src/mainboard/olpc/rev_a/Config.lb

## CONFIG_XIP_ROM_SIZE must be a power of 2.
default CONFIG_XIP_ROM_SIZE = 64 * 1024
include /config/nofailovercalculation.lb

##
## Set all of the defaults for an x86 architecture
##

arch i386 end

##
## Build the objects we have code for in this directory.
##

driver mainboard.o

if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
#object reset.o

##
## Romcc output
##
makerule ./failover.E
	depends "$(CONFIG_MAINBOARD)/failover.c ../romcc" 
	action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@"
end

makerule ./failover.inc
	depends "$(CONFIG_MAINBOARD)/failover.c ../romcc"
	action "../romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@"
end

makerule ./auto.E 
	depends	"$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc" 
	action	"../romcc -E -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
end
makerule ./auto.inc 
	depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
	action	"../romcc    -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
end

##
## Build our 16 bit and 32 bit coreboot entry code
##
mainboardinit cpu/x86/16bit/entry16.inc
mainboardinit cpu/x86/32bit/entry32.inc
ldscript /cpu/x86/16bit/entry16.lds
ldscript /cpu/x86/32bit/entry32.lds

##
## Build our reset vector (This is where coreboot is entered)
##
if CONFIG_USE_FALLBACK_IMAGE 
	mainboardinit cpu/x86/16bit/reset16.inc 
	ldscript /cpu/x86/16bit/reset16.lds 
else
	mainboardinit cpu/x86/32bit/reset32.inc 
	ldscript /cpu/x86/32bit/reset32.lds 
end

### Should this be in the northbridge code?
mainboardinit arch/i386/lib/cpu_reset.inc

##
## Include an id string (For safe flashing)
##
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds

###
### This is the early phase of coreboot startup 
### Things are delicate and we test to see if we should
### failover to another image.
###
if CONFIG_USE_FALLBACK_IMAGE
	ldscript /arch/i386/lib/failover.lds 
	mainboardinit ./failover.inc
end

###
### O.k. We aren't just an intermediary anymore!
###

##
## Setup RAM
##
mainboardinit cpu/x86/fpu/enable_fpu.inc
mainboardinit ./auto.inc

##
## Include the secondary Configuration files 
##
dir /pc80
config chip.h

chip northbridge/amd/gx2
	register "irqmap" = "0xaa5b"
	register "setupflash" = "0"
	device apic_cluster 0 on
		chip cpu/amd/model_gx2
			device apic 0 on end
		end
	end
  	device pci_domain 0 on 
    		device pci 1.0 on end
		device pci 1.1 on end
      		chip southbridge/amd/cs5536
		# 0x51400025 (IRQ Mapper LPC Mask)= 0x00001002
		# IRQ 12 and 1 unmasked,  Keyboard and Mouse IRQs. OK
		# 0x5140004E (LPC Serial IRQ Control) = 0xEFFD0080.
		# Frame Pulse Width = 4clocks
		# IRQ Data Frames = 17Frames
		# SIRQ Mode = continous , It would be better if the EC could operate in
		# Active(Quiet) mode. Save power....
		# SIRQ Enable = Enabled
		# Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK 
			#register "lpc_irq" = "0x00001002"
			#register "lpc_serirq_enable" = "0xEFFD0080"
			#register "enable_gpio0_inta" = "1"
			#register "enable_ide_nand_flash" = "1"
			#register "enable_uarta" = "1"
			#register "enable_USBP4_host" = "1"
			#register "audio_irq" = "5"
			#register "usbf4_irq" = "10"
			#register "usbf5_irq" = "10"
			#register "usbf6_irq" = "0"
			#register "usbf7_irq" = "0"
        		device pci d.0 on end	# Realtek 8139 LAN
        		device pci f.0 on end	# ISA Bridge
        		device pci f.2 on end	# IDE Controller
        		device pci f.3 on end 	# Audio
        		device pci f.4 on end	# OHCI
			device pci f.5 on end	# EHCI
			register "unwanted_vpci[0]" = "0x80007E00"	# USB/UDC
			register "unwanted_vpci[1]" = "0x80007F00"	# USB/OTG
			register "unwanted_vpci[2]" = "0"	# End of list has a zero
      		end
    	end
end