intel/sandybridge: Use postcar_frame for MTRR setup
Adapt implementation from skylake.
Change-Id: Ica3134a2261d3e84c714264cf75557322f9ef5db
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17673
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
diff --git a/src/northbridge/intel/sandybridge/ram_calc.c b/src/northbridge/intel/sandybridge/ram_calc.c
index 0253def..43442f1 100644
--- a/src/northbridge/intel/sandybridge/ram_calc.c
+++ b/src/northbridge/intel/sandybridge/ram_calc.c
@@ -19,7 +19,7 @@
#include <arch/cpu.h>
#include <arch/io.h>
#include <cbmem.h>
-#include <cpu/cpu.h>
+#include <console/console.h>
#include <cpu/intel/romstage.h>
#include <cpu/x86/mtrr.h>
#include <program_loading.h>
@@ -44,83 +44,41 @@
return (void *) smm_region_start();
}
-static inline u32 *stack_push(u32 *stack, u32 value)
-{
- stack = &stack[-1];
- *stack = value;
- return stack;
-}
+#define ROMSTAGE_RAM_STACK_SIZE 0x5000
/* setup_stack_and_mtrrs() determines the stack to use after
* cache-as-ram is torn down as well as the MTRR settings to use. */
void *setup_stack_and_mtrrs(void)
{
- int num_mtrrs;
- u32 *slot;
- u32 mtrr_mask_upper;
- u32 top_of_ram;
+ struct postcar_frame pcf;
+ uintptr_t top_of_ram;
- /* Top of stack needs to be aligned to a 4-byte boundary. */
- slot = (void *)romstage_ram_stack_top();
- num_mtrrs = 0;
-
- /* The upper bits of the MTRR mask need to set according to the number
- * of physical address bits. */
- mtrr_mask_upper = (1 << (cpu_phys_address_size() - 32)) - 1;
-
- /* The order for each MTRR is value then base with upper 32-bits of
- * each value coming before the lower 32-bits. The reasoning for
- * this ordering is to create a stack layout like the following:
- * +0: Number of MTRRs
- * +4: MTRR base 0 31:0
- * +8: MTRR base 0 63:32
- * +12: MTRR mask 0 31:0
- * +16: MTRR mask 0 63:32
- * +20: MTRR base 1 31:0
- * +24: MTRR base 1 63:32
- * +28: MTRR mask 1 31:0
- * +32: MTRR mask 1 63:32
- */
+ if (postcar_frame_init(&pcf, ROMSTAGE_RAM_STACK_SIZE))
+ die("Unable to initialize postcar frame.\n");
/* Cache the ROM as WP just below 4GiB. */
- slot = stack_push(slot, mtrr_mask_upper); /* upper mask */
- slot = stack_push(slot, ~(CACHE_ROM_SIZE - 1) | MTRR_PHYS_MASK_VALID);
- slot = stack_push(slot, 0); /* upper base */
- slot = stack_push(slot, ~(CACHE_ROM_SIZE - 1) | MTRR_TYPE_WRPROT);
- num_mtrrs++;
+ postcar_frame_add_mtrr(&pcf, -CACHE_ROM_SIZE, CACHE_ROM_SIZE,
+ MTRR_TYPE_WRPROT);
/* Cache RAM as WB from 0 -> CACHE_TMP_RAMTOP. */
- slot = stack_push(slot, mtrr_mask_upper); /* upper mask */
- slot = stack_push(slot, ~(CACHE_TMP_RAMTOP - 1) | MTRR_PHYS_MASK_VALID);
- slot = stack_push(slot, 0); /* upper base */
- slot = stack_push(slot, 0 | MTRR_TYPE_WRBACK);
- num_mtrrs++;
+ postcar_frame_add_mtrr(&pcf, 0, CACHE_TMP_RAMTOP, MTRR_TYPE_WRBACK);
- top_of_ram = (uint32_t)cbmem_top();
+ top_of_ram = (uintptr_t)cbmem_top();
/* Cache 8MiB below the top of ram. On sandybridge systems the top of
* ram under 4GiB is the start of the TSEG region. It is required to
* be 8MiB aligned. Set this area as cacheable so it can be used later
* for ramstage before setting up the entire RAM as cacheable. */
- slot = stack_push(slot, mtrr_mask_upper); /* upper mask */
- slot = stack_push(slot, ~((8 << 20) - 1) | MTRR_PHYS_MASK_VALID);
- slot = stack_push(slot, 0); /* upper base */
- slot = stack_push(slot, (top_of_ram - (8 << 20)) | MTRR_TYPE_WRBACK);
- num_mtrrs++;
+ postcar_frame_add_mtrr(&pcf, top_of_ram - 8*MiB, 8*MiB, MTRR_TYPE_WRBACK);
/* Cache 8MiB at the top of ram. Top of ram on sandybridge systems
* is where the TSEG region resides. However, it is not restricted
* to SMM mode until SMM has been relocated. By setting the region
* to cacheable it provides faster access when relocating the SMM
* handler as well as using the TSEG region for other purposes. */
- slot = stack_push(slot, mtrr_mask_upper); /* upper mask */
- slot = stack_push(slot, ~((8 << 20) - 1) | MTRR_PHYS_MASK_VALID);
- slot = stack_push(slot, 0); /* upper base */
- slot = stack_push(slot, top_of_ram | MTRR_TYPE_WRBACK);
- num_mtrrs++;
+ postcar_frame_add_mtrr(&pcf, top_of_ram, 8*MiB, MTRR_TYPE_WRBACK);
/* Save the number of MTRRs to setup. Return the stack location
- * pointing to the number of MTRRs. */
- slot = stack_push(slot, num_mtrrs);
-
- return slot;
+ * pointing to the number of MTRRs.
+ */
+ return postcar_commit_mtrrs(&pcf);
}