ic2/designware: Move Intel i2c logic to shared driver
BUG=b:70232394
BRANCH=none
TEST=emerge-reef coreboot
emerge-glados
Change-Id: Idb453a4d2411163e6b4a8422310bf272eac5d379
Signed-off-by: Chris Ching <chingcodes@chromium.org>
Reviewed-on: https://review.coreboot.org/22822
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
diff --git a/src/soc/intel/common/block/i2c/Kconfig b/src/soc/intel/common/block/i2c/Kconfig
index 0e68dac..e70796a 100644
--- a/src/soc/intel/common/block/i2c/Kconfig
+++ b/src/soc/intel/common/block/i2c/Kconfig
@@ -1,5 +1,6 @@
config SOC_INTEL_COMMON_BLOCK_I2C
bool
+ select DRIVERS_I2C_DESIGNWARE
help
Intel Processor Common I2C support
diff --git a/src/soc/intel/common/block/i2c/Makefile.inc b/src/soc/intel/common/block/i2c/Makefile.inc
index 24755c4..58feb5f 100644
--- a/src/soc/intel/common/block/i2c/Makefile.inc
+++ b/src/soc/intel/common/block/i2c/Makefile.inc
@@ -1,11 +1,8 @@
-bootblock-$(CONFIG_SOC_INTEL_COMMON_BLOCK_I2C) += lpss_i2c.c
-bootblock-$(CONFIG_SOC_INTEL_COMMON_BLOCK_I2C) += i2c_early.c
+ifeq ($(CONFIG_SOC_INTEL_COMMON_BLOCK_I2C),y)
-romstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_I2C) += lpss_i2c.c
-romstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_I2C) += i2c_early.c
+bootblock-y += i2c_early.c
+romstage-y += i2c_early.c
+verstage-y += i2c_early.c
+ramstage-y += i2c.c
-verstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_I2C) += lpss_i2c.c
-verstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_I2C) += i2c_early.c
-
-ramstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_I2C) += lpss_i2c.c
-ramstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_I2C) += i2c.c
+endif
diff --git a/src/soc/intel/common/block/i2c/i2c.c b/src/soc/intel/common/block/i2c/i2c.c
index 3bb7d11..7200771 100644
--- a/src/soc/intel/common/block/i2c/i2c.c
+++ b/src/soc/intel/common/block/i2c/i2c.c
@@ -18,16 +18,9 @@
#include <device/pci.h>
#include <device/pci_def.h>
#include <device/pci_ids.h>
-#include <intelblocks/lpss_i2c.h>
-#include "lpss_i2c.h"
+#include <drivers/i2c/designware/dw_i2c.h>
-static int lpss_i2c_dev_to_bus(struct device *dev)
-{
- pci_devfn_t devfn = dev->path.pci.devfn;
- return i2c_soc_devfn_to_bus(devfn);
-}
-
-uintptr_t lpss_i2c_base_address(unsigned int bus)
+uintptr_t dw_i2c_base_address(unsigned int bus)
{
int devfn;
struct device *dev;
@@ -52,6 +45,12 @@
return (uintptr_t)NULL;
}
+static int lpss_i2c_dev_to_bus(struct device *dev)
+{
+ pci_devfn_t devfn = dev->path.pci.devfn;
+ return i2c_soc_devfn_to_bus(devfn);
+}
+
/*
* Write ACPI object to describe speed configuration.
*
@@ -63,7 +62,7 @@
* HSCN: I2C_SPEED_HIGH
*/
static void lpss_i2c_acpi_write_speed_config(
- const struct lpss_i2c_speed_config *config)
+ const struct dw_i2c_speed_config *config)
{
if (!config)
return;
@@ -93,7 +92,7 @@
*/
static void lpss_i2c_dev_init(struct device *dev)
{
- const struct lpss_i2c_bus_config *config;
+ const struct dw_i2c_bus_config *config;
int bus = lpss_i2c_dev_to_bus(dev);
if (bus < 0)
@@ -104,7 +103,7 @@
if (!config)
return;
- lpss_i2c_init(bus, config);
+ dw_i2c_init(bus, config);
}
/*
@@ -113,10 +112,10 @@
*/
static void lpss_i2c_acpi_fill_ssdt(struct device *dev)
{
- const struct lpss_i2c_bus_config *bcfg;
- struct lpss_i2c_regs *regs;
- struct lpss_i2c_speed_config sgen;
- enum i2c_speed speeds[LPSS_I2C_SPEED_CONFIG_COUNT] = {
+ const struct dw_i2c_bus_config *bcfg;
+ uintptr_t dw_i2c_addr;
+ struct dw_i2c_speed_config sgen;
+ enum i2c_speed speeds[DW_I2C_SPEED_CONFIG_COUNT] = {
I2C_SPEED_STANDARD,
I2C_SPEED_FAST,
I2C_SPEED_FAST_PLUS,
@@ -137,16 +136,17 @@
if (!bcfg)
return;
- regs = (struct lpss_i2c_regs *)lpss_i2c_base_address(bus);
- if (!regs)
+ dw_i2c_addr = dw_i2c_base_address(bus);
+ if (!dw_i2c_addr)
return;
acpigen_write_scope(acpi_device_path(dev));
/* Report timing values for the OS driver */
- for (i = 0; i < LPSS_I2C_SPEED_CONFIG_COUNT; i++) {
+ for (i = 0; i < DW_I2C_SPEED_CONFIG_COUNT; i++) {
/* Generate speed config. */
- if (lpss_i2c_gen_speed_config(regs, speeds[i], bcfg, &sgen) < 0)
+ if (dw_i2c_gen_speed_config(dw_i2c_addr, speeds[i], bcfg,
+ &sgen) < 0)
continue;
/* Generate ACPI based on selected speed config */
@@ -159,7 +159,7 @@
static int lpss_i2c_dev_transfer(struct device *dev,
const struct i2c_msg *msg, size_t count)
{
- return lpss_i2c_transfer(lpss_i2c_dev_to_bus(dev), msg, count);
+ return dw_i2c_transfer(lpss_i2c_dev_to_bus(dev), msg, count);
}
static const struct i2c_bus_operations i2c_bus_ops = {
diff --git a/src/soc/intel/common/block/i2c/i2c_early.c b/src/soc/intel/common/block/i2c/i2c_early.c
index 74fc994..f10147e 100644
--- a/src/soc/intel/common/block/i2c/i2c_early.c
+++ b/src/soc/intel/common/block/i2c/i2c_early.c
@@ -20,13 +20,12 @@
#include <device/i2c_simple.h>
#include <device/pci.h>
#include <device/pci_def.h>
+#include <drivers/i2c/designware/dw_i2c.h>
#include <intelblocks/lpss.h>
-#include <intelblocks/lpss_i2c.h>
-#include "lpss_i2c.h"
static int lpss_i2c_early_init_bus(unsigned int bus)
{
- const struct lpss_i2c_bus_config *config;
+ const struct dw_i2c_bus_config *config;
const struct device *tree_dev;
pci_devfn_t dev;
int devfn;
@@ -64,7 +63,7 @@
lpss_reset_release(base);
/* Initialize the controller */
- if (lpss_i2c_init(bus, config) < 0) {
+ if (dw_i2c_init(bus, config) < 0) {
printk(BIOS_ERR, "I2C%u failed to initialize\n", bus);
return -1;
}
@@ -72,7 +71,7 @@
return 0;
}
-uintptr_t lpss_i2c_base_address(unsigned int bus)
+uintptr_t dw_i2c_base_address(unsigned int bus)
{
int devfn;
pci_devfn_t dev;
diff --git a/src/soc/intel/common/block/i2c/lpss_i2c.c b/src/soc/intel/common/block/i2c/lpss_i2c.c
deleted file mode 100644
index 9ae7831..0000000
--- a/src/soc/intel/common/block/i2c/lpss_i2c.c
+++ /dev/null
@@ -1,673 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright 2009 Vipin Kumar, ST Microelectronics
- * Copyright 2016 Google Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <arch/acpigen.h>
-#include <arch/io.h>
-#include <console/console.h>
-#include <device/device.h>
-#include <device/i2c_simple.h>
-#include <device/pci.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <intelblocks/lpss_i2c.h>
-#include <string.h>
-#include <timer.h>
-#include "lpss_i2c.h"
-
-/* Use a ~10ms timeout for various operations */
-#define LPSS_I2C_TIMEOUT_US 10000
-
-/* High and low times in different speed modes (in ns) */
-enum {
- /* SDA Hold Time */
- DEFAULT_SDA_HOLD_TIME = 300,
- /* Standard Speed */
- MIN_SS_SCL_HIGHTIME = 4000,
- MIN_SS_SCL_LOWTIME = 4700,
- /* Fast Speed */
- MIN_FS_SCL_HIGHTIME = 600,
- MIN_FS_SCL_LOWTIME = 1300,
- /* Fast Plus Speed */
- MIN_FP_SCL_HIGHTIME = 260,
- MIN_FP_SCL_LOWTIME = 500,
- /* High Speed */
- MIN_HS_SCL_HIGHTIME = 60,
- MIN_HS_SCL_LOWTIME = 160,
-};
-
-/* Frequency represented as ticks per ns. Can also be used to calculate
- * the number of ticks to meet a time target or the period. */
-struct freq {
- uint32_t ticks;
- uint32_t ns;
-};
-
-/* Control register definitions */
-enum {
- CONTROL_MASTER_MODE = (1 << 0),
- CONTROL_SPEED_SS = (1 << 1),
- CONTROL_SPEED_FS = (1 << 2),
- CONTROL_SPEED_HS = (3 << 1),
- CONTROL_SPEED_MASK = (3 << 1),
- CONTROL_10BIT_SLAVE = (1 << 3),
- CONTROL_10BIT_MASTER = (1 << 4),
- CONTROL_RESTART_ENABLE = (1 << 5),
- CONTROL_SLAVE_DISABLE = (1 << 6),
-};
-
-/* Command/Data register definitions */
-enum {
- CMD_DATA_CMD = (1 << 8),
- CMD_DATA_STOP = (1 << 9),
-};
-
-/* Status register definitions */
-enum {
- STATUS_ACTIVITY = (1 << 0),
- STATUS_TX_FIFO_NOT_FULL = (1 << 1),
- STATUS_TX_FIFO_EMPTY = (1 << 2),
- STATUS_RX_FIFO_NOT_EMPTY = (1 << 3),
- STATUS_RX_FIFO_FULL = (1 << 4),
- STATUS_MASTER_ACTIVITY = (1 << 5),
- STATUS_SLAVE_ACTIVITY = (1 << 6),
-};
-
-/* Enable register definitions */
-enum {
- ENABLE_CONTROLLER = (1 << 0),
-};
-
-/* Interrupt status register definitions */
-enum {
- INTR_STAT_RX_UNDER = (1 << 0),
- INTR_STAT_RX_OVER = (1 << 1),
- INTR_STAT_RX_FULL = (1 << 2),
- INTR_STAT_TX_OVER = (1 << 3),
- INTR_STAT_TX_EMPTY = (1 << 4),
- INTR_STAT_RD_REQ = (1 << 5),
- INTR_STAT_TX_ABORT = (1 << 6),
- INTR_STAT_RX_DONE = (1 << 7),
- INTR_STAT_ACTIVITY = (1 << 8),
- INTR_STAT_STOP_DET = (1 << 9),
- INTR_STAT_START_DET = (1 << 10),
- INTR_STAT_GEN_CALL = (1 << 11),
-};
-
-static const struct i2c_descriptor {
- enum i2c_speed speed;
- struct freq freq;
- int min_thigh_ns;
- int min_tlow_ns;
-} speed_descriptors[] = {
- {
- .speed = I2C_SPEED_STANDARD,
- .freq = {
- .ticks = 100,
- .ns = 1000*1000,
- },
- .min_thigh_ns = MIN_SS_SCL_HIGHTIME,
- .min_tlow_ns = MIN_SS_SCL_LOWTIME,
- },
- {
- .speed = I2C_SPEED_FAST,
- .freq = {
- .ticks = 400,
- .ns = 1000*1000,
- },
- .min_thigh_ns = MIN_FS_SCL_HIGHTIME,
- .min_tlow_ns = MIN_FS_SCL_LOWTIME,
- },
- {
- .speed = I2C_SPEED_FAST_PLUS,
- .freq = {
- .ticks = 1,
- .ns = 1000,
- },
- .min_thigh_ns = MIN_FP_SCL_HIGHTIME,
- .min_tlow_ns = MIN_FP_SCL_LOWTIME,
- },
- {
- /* 100pF max capacitance */
- .speed = I2C_SPEED_HIGH,
- .freq = {
- .ticks = 3400,
- .ns = 1000*1000,
- },
- .min_thigh_ns = MIN_HS_SCL_HIGHTIME,
- .min_tlow_ns = MIN_HS_SCL_LOWTIME,
- },
-};
-
-static const struct soc_clock {
- int clk_speed_mhz;
- struct freq freq;
-} soc_clocks[] = {
- {
- .clk_speed_mhz = 120,
- .freq = {
- .ticks = 120,
- .ns = 1000,
- },
- },
- {
- .clk_speed_mhz = 133,
- .freq = {
- .ticks = 400,
- .ns = 3000,
- },
- },
-};
-
-static const struct i2c_descriptor *get_bus_descriptor(enum i2c_speed speed)
-{
- size_t i;
-
- for (i = 0; i < ARRAY_SIZE(speed_descriptors); i++)
- if (speed == speed_descriptors[i].speed)
- return &speed_descriptors[i];
-
- return NULL;
-}
-
-static const struct soc_clock *get_soc_descriptor(int ic_clk)
-{
- size_t i;
-
- for (i = 0; i < ARRAY_SIZE(soc_clocks); i++)
- if (ic_clk == soc_clocks[i].clk_speed_mhz)
- return &soc_clocks[i];
-
- return NULL;
-}
-
-static int counts_from_time(const struct freq *f, int ns)
-{
- return DIV_ROUND_UP(f->ticks * ns, f->ns);
-}
-
-static int counts_from_freq(const struct freq *fast, const struct freq *slow)
-{
- return DIV_ROUND_UP(fast->ticks * slow->ns, fast->ns * slow->ticks);
-}
-
-/* Enable this I2C controller */
-static void lpss_i2c_enable(struct lpss_i2c_regs *regs)
-{
- uint32_t enable = read32(®s->enable);
-
- if (!(enable & ENABLE_CONTROLLER))
- write32(®s->enable, enable | ENABLE_CONTROLLER);
-}
-
-/* Disable this I2C controller */
-static int lpss_i2c_disable(struct lpss_i2c_regs *regs)
-{
- uint32_t enable = read32(®s->enable);
-
- if (enable & ENABLE_CONTROLLER) {
- struct stopwatch sw;
-
- write32(®s->enable, enable & ~ENABLE_CONTROLLER);
-
- /* Wait for enable bit to clear */
- stopwatch_init_usecs_expire(&sw, LPSS_I2C_TIMEOUT_US);
- while (read32(®s->enable_status) & ENABLE_CONTROLLER)
- if (stopwatch_expired(&sw))
- return -1;
- }
-
- return 0;
-}
-
-/* Wait for this I2C controller to go idle for transmit */
-static int lpss_i2c_wait_for_bus_idle(struct lpss_i2c_regs *regs)
-{
- struct stopwatch sw;
-
- /* Start timeout for up to 16 bytes in FIFO */
- stopwatch_init_usecs_expire(&sw, 16 * LPSS_I2C_TIMEOUT_US);
-
- while (!stopwatch_expired(&sw)) {
- uint32_t status = read32(®s->status);
-
- /* Check for master activity and keep waiting */
- if (status & STATUS_MASTER_ACTIVITY)
- continue;
-
- /* Check for TX FIFO empty to indicate TX idle */
- if (status & STATUS_TX_FIFO_EMPTY)
- return 0;
- }
-
- /* Timed out while waiting for bus to go idle */
- return -1;
-}
-
-/* Transfer one byte of one segment, sending stop bit if requested */
-static int lpss_i2c_transfer_byte(struct lpss_i2c_regs *regs,
- const struct i2c_msg *segment,
- size_t byte, int send_stop)
-{
- struct stopwatch sw;
- uint32_t cmd = CMD_DATA_CMD; /* Read op */
-
- stopwatch_init_usecs_expire(&sw, LPSS_I2C_TIMEOUT_US);
-
- if (!(segment->flags & I2C_M_RD)) {
- /* Write op only: Wait for FIFO not full */
- while (!(read32(®s->status) & STATUS_TX_FIFO_NOT_FULL)) {
- if (stopwatch_expired(&sw)) {
- printk(BIOS_ERR, "I2C transmit timeout\n");
- return -1;
- }
- }
- cmd = segment->buf[byte];
- }
-
- /* Send stop on last byte, if desired */
- if (send_stop && byte == segment->len - 1)
- cmd |= CMD_DATA_STOP;
-
- write32(®s->cmd_data, cmd);
-
- if (segment->flags & I2C_M_RD) {
- /* Read op only: Wait for FIFO data and store it */
- while (!(read32(®s->status) & STATUS_RX_FIFO_NOT_EMPTY)) {
- if (stopwatch_expired(&sw)) {
- printk(BIOS_ERR, "I2C receive timeout\n");
- return -1;
- }
- }
- segment->buf[byte] = read32(®s->cmd_data);
- }
-
- return 0;
-}
-
-int lpss_i2c_transfer(unsigned int bus,
- const struct i2c_msg *segments, size_t count)
-{
- struct stopwatch sw;
- struct lpss_i2c_regs *regs;
- size_t byte;
- int ret = -1;
-
- if (count == 0 || !segments)
- return -1;
-
- regs = (struct lpss_i2c_regs *)lpss_i2c_base_address(bus);
- if (!regs) {
- printk(BIOS_ERR, "I2C bus %u base address not found\n", bus);
- return -1;
- }
-
- lpss_i2c_enable(regs);
-
- if (lpss_i2c_wait_for_bus_idle(regs)) {
- printk(BIOS_ERR, "I2C timeout waiting for bus %u idle\n", bus);
- goto out;
- }
-
- /* Process each segment */
- while (count--) {
- if (CONFIG_SOC_INTEL_COMMON_BLOCK_I2C_DEBUG)
- printk(BIOS_DEBUG, "i2c %u:%02x %s %d bytes : ",
- bus, segments->slave,
- (segments->flags & I2C_M_RD) ? "R" : "W",
- segments->len);
-
- /* Set target slave address */
- write32(®s->target_addr, segments->slave);
-
- /* Read or write each byte in segment */
- for (byte = 0; byte < segments->len; byte++) {
- /*
- * Set stop condition on final segment only.
- * Repeated start will be automatically generated
- * by the controller on R->W or W->R switch.
- */
- if (lpss_i2c_transfer_byte(regs, segments, byte,
- count == 0) < 0) {
- printk(BIOS_ERR, "I2C %s failed: bus %u "
- "addr 0x%02x\n",
- (segments->flags & I2C_M_RD) ?
- "read" : "write", bus, segments->slave);
- goto out;
- }
- }
-
- if (CONFIG_SOC_INTEL_COMMON_BLOCK_I2C_DEBUG) {
- int j;
- for (j = 0; j < segments->len; j++)
- printk(BIOS_DEBUG, "%02x ", segments->buf[j]);
- printk(BIOS_DEBUG, "\n");
- }
-
- segments++;
- }
-
- /* Wait for interrupt status to indicate transfer is complete */
- stopwatch_init_usecs_expire(&sw, LPSS_I2C_TIMEOUT_US);
- while (!(read32(®s->raw_intr_stat) & INTR_STAT_STOP_DET)) {
- if (stopwatch_expired(&sw)) {
- printk(BIOS_ERR, "I2C stop bit not received\n");
- goto out;
- }
- }
-
- /* Read to clear INTR_STAT_STOP_DET */
- read32(®s->clear_stop_det_intr);
-
- /* Wait for the bus to go idle */
- if (lpss_i2c_wait_for_bus_idle(regs)) {
- printk(BIOS_ERR, "I2C timeout waiting for bus %u idle\n", bus);
- goto out;
- }
-
- /* Flush the RX FIFO in case it is not empty */
- stopwatch_init_usecs_expire(&sw, 16 * LPSS_I2C_TIMEOUT_US);
- while (read32(®s->status) & STATUS_RX_FIFO_NOT_EMPTY) {
- if (stopwatch_expired(&sw)) {
- printk(BIOS_ERR, "I2C timeout flushing RX FIFO\n");
- goto out;
- }
- read32(®s->cmd_data);
- }
-
- ret = 0;
-
-out:
- read32(®s->clear_intr);
- lpss_i2c_disable(regs);
- return ret;
-}
-
-/* Global I2C bus handler, defined in include/device/i2c_simple.h */
-int platform_i2c_transfer(unsigned int bus, struct i2c_msg *msg, int count)
-{
- return lpss_i2c_transfer(bus, msg, count < 0 ? 0 : count);
-}
-
-static int lpss_i2c_set_speed_config(unsigned int bus,
- const struct lpss_i2c_speed_config *config)
-{
- struct lpss_i2c_regs *regs;
- void *hcnt_reg, *lcnt_reg;
-
- regs = (struct lpss_i2c_regs *)lpss_i2c_base_address(bus);
- if (!regs || !config)
- return -1;
-
- /* Nothing to do if no values are set */
- if (!config->scl_lcnt && !config->scl_hcnt && !config->sda_hold)
- return 0;
-
- if (config->speed >= I2C_SPEED_HIGH) {
- /* High and Fast Ultra speed */
- hcnt_reg = ®s->hs_scl_hcnt;
- lcnt_reg = ®s->hs_scl_lcnt;
- } else if (config->speed >= I2C_SPEED_FAST) {
- /* Fast and Fast-Plus speed */
- hcnt_reg = ®s->fs_scl_hcnt;
- lcnt_reg = ®s->fs_scl_lcnt;
- } else {
- /* Standard speed */
- hcnt_reg = ®s->ss_scl_hcnt;
- lcnt_reg = ®s->ss_scl_lcnt;
- }
-
- /* SCL count must be set after the speed is selected */
- if (config->scl_hcnt)
- write32(hcnt_reg, config->scl_hcnt);
- if (config->scl_lcnt)
- write32(lcnt_reg, config->scl_lcnt);
-
- /* Set SDA Hold Time register */
- if (config->sda_hold)
- write32(®s->sda_hold, config->sda_hold);
-
- return 0;
-}
-
-static int lpss_i2c_gen_config_rise_fall_time(struct lpss_i2c_regs *regs,
- enum i2c_speed speed,
- const struct lpss_i2c_bus_config *bcfg,
- int ic_clk,
- struct lpss_i2c_speed_config *config)
-{
- const struct i2c_descriptor *bus;
- const struct soc_clock *soc;
- int fall_cnt, rise_cnt, min_tlow_cnt, min_thigh_cnt, spk_cnt;
- int hcnt, lcnt, period_cnt, diff, tot;
- int data_hold_time_ns;
-
- bus = get_bus_descriptor(speed);
- soc = get_soc_descriptor(ic_clk);
-
- if (bus == NULL) {
- printk(BIOS_ERR, "lpss_i2c: invalid bus speed %d\n", speed);
- return -1;
- }
-
- if (soc == NULL) {
- printk(BIOS_ERR, "lpss_i2c: invalid SoC clock speed %d MHz\n",
- ic_clk);
- return -1;
- }
-
- /* Get the proper spike suppression count based on target speed. */
- if (speed >= I2C_SPEED_HIGH)
- spk_cnt = read32(®s->hs_spklen);
- else
- spk_cnt = read32(®s->fs_spklen);
-
- /* Find the period, rise, fall, min tlow, and min thigh in terms of
- * counts of SoC clock. */
- period_cnt = counts_from_freq(&soc->freq, &bus->freq);
- rise_cnt = counts_from_time(&soc->freq, bcfg->rise_time_ns);
- fall_cnt = counts_from_time(&soc->freq, bcfg->fall_time_ns);
- min_tlow_cnt = counts_from_time(&soc->freq, bus->min_tlow_ns);
- min_thigh_cnt = counts_from_time(&soc->freq, bus->min_thigh_ns);
-
- printk(LPSS_DEBUG, "lpss_i2c: SoC %d/%d ns Bus: %d/%d ns\n",
- soc->freq.ticks, soc->freq.ns, bus->freq.ticks, bus->freq.ns);
- printk(LPSS_DEBUG, "lpss_i2c: period %d rise %d fall %d tlow %d thigh %d spk %d\n",
- period_cnt, rise_cnt, fall_cnt, min_tlow_cnt, min_thigh_cnt,
- spk_cnt);
-
- /*
- * Back solve for hcnt and lcnt according to the following equations.
- * SCL_High_time = [(HCNT + IC_*_SPKLEN + 7) * ic_clk] + SCL_Fall_time
- * SCL_Low_time = [(LCNT + 1) * ic_clk] - SCL_Fall_time + SCL_Rise_time
- */
- hcnt = min_thigh_cnt - fall_cnt - 7 - spk_cnt;
- lcnt = min_tlow_cnt - rise_cnt + fall_cnt - 1;
-
- if (hcnt < 0 || lcnt < 0) {
- printk(BIOS_ERR, "lpss_i2c: bad counts. hcnt = %d lcnt = %d\n",
- hcnt, lcnt);
- return -1;
- }
-
- /* Now add things back up to ensure the period is hit. If off,
- * split the difference and bias to lcnt for remainder. */
- tot = hcnt + lcnt + 7 + spk_cnt + rise_cnt + 1;
-
- if (tot < period_cnt) {
- diff = (period_cnt - tot) / 2;
- hcnt += diff;
- lcnt += diff;
- tot = hcnt + lcnt + 7 + spk_cnt + rise_cnt + 1;
- lcnt += period_cnt - tot;
- }
-
- config->speed = speed;
- config->scl_lcnt = lcnt;
- config->scl_hcnt = hcnt;
-
- /* Use internal default unless other value is specified. */
- data_hold_time_ns = DEFAULT_SDA_HOLD_TIME;
- if (bcfg->data_hold_time_ns)
- data_hold_time_ns = bcfg->data_hold_time_ns;
-
- config->sda_hold = counts_from_time(&soc->freq, data_hold_time_ns);
-
- printk(LPSS_DEBUG, "lpss_i2c: hcnt = %d lcnt = %d sda hold = %d\n",
- hcnt, lcnt, config->sda_hold);
-
- return 0;
-}
-
-int lpss_i2c_gen_speed_config(struct lpss_i2c_regs *regs,
- enum i2c_speed speed,
- const struct lpss_i2c_bus_config *bcfg,
- struct lpss_i2c_speed_config *config)
-{
- const int ic_clk = CONFIG_SOC_INTEL_COMMON_LPSS_CLOCK_MHZ;
- uint16_t hcnt_min, lcnt_min;
- int i;
-
- _Static_assert(CONFIG_SOC_INTEL_COMMON_LPSS_CLOCK_MHZ != 0,
- "SOC_INTEL_COMMON_LPSS_CLOCK_MHZ can't be zero!");
-
- /* Apply board specific override for this speed if found */
- for (i = 0; i < LPSS_I2C_SPEED_CONFIG_COUNT; i++) {
- if (bcfg->speed_config[i].speed != speed)
- continue;
- memcpy(config, &bcfg->speed_config[i], sizeof(*config));
- return 0;
- }
-
- /* If rise time is set use the time calculation. */
- if (bcfg->rise_time_ns)
- return lpss_i2c_gen_config_rise_fall_time(regs, speed, bcfg,
- ic_clk, config);
-
- if (speed >= I2C_SPEED_HIGH) {
- /* High speed */
- hcnt_min = MIN_HS_SCL_HIGHTIME;
- lcnt_min = MIN_HS_SCL_LOWTIME;
- } else if (speed >= I2C_SPEED_FAST_PLUS) {
- /* Fast-Plus speed */
- hcnt_min = MIN_FP_SCL_HIGHTIME;
- lcnt_min = MIN_FP_SCL_LOWTIME;
- } else if (speed >= I2C_SPEED_FAST) {
- /* Fast speed */
- hcnt_min = MIN_FS_SCL_HIGHTIME;
- lcnt_min = MIN_FS_SCL_LOWTIME;
- } else {
- /* Standard speed */
- hcnt_min = MIN_SS_SCL_HIGHTIME;
- lcnt_min = MIN_SS_SCL_LOWTIME;
- }
-
- config->speed = speed;
- config->scl_hcnt = ic_clk * hcnt_min / KHz;
- config->scl_lcnt = ic_clk * lcnt_min / KHz;
- config->sda_hold = ic_clk * DEFAULT_SDA_HOLD_TIME / KHz;
-
- return 0;
-}
-
-static int lpss_i2c_set_speed(unsigned int bus, enum i2c_speed speed,
- const struct lpss_i2c_bus_config *bcfg)
-{
- struct lpss_i2c_regs *regs;
- struct lpss_i2c_speed_config config;
- uint32_t control;
-
- /* Clock must be provided by Kconfig */
- regs = (struct lpss_i2c_regs *)lpss_i2c_base_address(bus);
- if (!regs || !speed)
- return -1;
-
- control = read32(®s->control);
- control &= ~CONTROL_SPEED_MASK;
-
- if (speed >= I2C_SPEED_HIGH) {
- /* High and Fast-Ultra speed share config registers */
- control |= CONTROL_SPEED_HS;
- } else if (speed >= I2C_SPEED_FAST) {
- /* Fast speed and Fast-Plus */
- control |= CONTROL_SPEED_FS;
- } else {
- /* Standard speed */
- control |= CONTROL_SPEED_SS;
- }
-
- /* Generate speed config based on clock */
- if (lpss_i2c_gen_speed_config(regs, speed, bcfg, &config) < 0)
- return -1;
-
- /* Select this speed in the control register */
- write32(®s->control, control);
-
- /* Write the speed config that was generated earlier */
- lpss_i2c_set_speed_config(bus, &config);
-
- return 0;
-}
-
-
-/*
- * Initialize this bus controller and set the speed.
- *
- * The bus speed can be passed in Hz or using values from device/i2c.h and
- * will default to I2C_SPEED_FAST if it is not provided.
- */
-int lpss_i2c_init(unsigned int bus, const struct lpss_i2c_bus_config *bcfg)
-{
- struct lpss_i2c_regs *regs;
- enum i2c_speed speed;
-
- if (!bcfg)
- return -1;
-
- speed = bcfg->speed ? : I2C_SPEED_FAST;
-
- regs = (struct lpss_i2c_regs *)lpss_i2c_base_address(bus);
- if (!regs) {
- printk(BIOS_ERR, "I2C bus %u base address not found\n", bus);
- return -1;
- }
-
- if (lpss_i2c_disable(regs) < 0) {
- printk(BIOS_ERR, "I2C timeout disabling bus %u\n", bus);
- return -1;
- }
-
- /* Put controller in master mode with restart enabled */
- write32(®s->control, CONTROL_MASTER_MODE | CONTROL_SLAVE_DISABLE |
- CONTROL_RESTART_ENABLE);
-
- /* Set bus speed to FAST by default */
- if (lpss_i2c_set_speed(bus, speed, bcfg) < 0) {
- printk(BIOS_ERR, "I2C failed to set speed for bus %u\n", bus);
- return -1;
- }
-
- /* Set RX/TX thresholds to smallest values */
- write32(®s->rx_thresh, 0);
- write32(®s->tx_thresh, 0);
-
- /* Enable stop detection interrupt */
- write32(®s->intr_mask, INTR_STAT_STOP_DET);
-
- printk(BIOS_INFO, "LPSS I2C bus %u at 0x%p (%u KHz)\n",
- bus, regs, speed / KHz);
-
- return 0;
-}
diff --git a/src/soc/intel/common/block/i2c/lpss_i2c.h b/src/soc/intel/common/block/i2c/lpss_i2c.h
deleted file mode 100644
index 72341621..0000000
--- a/src/soc/intel/common/block/i2c/lpss_i2c.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright 2017 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <compiler.h>
-#include <intelblocks/lpss_i2c.h>
-
-#define LPSS_DEBUG BIOS_NEVER
-
-/* I2C Controller MMIO register space */
-struct lpss_i2c_regs {
- uint32_t control;
- uint32_t target_addr;
- uint32_t slave_addr;
- uint32_t master_addr;
- uint32_t cmd_data;
- uint32_t ss_scl_hcnt;
- uint32_t ss_scl_lcnt;
- uint32_t fs_scl_hcnt;
- uint32_t fs_scl_lcnt;
- uint32_t hs_scl_hcnt;
- uint32_t hs_scl_lcnt;
- uint32_t intr_stat;
- uint32_t intr_mask;
- uint32_t raw_intr_stat;
- uint32_t rx_thresh;
- uint32_t tx_thresh;
- uint32_t clear_intr;
- uint32_t clear_rx_under_intr;
- uint32_t clear_rx_over_intr;
- uint32_t clear_tx_over_intr;
- uint32_t clear_rd_req_intr;
- uint32_t clear_tx_abrt_intr;
- uint32_t clear_rx_done_intr;
- uint32_t clear_activity_intr;
- uint32_t clear_stop_det_intr;
- uint32_t clear_start_det_intr;
- uint32_t clear_gen_call_intr;
- uint32_t enable;
- uint32_t status;
- uint32_t tx_level;
- uint32_t rx_level;
- uint32_t sda_hold;
- uint32_t tx_abort_source;
- uint32_t slv_data_nak_only;
- uint32_t dma_cr;
- uint32_t dma_tdlr;
- uint32_t dma_rdlr;
- uint32_t sda_setup;
- uint32_t ack_general_call;
- uint32_t enable_status;
- uint32_t fs_spklen;
- uint32_t hs_spklen;
- uint32_t clr_restart_det;
- uint32_t comp_param1;
- uint32_t comp_version;
- uint32_t comp_type;
-} __packed;
-
-/* Get I2C controller base address */
-uintptr_t lpss_i2c_base_address(unsigned int bus);
-
-/*
- * Initialize this bus controller and set the speed
- * Return value:
- * -1 = failure
- * 0 = success
-*/
-int lpss_i2c_init(unsigned int bus, const struct lpss_i2c_bus_config *bcfg);
-
-/*
- * Generate speed cofnig based on clock
- * Return value:
- * -1 = failure
- * 0 = success
-*/
-int lpss_i2c_gen_speed_config(struct lpss_i2c_regs *regs,
- enum i2c_speed speed,
- const struct lpss_i2c_bus_config *bcfg,
- struct lpss_i2c_speed_config *config);
-
-/*
- * Process given I2C segments in a single transfer
- * Return value:
- * -1 = failure
- * 0 = success
- */
-int lpss_i2c_transfer(unsigned int bus, const struct i2c_msg *, size_t count);