| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <bootblock_common.h> |
| #include <northbridge/intel/sandybridge/raminit_native.h> |
| #include <southbridge/intel/bd82x6x/pch.h> |
| #include <superio/ite/common/ite.h> |
| #include <superio/ite/it8728f/it8728f.h> |
| |
| #define SUPERIO_BASE 0x2e |
| #define SIO_GPIO PNP_DEV(SUPERIO_BASE, IT8728F_GPIO) |
| #define SERIAL_DEV PNP_DEV(SUPERIO_BASE, 0x01) |
| |
| void bootblock_mainboard_early_init(void) |
| { |
| /* Initialize SuperIO */ |
| ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); |
| |
| ite_reg_write(SIO_GPIO, 0xEF, 0x7E); // magic SIO disable reboot |
| |
| /* FIXME: These values could be configured in ramstage */ |
| ite_reg_write(SIO_GPIO, 0x25, 0x40); // gpio pin function -> gp16 |
| ite_reg_write(SIO_GPIO, 0x27, 0x10); // gpio pin function -> gp34 |
| ite_reg_write(SIO_GPIO, 0x2c, 0x80); // smbus isolation on parallel port |
| ite_reg_write(SIO_GPIO, 0x62, 0x0a); // simple iobase 0xa00 |
| ite_reg_write(SIO_GPIO, 0x72, 0x20); // watchdog timeout clear! |
| ite_reg_write(SIO_GPIO, 0x73, 0x00); // watchdog timeout clear! |
| ite_reg_write(SIO_GPIO, 0xcb, 0x00); // simple io set4 direction -> in |
| ite_reg_write(SIO_GPIO, 0xe9, 0x27); // bus select disable |
| ite_reg_write(SIO_GPIO, 0xf0, 0x10); // ? |
| ite_reg_write(SIO_GPIO, 0xf1, 0x42); // ? |
| ite_reg_write(SIO_GPIO, 0xf6, 0x1c); // hwmon alert beep -> gp36(pin12) |
| |
| /* EC SIO settings */ |
| ite_reg_write(IT8728F_EC, 0xf1, 0xc0); |
| ite_reg_write(IT8728F_EC, 0xf6, 0xf0); |
| ite_reg_write(IT8728F_EC, 0xf9, 0x48); |
| ite_reg_write(IT8728F_EC, 0x60, 0x0a); |
| ite_reg_write(IT8728F_EC, 0x61, 0x30); |
| ite_reg_write(IT8728F_EC, 0x62, 0x0a); |
| ite_reg_write(IT8728F_EC, 0x63, 0x20); |
| ite_reg_write(IT8728F_EC, 0x30, 0x01); |
| } |
| |
| const struct southbridge_usb_port mainboard_usb_ports[] = { |
| { 1, 5, 0 }, |
| { 1, 5, 0 }, |
| { 1, 5, 1 }, |
| { 1, 5, 1 }, |
| { 1, 5, 2 }, |
| { 1, 5, 2 }, |
| { 1, 5, 3 }, |
| { 1, 5, 3 }, |
| { 1, 5, 4 }, |
| { 1, 5, 4 }, |
| { 1, 5, 6 }, |
| { 1, 5, 5 }, |
| { 1, 5, 5 }, |
| { 1, 5, 6 }, |
| }; |
| |
| /* FIXME: The GA-B75M-D3V only has two DIMM slots! */ |
| void mainboard_get_spd(spd_raw_data *spd, bool id_only) |
| { |
| read_spd(&spd[0], 0x50, id_only); |
| read_spd(&spd[1], 0x51, id_only); |
| read_spd(&spd[2], 0x52, id_only); |
| read_spd(&spd[3], 0x53, id_only); |
| } |