| /* SPDX-License-Identifier: GPL-2.0-or-later */ |
| |
| /* |
| * The sole purpose of this driver is to avoid BAR to be changed during |
| * resource allocation. Since configuration space is just 32 bytes it |
| * shouldn't cause any fragmentation. |
| */ |
| |
| #include <console/console.h> |
| #include <intelblocks/uart.h> |
| #include <soc/gpio.h> |
| #include <soc/pci_devs.h> |
| |
| /* UART pad configuration. Support RXD and TXD for now. */ |
| const struct uart_gpio_pad_config uart_gpio_pads[] = { |
| #if CONFIG(SOC_INTEL_GEMINILAKE) |
| { |
| .console_index = 0, |
| .gpios = { |
| PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_60, NATIVE, DEEP, NF1, |
| HIZCRx1, DISPUPD), /* LPSS_UART0_RXD */ |
| PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_61, NATIVE, DEEP, NF1, |
| HIZCRx1, DISPUPD), /* LPSS_UART0_TXD */ |
| |
| }, |
| }, |
| { |
| .console_index = 2, |
| .gpios = { |
| PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_64, NATIVE, DEEP, NF1, |
| HIZCRx1, DISPUPD), /* LPSS_UART2_RXD */ |
| PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_65, NATIVE, DEEP, NF1, |
| HIZCRx1, DISPUPD), /* LPSS_UART2_TXD */ |
| }, |
| }, |
| #else |
| { |
| .console_index = 0, |
| .gpios = { |
| PAD_CFG_NF(GPIO_38, NATIVE, DEEP, NF1), /* UART0 RX */ |
| PAD_CFG_NF(GPIO_39, NATIVE, DEEP, NF1), /* UART0 TX */ |
| }, |
| }, |
| { |
| .console_index = 1, |
| .gpios = { |
| PAD_CFG_NF(GPIO_42, NATIVE, DEEP, NF1), /* UART1 RX */ |
| PAD_CFG_NF(GPIO_43, NATIVE, DEEP, NF1), /* UART1 TX */ |
| }, |
| }, |
| { |
| .console_index = 2, |
| .gpios = { |
| PAD_CFG_NF(GPIO_46, NATIVE, DEEP, NF1), /* UART2 RX */ |
| PAD_CFG_NF(GPIO_47, NATIVE, DEEP, NF1), /* UART2 TX */ |
| }, |
| }, |
| #endif |
| }; |
| |
| const int uart_max_index = ARRAY_SIZE(uart_gpio_pads); |
| |
| DEVTREE_CONST struct device *soc_uart_console_to_device(int uart_console) |
| { |
| /* |
| * if index is valid, this function will return corresponding structure |
| * for uart console else will return NULL. |
| */ |
| switch (uart_console) { |
| case 0: |
| return pcidev_path_on_root(PCH_DEVFN_UART0); |
| case 1: |
| return pcidev_path_on_root(PCH_DEVFN_UART1); |
| case 2: |
| return pcidev_path_on_root(PCH_DEVFN_UART2); |
| case 3: |
| return pcidev_path_on_root(PCH_DEVFN_UART3); |
| default: |
| printk(BIOS_ERR, "Invalid UART console index\n"); |
| return NULL; |
| } |
| } |