| ## |
| ## This file is part of the coreboot project. |
| ## |
| ## Copyright (C) 2008 Uwe Hermann <uwe@hermann-uwe.de> |
| ## |
| ## This program is free software; you can redistribute it and/or modify |
| ## it under the terms of the GNU General Public License as published by |
| ## the Free Software Foundation; either version 2 of the License, or |
| ## (at your option) any later version. |
| ## |
| ## This program is distributed in the hope that it will be useful, |
| ## but WITHOUT ANY WARRANTY; without even the implied warranty of |
| ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| ## GNU General Public License for more details. |
| ## |
| ## You should have received a copy of the GNU General Public License |
| ## along with this program; if not, write to the Free Software |
| ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| ## |
| |
| ## CONFIG_XIP_ROM_SIZE must be a power of 2. |
| default CONFIG_XIP_ROM_SIZE = 64 * 1024 |
| include /config/nofailovercalculation.lb |
| |
| arch i386 end |
| driver mainboard.o |
| if CONFIG_GENERATE_PIRQ_TABLE |
| object irq_tables.o |
| end |
| makerule ./failover.E |
| depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc" |
| action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@" |
| end |
| makerule ./failover.inc |
| depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc" |
| action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@" |
| end |
| makerule ./auto.E |
| # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc" |
| depends "$(CONFIG_MAINBOARD)/auto.c ../romcc" |
| action "../romcc -E -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@" |
| end |
| makerule ./auto.inc |
| # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc" |
| depends "$(CONFIG_MAINBOARD)/auto.c ../romcc" |
| action "../romcc -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@" |
| end |
| mainboardinit cpu/x86/16bit/entry16.inc |
| mainboardinit cpu/x86/32bit/entry32.inc |
| ldscript /cpu/x86/16bit/entry16.lds |
| ldscript /cpu/x86/32bit/entry32.lds |
| if CONFIG_USE_FALLBACK_IMAGE |
| mainboardinit cpu/x86/16bit/reset16.inc |
| ldscript /cpu/x86/16bit/reset16.lds |
| else |
| mainboardinit cpu/x86/32bit/reset32.inc |
| ldscript /cpu/x86/32bit/reset32.lds |
| end |
| mainboardinit arch/i386/lib/cpu_reset.inc |
| mainboardinit arch/i386/lib/id.inc |
| ldscript /arch/i386/lib/id.lds |
| if CONFIG_USE_FALLBACK_IMAGE |
| ldscript /arch/i386/lib/failover.lds |
| mainboardinit ./failover.inc |
| end |
| mainboardinit cpu/x86/fpu/enable_fpu.inc |
| mainboardinit cpu/amd/model_gx1/cpu_setup.inc |
| mainboardinit cpu/amd/model_gx1/gx_setup.inc |
| mainboardinit ./auto.inc |
| |
| dir /pc80 |
| config chip.h |
| |
| chip northbridge/amd/gx1 # Northbridge |
| device pci_domain 0 on # PCI domain |
| device pci 0.0 on end # Host bridge |
| chip southbridge/amd/cs5530 # Southbridge |
| device pci 0f.0 on end # Ethernet |
| device pci 12.0 on # ISA bridge |
| chip superio/nsc/pc87351 # Super I/O |
| device pnp 2e.0 off # Floppy |
| io 0x60 = 0x3f0 |
| irq 0x70 = 6 |
| drq 0x74 = 2 |
| end |
| device pnp 2e.1 on # Parallel port |
| io 0x60 = 0x378 |
| irq 0x70 = 7 |
| end |
| device pnp 2e.2 on # COM2 |
| io 0x60 = 0x2f8 |
| irq 0x70 = 3 |
| end |
| device pnp 2e.e on # COM1 |
| io 0x60 = 0x3f8 |
| irq 0x70 = 4 |
| end |
| device pnp 2e.4 on # System wake-up control (SWC) |
| irq 0x60 = 0x500 |
| end |
| device pnp 2e.5 on # PS/2 mouse |
| irq 0x70 = 12 |
| end |
| device pnp 2e.6 on # PS/2 keyboard |
| io 0x60 = 0x60 |
| io 0x62 = 0x64 |
| irq 0x70 = 1 |
| end |
| device pnp 2e.7 on # GPIO |
| irq 0x60 = 0x800 |
| end |
| device pnp 2e.8 on # Fan speed control |
| irq 0x60 = 0x900 |
| end |
| end |
| end |
| device pci 12.1 off end # SMI |
| device pci 12.2 on end # IDE |
| device pci 12.3 on end # Audio |
| device pci 12.4 on end # VGA |
| device pci 13.0 on end # USB |
| register "ide0_enable" = "1" |
| register "ide1_enable" = "0" # No connector on this board |
| end |
| end |
| chip cpu/amd/model_gx1 # CPU |
| end |
| end |