt_m2_C; |
| uint16_t stt_c_apu_C; |
| uint16_t stt_skin_temp_apu_C; |
| |
| /* Thermal profile D*/ |
| uint32_t fast_ppt_limit_mW_D; |
| uint32_t slow_ppt_limit_mW_D; |
| uint32_t slow_ppt_time_constant_s_D; |
| uint16_t stt_min_limit_D; |
| uint16_t stt_m1_D; |
| uint16_t stt_m2_D; |
| uint16_t stt_c_apu_D; |
| uint16_t stt_skin_temp_apu_D; |
| |
| /* Thermal profile E*/ |
| uint32_t fast_ppt_limit_mW_E; |
| uint32_t slow_ppt_limit_mW_E; |
| uint32_t slow_ppt_time_constant_s_E; |
| uint16_t stt_min_limit_E; |
| uint16_t stt_m1_E; |
| uint16_t stt_m2_E; |
| uint16_t stt_c_apu_E; |
| uint16_t stt_skin_temp_apu_E; |
| |
| |
| /* Thermal profile F*/ |
| uint32_t fast_ppt_limit_mW_F; |
| uint32_t slow_ppt_limit_mW_F; |
| uint32_t slow_ppt_time_constant_s_F; |
| uint16_t stt_min_limit_F; |
| uint16_t stt_m1_F; |
| uint16_t stt_m2_F; |
| uint16_t stt_c_apu_F; |
| uint16_t stt_skin_temp_apu_F; |
| |
| uint8_t smartshift_enable; |
| |
| uint8_t system_configuration; |
| |
| uint8_t cppc_ctrl; |
| uint8_t cppc_perf_limit_max_range; |
| uint8_t cppc_perf_limit_min_range; |
| uint8_t cppc_epp_max_range; |
| uint8_t cppc_epp_min_range; |
| uint8_t cppc_preferred_cores; |
| |
| /* telemetry settings */ |
| uint32_t telemetry_vddcrvddfull_scale_current_mA; |
| uint32_t telemetry_vddcrvddoffset; |
| uint32_t telemetry_vddcrsocfull_scale_current_mA; |
| uint32_t telemetry_vddcrsocoffset; |
| |
| /* The array index is the general purpose PCIe clock output number. Values in here |
| aren't the values written to the register to have the default to be always on. */ |
| enum gpp_clk_req gpp_clk_config[GPP_CLK_OUTPUT_AVAILABLE]; |
| |
| /* performance policy for the PCIe links: power consumption vs. link speed */ |
| enum { |
| DXIO_PSPP_DISABLED = 0, |
| DXIO_PSPP_PERFORMANCE, |
| DXIO_PSPP_BALANCED, |
| DXIO_PSPP_POWERSAVE, |
| } pspp_policy; |
| |
| uint8_t usb_phy_custom; |
| struct usb_phy_config usb_phy; |
| /* Set for PCIe optimization w/a and a double confirming on the result of PCIe Signal |
| Integrity is highly recommended. */ |
| uint8_t dxio_tx_vboost_enable; |
| |
| /* Force USB3 port to gen1, bit0 - controller0 Port0, bit1 - Port1 */ |
| union usb3_force_gen1 usb3_port_force_gen1; |
| |
| /* Set for eDP power sequence adjustment timing T8 (from varybl to blon). */ |
| uint8_t edp_panel_t8_ms; |
| /* Set for eDP power sequence adjustment timing T9 (from bloff to varybloff). */ |
| uint8_t edp_panel_t9_ms; |
| |
| }; |
| |
| #endif /* MENDOCINO_CHIP_H */ |