blob: 646b9a3411cd4fe4554410018a8d2df4616a6451 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-or-later
chip northbridge/intel/sandybridge
device domain 0 on
device ref host_bridge on # Host bridge
subsystemid 0x1849 0x0100
end
device ref peg10 on end # PEG - slot "PCIE1"
device ref igd on # iGPU
subsystemid 0x1849 0x0102
end
chip southbridge/intel/bd82x6x # Intel Series 7 Panther Point PCH
register "gen1_dec" = "0x000c0291"
register "gen2_dec" = "0x000c0241"
register "gen3_dec" = "0x000c0251"
register "sata_interface_speed_support" = "0x3"
register "sata_port_map" = "0x3f"
register "spi_lvscc" = "0x2005"
register "spi_uvscc" = "0x2005"
register "superspeed_capable_ports" = "0x0000000f"
register "xhci_overcurrent_mapping" = "0x00000c03"
register "xhci_switchable_ports" = "0x0000000f"
device ref xhci on # USB 3.0 Controller
subsystemid 0x1849 0x1e31
end
device ref mei1 on # Management Engine Interface 1
subsystemid 0x1849 0x1e3a
end
device ref mei2 off end # Management Engine Interface 2
device ref me_ide_r off end # Management Engine IDE-R
device ref me_kt off end # Management Engine KT
device ref gbe off end # Intel Gigabit Ethernet
device ref ehci2 on # USB2 EHCI #2
subsystemid 0x1849 0x1e2d
end
device ref hda on # High Definition Audio
subsystemid 0x1849 0x8892
end
device ref pcie_rp1 on # PCIe Port #1 - slot "PCIE4", 4 lanes
subsystemid 0x1849 0x1e10
end
device ref pcie_rp2 off end # PCIe Port #2
device ref pcie_rp3 off end # PCIe Port #3
device ref pcie_rp4 off end # PCIe Port #4
device ref pcie_rp5 on # PCIe Port #5 - slot "PCIE2", 1 lane
subsystemid 0x1849 0x1e18
end
device ref pcie_rp6 on # PCIe Port #6 - RTL8111E GbE
subsystemid 0x1849 0x1e1a
end
device ref pcie_rp7 on # PCIe Port #7 - slot "PCIE3", 1 lane
subsystemid 0x1849 0x1e16
end
device ref pcie_rp8 on # PCIe Port #8 - ASM1061 SATA Controller
subsystemid 0x1849 0x1e1e
end
device ref ehci1 on # USB2 EHCI #1
subsystemid 0x1849 0x1e26
end
device ref pci_bridge off end # PCI bridge
device ref lpc on # LPC bridge
subsystemid 0x1849 0x1e4a
chip superio/nuvoton/nct6776
device pnp 2e.0 off end # Floppy
device pnp 2e.1 on # Parallel port
io 0x60 = 0x378
irq 0x70 = 5
drq 0x74 = 3
end
device pnp 2e.2 on # COM1
io 0x60 = 0x3f8
irq 0x70 = 4
end
device pnp 2e.3 off end # COM2, IR
device pnp 2e.5 on # Keyboard
io 0x60 = 0x60
io 0x62 = 0x64
irq 0x70 = 1
irq 0x72 = 12
end
device pnp 2e.6 off end # CIR
device pnp 2e.7 off end # GPIO8
device pnp 2e.107 off end # GPIO9
device pnp 2e.8 off end # WDT1
device pnp 2e.108 off end # GPIO0
device pnp 2e.208 off end # GPIOA
device pnp 2e.308 on # GPIO base
io 0x60 = 0x0
irq 0xf0 = 0x3e # + GPIO1 direction
irq 0xf1 = 0xde # + GPIO1 value
end
device pnp 2e.109 on end # GPIO1
device pnp 2e.209 on # GPIO2
irq 0xe0 = 0xff # + GPIO2 direction
irq 0xe1 = 0x0c # + GPIO2 value
end
device pnp 2e.309 on # GPIO3
irq 0xe4 = 0xf7 # + GPIO3 direction
irq 0xe5 = 0x08 # + GPIO3 value
end
device pnp 2e.409 off end # GPIO4
device pnp 2e.509 off end # GPIO5
device pnp 2e.609 off end # GPIO6
device pnp 2e.709 on end # GPIO7
device pnp 2e.a on # ACPI
irq 0xe4 = 0x10 # + enable 3VSBSW#
irq 0xf0 = 0x20 # + pin 70 = 3VSBSW
end
device pnp 2e.b on # HWM, front panel LED
irq 0x30 = 0xe1 # + Fan RPM sense pins
io 0x60 = 0x0290 # + HWM base address
end
device pnp 2e.d off end # VID
device pnp 2e.e off end # CIR WAKE-UP
device pnp 2e.f off end # GPIO Push-Pull or Open-drain
device pnp 2e.14 off end # SVID
device pnp 2e.16 off end # Deep Sleep
device pnp 2e.17 off end # GPIOA
end
end
device ref sata1 on # SATA (AHCI)
subsystemid 0x1849 0x1e02
end
device ref smbus on # SMBus
subsystemid 0x1849 0x1e22
end
device ref sata2 off end # SATA (Legacy)
device ref thermal off end # Thermal
end
end
end