| fw_config |
| field AUDIO 8 10 |
| option NONE 0 |
| option MTL_ALC1019_ALC5682I_I2S 1 |
| option MTL_MAX98373_ALC5682_SNDW 2 |
| option MTL_ALC711_SNDW 3 |
| option MTL_ALC5682I_MAX9857A_I2S 4 |
| end |
| end |
| |
| chip soc/intel/meteorlake |
| |
| # GPE configuration |
| register "pmc_gpe0_dw0" = "GPP_B" |
| register "pmc_gpe0_dw1" = "GPP_D" |
| register "pmc_gpe0_dw2" = "GPP_E" |
| |
| # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f |
| register "gen1_dec" = "0x00fc0801" |
| register "gen2_dec" = "0x000c0201" |
| # EC memory map range is 0x900-0x9ff |
| register "gen3_dec" = "0x00fc0901" |
| |
| register "serial_io_uart_mode" = "{ |
| [PchSerialIoIndexUART0] = PchSerialIoPci, |
| [PchSerialIoIndexUART1] = PchSerialIoDisabled, |
| [PchSerialIoIndexUART2] = PchSerialIoDisabled, |
| }" |
| |
| register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" # USB2_C0 |
| register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC0)" # USB2_C1 |
| register "usb2_ports[2]" = "USB2_PORT_TYPE_C(OC0)" # USB2_C2 |
| register "usb2_ports[3]" = "USB2_PORT_TYPE_C(OC0)" # USB2_C3 |
| register "usb2_ports[4]" = "USB2_PORT_MID(OC0)" # Type-A Port A0 |
| register "usb2_ports[5]" = "USB2_PORT_MID(OC0)" # Type-A Port A1 |
| register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # FPS connector |
| register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # M.2 WWAN / MCF |
| register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)" # MCF / M.2 WWAN |
| register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # M.2 WLAN |
| |
| register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # USB3.2_Type-A1 / M.2 WWAN |
| register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)" # USB3.2_Type-A0 / USB Flex Connector |
| |
| register "tcss_ports[0]" = "TCSS_PORT_DEFAULT(OC0)" |
| register "tcss_ports[1]" = "TCSS_PORT_DEFAULT(OC0)" |
| register "tcss_ports[2]" = "TCSS_PORT_DEFAULT(OC0)" |
| register "tcss_ports[3]" = "TCSS_PORT_DEFAULT(OC0)" |
| |
| # Enable CNVi BT |
| register "cnvi_bt_core" = "true" |
| |
| # Enable S0ix |
| register "s0ix_enable" = "1" |
| |
| # Enable EDP in PortA |
| register "ddi_port_A_config" = "1" |
| # Enable HDMI in Port B |
| register "ddi_ports_config" = "{ |
| [DDI_PORT_B] = DDI_ENABLE_HPD | DDI_ENABLE_DDC, |
| }" |
| |
| register "serial_io_i2c_mode" = "{ |
| [PchSerialIoIndexI2C0] = PchSerialIoPci, |
| [PchSerialIoIndexI2C1] = PchSerialIoPci, |
| [PchSerialIoIndexI2C2] = PchSerialIoDisabled, |
| [PchSerialIoIndexI2C3] = PchSerialIoPci, |
| [PchSerialIoIndexI2C4] = PchSerialIoDisabled, |
| [PchSerialIoIndexI2C5] = PchSerialIoDisabled, |
| }" |
| |
| # Intel Common SoC Config |
| register "common_soc_config" = "{ |
| .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, |
| .i2c[0] = { |
| .speed = I2C_SPEED_FAST, |
| }, |
| .i2c[1] = { |
| .speed = I2C_SPEED_FAST, |
| }, |
| .i2c[3] = { |
| .speed = I2C_SPEED_FAST, |
| }, |
| }" |
| |
| register "serial_io_gspi_mode" = "{ |
| [PchSerialIoIndexGSPI0] = PchSerialIoDisabled, |
| [PchSerialIoIndexGSPI1] = PchSerialIoPci, |
| }" |
| |
| register "serial_io_gspi_cs_mode" = "{ |
| [PchSerialIoIndexGSPI0] = 0, |
| [PchSerialIoIndexGSPI1] = 0, |
| }" |
| |
| register "serial_io_gspi_cs_state" = "{ |
| [PchSerialIoIndexGSPI0] = 0, |
| [PchSerialIoIndexGSPI1] = 0, |
| }" |
| |
| # HD Audio |
| register "pch_hda_dsp_enable" = "1" |
| register "pch_hda_idisp_link_tmode" = "HDA_TMODE_8T" |
| register "pch_hda_idisp_link_frequency" = "HDA_LINKFREQ_96MHZ" |
| register "pch_hda_idisp_codec_enable" = "1" |
| |
| # DPTF enable |
| register "dptf_enable" = "1" |
| |
| device domain 0 on |
| device ref igpu on end |
| device ref ipu on |
| chip drivers/intel/mipi_camera |
| register "acpi_uid" = "0x50000" |
| register "acpi_name" = ""IPU0"" |
| register "device_type" = "INTEL_ACPI_CAMERA_CIO2" |
| register "cio2_num_ports" = "2" |
| register "cio2_lanes_used" = "{4,4}" |
| register "cio2_lane_endpoint[0]" = ""^I2C1.CAM0"" |
| register "cio2_lane_endpoint[1]" = ""^I2C0.CAM1"" |
| register "cio2_prt[0]" = "0" |
| register "cio2_prt[1]" = "4" |
| device generic 0 on end |
| end |
| end |
| device ref dtt on |
| chip drivers/intel/dptf |
| ## sensor information |
| register "options.tsr[0].desc" = ""Ambient"" |
| register "options.tsr[1].desc" = ""DDR"" |
| register "options.tsr[2].desc" = ""Skin"" |
| register "options.tsr[3].desc" = ""Battery"" |
| ## Active Policy |
| # TODO: below values are initial reference values only |
| register "policies.active" = "{ |
| [0] = { |
| .target = DPTF_CPU, |
| .thresholds = { |
| TEMP_PCT(95, 90), |
| TEMP_PCT(90, 80), |
| } |
| }, |
| [1] = { |
| .target = DPTF_TEMP_SENSOR_0, |
| .thresholds = { |
| TEMP_PCT(80, 90), |
| TEMP_PCT(70, 80), |
| } |
| } |
| }" |
| ## Passive Policy |
| # TODO: below values are initial reference values only |
| register "policies.passive" = "{ |
| [0] = DPTF_PASSIVE(CPU, CPU, 95, 10000), |
| [1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 85, 50000), |
| [2] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_1, 85, 50000), |
| [3] = DPTF_PASSIVE(CPU, TEMP_SENSOR_2, 85, 50000), |
| [4] = DPTF_PASSIVE(CPU, TEMP_SENSOR_3, 85, 50000), |
| }" |
| ## Critical Policy |
| # TODO: below values are initial reference values only |
| register "policies.critical" = "{ |
| [0] = DPTF_CRITICAL(CPU, 105, SHUTDOWN), |
| [1] = DPTF_CRITICAL(TEMP_SENSOR_0, 95, SHUTDOWN), |
| [2] = DPTF_CRITICAL(TEMP_SENSOR_1, 95, SHUTDOWN), |
| [3] = DPTF_CRITICAL(TEMP_SENSOR_2, 95, SHUTDOWN), |
| [4] = DPTF_CRITICAL(TEMP_SENSOR_3, 95, SHUTDOWN), |
| }" |
| ## Power Limits Control |
| register "controls.power_limits" = "{ |
| .pl1 = { |
| .min_power = 35000, |
| .max_power = 45000, |
| .time_window_min = 28 * MSECS_PER_SEC, |
| .time_window_max = 32 * MSECS_PER_SEC, |
| .granularity = 200, |
| }, |
| .pl2 = { |
| .min_power = 56000, |
| .max_power = 56000, |
| .time_window_min = 28 * MSECS_PER_SEC, |
| .time_window_max = 32 * MSECS_PER_SEC, |
| .granularity = 1000, |
| } |
| }" |
| ## Charger Performance Control (Control, mA) |
| register "controls.charger_perf" = "{ |
| [0] = { 255, 3000 }, |
| [1] = { 24, 1500 }, |
| [2] = { 16, 1000 }, |
| [3] = { 8, 500 } |
| }" |
| ## Fan Performance Control (Percent, Speed, Noise, Power) |
| register "controls.fan_perf" = "{ |
| [0] = { 90, 6700, 220, 2200, }, |
| [1] = { 80, 5800, 180, 1800, }, |
| [2] = { 70, 5000, 145, 1450, }, |
| [3] = { 60, 4900, 115, 1150, }, |
| [4] = { 50, 3838, 90, 900, }, |
| [5] = { 40, 2904, 55, 550, }, |
| [6] = { 30, 2337, 30, 300, }, |
| [7] = { 20, 1608, 15, 150, }, |
| [8] = { 10, 800, 10, 100, }, |
| [9] = { 0, 0, 0, 50, } |
| }" |
| ## Fan options |
| register "options.fan.fine_grained_control" = "1" |
| register "options.fan.step_size" = "2" |
| device generic 0 alias dptf_policy on end |
| end |
| end |
| device ref heci1 on end |
| device ref tbt_pcie_rp0 on end |
| device ref tbt_pcie_rp1 on end |
| device ref tbt_pcie_rp2 on end |
| device ref tbt_pcie_rp3 on end |
| device ref tcss_xhci on |
| chip drivers/usb/acpi |
| device ref tcss_root_hub on |
| chip drivers/usb/acpi |
| register "desc" = ""USB3 Type-C Port C0"" |
| register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" |
| register "group" = "ACPI_PLD_GROUP(4, 2)" |
| device ref tcss_usb3_port0 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB3 Type-C Port C1"" |
| register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" |
| register "group" = "ACPI_PLD_GROUP(3, 2)" |
| device ref tcss_usb3_port1 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB3 Type-C Port C2"" |
| register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" |
| register "group" = "ACPI_PLD_GROUP(2, 2)" |
| device ref tcss_usb3_port2 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB3 Type-C Port C3"" |
| register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" |
| register "group" = "ACPI_PLD_GROUP(1, 2)" |
| device ref tcss_usb3_port3 on end |
| end |
| end |
| end |
| end |
| device ref tcss_dma0 on |
| chip drivers/intel/usb4/retimer |
| register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B21)" |
| use tcss_usb3_port0 as dfp[0].typec_port |
| device generic 0 on end |
| end |
| chip drivers/intel/usb4/retimer |
| register "dfp[1].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B21)" |
| use tcss_usb3_port1 as dfp[1].typec_port |
| device generic 0 on end |
| end |
| end |
| device ref tcss_dma1 on |
| chip drivers/intel/usb4/retimer |
| register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B21)" |
| use tcss_usb3_port2 as dfp[0].typec_port |
| device generic 0 on end |
| end |
| chip drivers/intel/usb4/retimer |
| register "dfp[1].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B21)" |
| use tcss_usb3_port3 as dfp[1].typec_port |
| device generic 0 on end |
| end |
| end |
| device ref pcie_rp6 on |
| # Enable PCH PCIE x1 slot using CLK 3 |
| register "pcie_rp[PCIE_RP(6)]" = "{ |
| .clk_src = 3, |
| .clk_req = 3, |
| .flags = PCIE_RP_CLK_REQ_DETECT | PCIE_RP_LTR | PCIE_RP_AER, |
| }" |
| chip soc/intel/common/block/pcie/rtd3 |
| register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A18)" |
| register "enable_delay_ms" = "100" |
| register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A19)" |
| register "reset_delay_ms" = "20" |
| register "srcclk_pin" = "3" |
| device generic 0 on |
| end |
| end |
| end # PCIE x1 slot |
| device ref pcie_rp7 on |
| # Enable PCH PCIE RP 7 using CLK 1 |
| register "pcie_rp[PCIE_RP(7)]" = "{ |
| .clk_src = 1, |
| .clk_req = 1, |
| .flags = PCIE_RP_CLK_REQ_DETECT | PCIE_RP_LTR | PCIE_RP_AER, |
| }" |
| chip soc/intel/common/block/pcie/rtd3 |
| register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C05)" |
| register "reset_off_delay_ms" = "20" |
| register "srcclk_pin" = "1" |
| register "ext_pm_support" = "ACPI_PCIE_RP_EMIT_ALL" |
| register "skip_on_off_support" = "true" |
| register "use_rp_mutex" = "true" |
| device generic 0 alias rp7_rtd3 on end |
| end |
| chip drivers/wwan/fm |
| register "fcpo_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E07)" |
| register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A15)" |
| register "perst_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C05)" |
| register "wake_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_F10)" |
| register "add_acpi_dma_property" = "true" |
| use rp7_rtd3 as rtd3dev |
| device generic 0 on end |
| end |
| end # WWAN |
| device ref pcie_rp8 on |
| # Enable PCH PCIE RP 8 using CLK 5 |
| register "pcie_rp[PCIE_RP(8)]" = "{ |
| .clk_src = 5, |
| .clk_req = 5, |
| .flags = PCIE_RP_CLK_REQ_DETECT | PCIE_RP_LTR | PCIE_RP_AER, |
| }" |
| end # WLAN |
| device ref pcie_rp10 on |
| # Enable SSD Gen4 PCIE 10 using CLK 8 |
| register "pcie_rp[PCIE_RP(10)]" = "{ |
| .clk_src = 8, |
| .clk_req = 8, |
| .flags = PCIE_RP_CLK_REQ_DETECT | PCIE_RP_LTR | PCIE_RP_AER, |
| }" |
| end # PCIE10 SSD Gen4 |
| device ref pcie_rp11 on |
| # Enable SSD Gen4 PCIE 11 using CLK 7 |
| register "pcie_rp[PCIE_RP(11)]" = "{ |
| .clk_src = 7, |
| .clk_req = 7, |
| .flags = PCIE_RP_CLK_REQ_DETECT | PCIE_RP_LTR | PCIE_RP_AER, |
| }" |
| end # PCIE11 SSD Gen4 |
| device ref xhci on |
| chip drivers/usb/acpi |
| device ref xhci_root_hub on |
| chip drivers/usb/acpi |
| register "desc" = ""USB2 Type-A Port 1"" |
| register "type" = "UPC_TYPE_A" |
| register "group" = "ACPI_PLD_GROUP(1, 1)" |
| device ref usb2_port1 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB2 Type-A Port 2"" |
| register "type" = "UPC_TYPE_A" |
| register "group" = "ACPI_PLD_GROUP(2, 1)" |
| device ref usb2_port2 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB2 Type-A Port 3"" |
| register "type" = "UPC_TYPE_A" |
| register "group" = "ACPI_PLD_GROUP(3, 1)" |
| device ref usb2_port3 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB2 Type-A Port 4"" |
| register "type" = "UPC_TYPE_A" |
| register "group" = "ACPI_PLD_GROUP(4, 1)" |
| device ref usb2_port4 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB2 Type-A Port 5"" |
| register "type" = "UPC_TYPE_A" |
| register "group" = "ACPI_PLD_GROUP(5, 1)" |
| device ref usb2_port5 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB2 Type-A Port 6"" |
| register "type" = "UPC_TYPE_A" |
| register "group" = "ACPI_PLD_GROUP(6, 1)" |
| device ref usb2_port6 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB2 Type-A Port 7"" |
| register "type" = "UPC_TYPE_A" |
| register "group" = "ACPI_PLD_GROUP(7, 1)" |
| device ref usb2_port7 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB2 Type-A Port 8"" |
| register "type" = "UPC_TYPE_A" |
| register "group" = "ACPI_PLD_GROUP(8, 1)" |
| device ref usb2_port8 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB2 Type-A Port 9"" |
| register "type" = "UPC_TYPE_A" |
| register "group" = "ACPI_PLD_GROUP(9, 1)" |
| device ref usb2_port9 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB2 Type-A Port 10"" |
| register "type" = "UPC_TYPE_A" |
| register "group" = "ACPI_PLD_GROUP(10, 1)" |
| device ref usb2_port10 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB3 Type-A Port 1"" |
| register "type" = "UPC_TYPE_USB3_A" |
| register "group" = "ACPI_PLD_GROUP(1, 2)" |
| device ref usb3_port1 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB3 Type-A Port 2"" |
| register "type" = "UPC_TYPE_USB3_A" |
| register "group" = "ACPI_PLD_GROUP(2, 2)" |
| device ref usb3_port2 on end |
| end |
| end |
| end |
| end |
| device ref cnvi_wifi on |
| chip drivers/wifi/generic |
| register "wake" = "GPE0_PME_B0" |
| register "enable_cnvi_ddr_rfim" = "true" |
| device generic 0 on end |
| end |
| end |
| device ref i2c0 on |
| chip drivers/intel/mipi_camera |
| register "acpi_hid" = ""OVTIDB10"" |
| register "acpi_uid" = "0" |
| register "acpi_name" = ""CAM1"" |
| register "chip_name" = ""Ov 13b10 Camera"" |
| register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" |
| |
| register "ssdb.lanes_used" = "4" |
| register "num_freq_entries" = "1" |
| register "link_freq[0]" = "560000000" |
| register "remote_name" = ""IPU0"" |
| |
| register "has_power_resource" = "1" |
| #Controls |
| register "clk_panel.clks[0].clknum" = "0" |
| register "clk_panel.clks[0].freq" = "1" #19.2 Mhz |
| register "gpio_panel.gpio[0].gpio_num" = "GPP_A17" #power_enable |
| register "gpio_panel.gpio[1].gpio_num" = "GPP_H00" #reset |
| |
| #_ON |
| register "on_seq.ops_cnt" = "4" |
| register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" |
| register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 2)" |
| register "on_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 1)" |
| register "on_seq.ops[3]" = "SEQ_OPS_GPIO_ENABLE(1, 1)" |
| |
| #_OFF |
| register "off_seq.ops_cnt" = "3" |
| register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)" |
| register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" |
| register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" |
| |
| device i2c 36 on end |
| end |
| end |
| device ref i2c1 on |
| chip drivers/intel/mipi_camera |
| register "acpi_hid" = ""OVTIDB10"" |
| register "acpi_uid" = "0" |
| register "acpi_name" = ""CAM0"" |
| register "chip_name" = ""Ov 13b10 Camera"" |
| register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" |
| |
| register "ssdb.vcm_type" = "0x0C" |
| register "vcm_name" = ""VCM1"" |
| |
| register "ssdb.lanes_used" = "4" |
| register "num_freq_entries" = "1" |
| register "link_freq[0]" = "560000000" |
| register "remote_name" = ""IPU0"" |
| |
| register "has_power_resource" = "1" |
| #Controls |
| register "clk_panel.clks[0].clknum" = "2" |
| register "clk_panel.clks[0].freq" = "1" #19.2 Mhz |
| register "gpio_panel.gpio[0].gpio_num" = "GPP_C08" #power_enable |
| register "gpio_panel.gpio[1].gpio_num" = "GPP_V23" #reset |
| |
| #_ON |
| register "on_seq.ops_cnt" = "4" |
| register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" |
| register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 2)" |
| register "on_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 1)" |
| register "on_seq.ops[3]" = "SEQ_OPS_GPIO_ENABLE(1, 1)" |
| |
| #_OFF |
| register "off_seq.ops_cnt" = "3" |
| register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)" |
| register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" |
| register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" |
| |
| device i2c 36 on end |
| end |
| chip drivers/intel/mipi_camera |
| register "acpi_uid" = "3" |
| register "acpi_name" = ""VCM1"" |
| register "chip_name" = ""DW AF VCM"" |
| register "device_type" = "INTEL_ACPI_CAMERA_VCM" |
| |
| register "pr0" = ""\\_SB.PCI0.I2C1.CAM0.PRIC"" |
| register "vcm_compat" = ""dongwoon,dw9714"" |
| |
| device i2c 0C on end |
| end |
| chip drivers/intel/mipi_camera |
| register "acpi_uid" = "1" |
| register "acpi_name" = ""NVM1"" |
| register "chip_name" = ""BRCA016GWZ"" |
| register "device_type" = "INTEL_ACPI_CAMERA_NVM" |
| |
| register "pr0" = ""\\_SB.PCI0.I2C1.CAM0.PRIC"" |
| register "nvm_compat" = ""atmel,24c16"" |
| |
| register "nvm_size" = "0x800" |
| register "nvm_pagesize" = "0x01" |
| register "nvm_readonly" = "0x01" |
| register "nvm_width" = "0x08" |
| |
| device i2c 50 on end |
| end |
| end |
| device ref i2c2 on end |
| device ref i2c3 on |
| chip drivers/i2c/generic |
| register "hid" = ""10EC5682"" |
| register "name" = ""RT58"" |
| register "desc" = ""Headset Codec"" |
| register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_S05)" |
| register "probed" = "1" |
| # jd_src RT5668_JD1 = 1, RT5682_JD_NULL = 0 |
| register "property_count" = "1" |
| register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" |
| register "property_list[0].name" = ""realtek,jd-src"" |
| register "property_list[0].integer" = "1" |
| device i2c 1a on |
| probe AUDIO MTL_ALC1019_ALC5682I_I2S |
| probe AUDIO MTL_ALC5682I_MAX9857A_I2S |
| end |
| end |
| # Ref config #5 for Chrome, transducer card config 5A |
| #+-------------------+-------------------+ |
| #| Speaker Amp | Assignment | |
| #+-------------------+-------------------+ |
| #| SPK 0 | left | |
| #| SPK 1 | right | |
| #| SPK 2 | top left | |
| #| SPK 3 | top right | |
| #+-------------------+-------------------+ |
| chip drivers/i2c/generic |
| register "hid" = ""10EC1019"" |
| register "desc" = ""Realtek SPK AMP L"" |
| register "uid" = "0" |
| device i2c 28 on |
| probe AUDIO MTL_ALC1019_ALC5682I_I2S |
| end |
| end |
| chip drivers/i2c/generic |
| register "hid" = ""10EC1019"" |
| register "desc" = ""Realtek SPK AMP R"" |
| register "uid" = "1" |
| device i2c 29 on |
| probe AUDIO MTL_ALC1019_ALC5682I_I2S |
| end |
| end |
| chip drivers/i2c/generic |
| register "hid" = ""10EC1019"" |
| register "desc" = ""Realtek SPK AMP TL"" |
| register "uid" = "2" |
| device i2c 2a on |
| probe AUDIO MTL_ALC1019_ALC5682I_I2S |
| end |
| end |
| chip drivers/i2c/generic |
| register "hid" = ""10EC1019"" |
| register "desc" = ""Realtek SPK AMP TR"" |
| register "uid" = "3" |
| device i2c 2b on |
| probe AUDIO MTL_ALC1019_ALC5682I_I2S |
| end |
| end |
| end # I2C3 |
| device ref i2c4 on end |
| device ref i2c5 on end |
| device ref pmc_shared_sram on end |
| device ref uart0 on end |
| device ref gspi1 on end |
| device ref smbus on end |
| device ref hda on |
| chip drivers/intel/soundwire |
| device generic 0 on |
| chip drivers/soundwire/alc711 |
| # SoundWire Link 0 ID 1 |
| register "desc" = ""Headset Codec"" |
| device generic 0.1 on |
| probe AUDIO MTL_ALC711_SNDW |
| end |
| end |
| chip drivers/soundwire/alc5682 |
| # SoundWire Link 2 ID 1 |
| register "desc" = ""Headset Codec"" |
| device generic 2.1 on |
| probe AUDIO MTL_MAX98373_ALC5682_SNDW |
| end |
| end |
| chip drivers/soundwire/max98373 |
| # SoundWire Link 0 ID 3 |
| register "desc" = ""Left Speaker Amp"" |
| device generic 0.3 on |
| probe AUDIO MTL_MAX98373_ALC5682_SNDW |
| end |
| end |
| chip drivers/soundwire/max98373 |
| # SoundWire Link 0 ID 7 |
| register "desc" = ""Right Speaker Amp"" |
| device generic 0.7 on |
| probe AUDIO MTL_MAX98373_ALC5682_SNDW |
| end |
| end |
| end |
| end |
| chip drivers/generic/max98357a |
| register "hid" = ""MX98357A"" |
| register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_S04)" |
| register "sdmode_delay" = "5" |
| device generic 0 on |
| probe AUDIO MTL_ALC5682I_MAX9857A_I2S |
| end |
| end |
| end |
| end |
| end |