| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2015 Intel Corp. |
| * Copyright (C) 2017 Siemens AG |
| * (Written by Alexandru Gagniuc <alexandrux.gagniuc@intel.com> for Intel Corp.) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #ifndef _SOC_APOLLOLAKE_CHIP_H_ |
| #define _SOC_APOLLOLAKE_CHIP_H_ |
| |
| #include <commonlib/helpers.h> |
| #include <soc/gpe.h> |
| #include <soc/gpio.h> |
| #include <intelblocks/lpc_lib.h> |
| #include <device/i2c_simple.h> |
| #include <drivers/i2c/designware/dw_i2c.h> |
| #include <soc/pm.h> |
| #include <soc/usb.h> |
| |
| #define CLKREQ_DISABLED 0xf |
| #define APOLLOLAKE_I2C_DEV_MAX 8 |
| |
| enum pnp_settings { |
| PNP_PERF, |
| PNP_POWER, |
| PNP_PERF_POWER, |
| }; |
| |
| struct soc_intel_apollolake_config { |
| /* |
| * Mapping from PCIe root port to CLKREQ input on the SOC. The SOC has |
| * four CLKREQ inputs, but six root ports. Root ports without an |
| * associated CLKREQ signal must be marked with "CLKREQ_DISABLED" |
| */ |
| uint8_t pcie_rp0_clkreq_pin; |
| uint8_t pcie_rp1_clkreq_pin; |
| uint8_t pcie_rp2_clkreq_pin; |
| uint8_t pcie_rp3_clkreq_pin; |
| uint8_t pcie_rp4_clkreq_pin; |
| uint8_t pcie_rp5_clkreq_pin; |
| |
| /* [14:8] DDR mode Number of dealy elements.Each = 125pSec. |
| * [6:0] SDR mode Number of dealy elements.Each = 125pSec. |
| */ |
| uint32_t emmc_tx_cmd_cntl; |
| |
| /* [14:8] HS400 mode Number of dealy elements.Each = 125pSec. |
| * [6:0] SDR104/HS200 mode Number of dealy elements.Each = 125pSec. |
| */ |
| uint32_t emmc_tx_data_cntl1; |
| |
| /* [30:24] SDR50 mode Number of dealy elements.Each = 125pSec. |
| * [22:16] DDR50 mode Number of dealy elements.Each = 125pSec. |
| * [14:8] SDR25/HS50 mode Number of dealy elements.Each = 125pSec. |
| * [6:0] SDR12/Compatibility mode Number of dealy elements. |
| * Each = 125pSec. |
| */ |
| uint32_t emmc_tx_data_cntl2; |
| |
| /* [30:24] SDR50 mode Number of dealy elements.Each = 125pSec. |
| * [22:16] DDR50 mode Number of dealy elements.Each = 125pSec. |
| * [14:8] SDR25/HS50 mode Number of dealy elements.Each = 125pSec. |
| * [6:0] SDR12/Compatibility mode Number of dealy elements. |
| * Each = 125pSec. |
| */ |
| uint32_t emmc_rx_cmd_data_cntl1; |
| |
| /* [14:8] HS400 mode 1 Number of dealy elements.Each = 125pSec. |
| * [6:0] HS400 mode 2 Number of dealy elements.Each = 125pSec. |
| */ |
| uint32_t emmc_rx_strobe_cntl; |
| |
| /* [13:8] Auto Tuning mode Number of dealy elements.Each = 125pSec. |
| * [6:0] SDR104/HS200 Number of dealy elements.Each = 125pSec. |
| */ |
| uint32_t emmc_rx_cmd_data_cntl2; |
| |
| /* Specifies on which IRQ the SCI will internally appear. */ |
| uint8_t sci_irq; |
| |
| /* Configure serial IRQ (SERIRQ) line. */ |
| enum serirq_mode serirq_mode; |
| |
| /* I2C bus configuration */ |
| struct dw_i2c_bus_config i2c[APOLLOLAKE_I2C_DEV_MAX]; |
| |
| uint8_t gpe0_dw1; /* GPE0_63_32 STS/EN */ |
| uint8_t gpe0_dw2; /* GPE0_95_64 STS/EN */ |
| uint8_t gpe0_dw3; /* GPE0_127_96 STS/EN */ |
| |
| /* Configure LPSS S0ix Enable */ |
| uint8_t lpss_s0ix_enable; |
| |
| /* Enable DPTF support */ |
| int dptf_enable; |
| |
| /* PL1 override value in mW for APL */ |
| uint16_t tdp_pl1_override_mw; |
| /* PL2 override value in mW for APL */ |
| uint16_t tdp_pl2_override_mw; |
| |
| /* Configure Audio clk gate and power gate |
| * IOSF-SB port ID 92 offset 0x530 [5] and [3] |
| */ |
| uint8_t hdaudio_clk_gate_enable; |
| uint8_t hdaudio_pwr_gate_enable; |
| uint8_t hdaudio_bios_config_lockdown; |
| |
| /* SLP S3 minimum assertion width. */ |
| int slp_s3_assertion_width_usecs; |
| |
| /* GPIO pin for PERST_0 */ |
| uint16_t prt0_gpio; |
| |
| /* USB2 eye diagram settings per port */ |
| struct usb2_eye_per_port usb2eye[APOLLOLAKE_USB2_PORT_MAX]; |
| |
| /* GPIO SD card detect pin */ |
| unsigned int sdcard_cd_gpio; |
| |
| /* PRMRR size setting with three options |
| * 0x02000000 - 32MiB |
| * 0x04000000 - 64MiB |
| * 0x08000000 - 128MiB */ |
| uint32_t PrmrrSize; |
| |
| /* Enable SGX feature. |
| * Enabling SGX feature is 2 step process, |
| * (1) set sgx_enable = 1 |
| * (2) set PrmrrSize to supported size */ |
| uint8_t sgx_enable; |
| |
| /* Select PNP Settings. |
| * (0) Performance, |
| * (1) Power |
| * (2) Power & Performance */ |
| enum pnp_settings pnp_settings; |
| }; |
| |
| typedef struct soc_intel_apollolake_config config_t; |
| |
| #endif /* _SOC_APOLLOLAKE_CHIP_H_ */ |