| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <acpi/acpi.h> |
| #include <device/device.h> |
| #include <device/pci.h> |
| #include <device/pci_ids.h> |
| #include <stdint.h> |
| #include <reg_script.h> |
| |
| #include <soc/iomap.h> |
| #include <soc/iosf.h> |
| #include <soc/pci_devs.h> |
| #include <soc/pm.h> |
| #include <soc/ramstage.h> |
| #include <soc/ehci.h> |
| |
| #include "chip.h" |
| |
| static const struct reg_script ehci_init_script[] = { |
| /* Enable S0 PLL shutdown |
| * D29:F0:7A[12,10,7,6,4,3,2,1]=11111111b */ |
| REG_PCI_OR16(0x7a, 0x14de), |
| /* Enable SB local clock gating |
| * D29:F0:7C[14,3,2]=111b (14 set in clock gating step) */ |
| REG_PCI_OR32(0x7c, 0x0000000c), |
| REG_PCI_OR32(0x8c, 0x00000001), |
| /* Enable dynamic clock gating 0x4001=0xCE */ |
| REG_IOSF_RMW(IOSF_PORT_USBPHY, 0x4001, 0xFFFFFF00, 0xCE), |
| /* Magic RCBA register set sequence */ |
| /* RCBA + 0x200=0x1 */ |
| REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x200, 0x00000001), |
| /* RCBA + 0x204=0x2 */ |
| REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x204, 0x00000002), |
| /* RCBA + 0x208=0x0 */ |
| REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x208, 0x00000000), |
| /* RCBA + 0x240[4,3,2,1,0]=00000b */ |
| REG_MMIO_RMW32(RCBA_BASE_ADDRESS + 0x240, ~0x0000001f, 0), |
| /* RCBA + 0x318[9,8,6,5,4,3,2,1,0]=000000111b */ |
| REG_MMIO_RMW32(RCBA_BASE_ADDRESS + 0x318, ~0x00000378, 0x00000007), |
| /* RCBA + 0x31c[3,2,1,0]=0011b */ |
| REG_MMIO_RMW32(RCBA_BASE_ADDRESS + 0x31c, ~0x0000000c, 0x00000003), |
| REG_SCRIPT_END |
| }; |
| |
| static const struct reg_script ehci_clock_gating_script[] = { |
| /* Enable SB local clock gating */ |
| REG_PCI_OR32(0x7c, 0x00004000), |
| /* RCBA + 0x284=0xbe (step B0+) */ |
| REG_MMIO_WRITE32(RCBA_BASE_ADDRESS + 0x284, 0x000000be), |
| REG_SCRIPT_END |
| }; |
| |
| static const struct reg_script ehci_disable_script[] = { |
| /* Clear Run/Stop Bit */ |
| REG_RES_RMW32(PCI_BASE_ADDRESS_0, USB2CMD, ~USB2CMD_RS, 0), |
| /* Wait for HC Halted */ |
| REG_RES_POLL32(PCI_BASE_ADDRESS_0, USB2STS, |
| USB2STS_HCHALT, USB2STS_HCHALT, 10000), |
| /* Disable Interrupts */ |
| REG_PCI_OR32(EHCI_CMD_STS, INTRDIS), |
| /* Disable Asynchronous and Periodic Scheduler */ |
| REG_RES_RMW32(PCI_BASE_ADDRESS_0, USB2CMD, |
| ~(USB2CMD_ASE | USB2CMD_PSE), 0), |
| /* Disable port wake */ |
| REG_PCI_RMW32(EHCI_SBRN_FLA_PWC, ~(PORTWKIMP | PORTWKCAPMASK), 0), |
| /* Set Function Disable bit in RCBA */ |
| REG_MMIO_OR32(RCBA_BASE_ADDRESS + RCBA_FUNC_DIS, RCBA_EHCI_DIS), |
| REG_SCRIPT_END |
| }; |
| |
| static const struct reg_script ehci_hc_reset[] = { |
| REG_RES_OR16(PCI_BASE_ADDRESS_0, USB2CMD, USB2CMD_HCRESET), |
| REG_SCRIPT_END |
| }; |
| |
| static void usb2_phy_init(struct device *dev) |
| { |
| struct soc_intel_baytrail_config *config = config_of(dev); |
| u32 usb2_comp_bg = (config->usb2_comp_bg == 0 ? |
| 0x4700 : config->usb2_comp_bg); |
| struct reg_script usb2_phy_script[] = { |
| /* USB3PHYInit() */ |
| REG_IOSF_WRITE(IOSF_PORT_USBPHY, USBPHY_COMPBG, |
| usb2_comp_bg), |
| /* Per port phy settings, set in devicetree.cb */ |
| REG_IOSF_WRITE(IOSF_PORT_USBPHY, USBPHY_PER_PORT_LANE0, |
| config->usb2_per_port_lane0), |
| REG_IOSF_WRITE(IOSF_PORT_USBPHY, |
| USBPHY_PER_PORT_RCOMP_HS_PULLUP0, |
| config->usb2_per_port_rcomp_hs_pullup0), |
| REG_IOSF_WRITE(IOSF_PORT_USBPHY, USBPHY_PER_PORT_LANE1, |
| config->usb2_per_port_lane1), |
| REG_IOSF_WRITE(IOSF_PORT_USBPHY, |
| USBPHY_PER_PORT_RCOMP_HS_PULLUP1, |
| config->usb2_per_port_rcomp_hs_pullup1), |
| REG_IOSF_WRITE(IOSF_PORT_USBPHY, USBPHY_PER_PORT_LANE2, |
| config->usb2_per_port_lane2), |
| REG_IOSF_WRITE(IOSF_PORT_USBPHY, |
| USBPHY_PER_PORT_RCOMP_HS_PULLUP2, |
| config->usb2_per_port_rcomp_hs_pullup2), |
| REG_IOSF_WRITE(IOSF_PORT_USBPHY, USBPHY_PER_PORT_LANE3, |
| config->usb2_per_port_lane3), |
| REG_IOSF_WRITE(IOSF_PORT_USBPHY, |
| USBPHY_PER_PORT_RCOMP_HS_PULLUP3, |
| config->usb2_per_port_rcomp_hs_pullup3), |
| REG_SCRIPT_END |
| }; |
| reg_script_run(usb2_phy_script); |
| } |
| |
| static void ehci_init(struct device *dev) |
| { |
| struct soc_intel_baytrail_config *config = config_of(dev); |
| struct reg_script ehci_hc_init[] = { |
| /* Controller init */ |
| REG_SCRIPT_NEXT(ehci_init_script), |
| /* Enable clock gating */ |
| REG_SCRIPT_NEXT(ehci_clock_gating_script), |
| /* |
| * Disable ports if requested |
| */ |
| /* Open per-port disable control override */ |
| REG_IO_RMW16(ACPI_BASE_ADDRESS + UPRWC, ~0, UPRWC_WR_EN), |
| REG_PCI_WRITE8(EHCI_USB2PDO, config->usb2_port_disable_mask), |
| /* Close per-port disable control override */ |
| REG_IO_RMW16(ACPI_BASE_ADDRESS + UPRWC, ~UPRWC_WR_EN, 0), |
| REG_SCRIPT_END |
| }; |
| |
| /* Don't reset controller in S3 resume path */ |
| if (!acpi_is_wakeup_s3()) |
| reg_script_run_on_dev(dev, ehci_hc_reset); |
| |
| /* Disable controller if ports are routed to XHCI */ |
| if (config->usb_route_to_xhci) { |
| /* Disable controller */ |
| reg_script_run_on_dev(dev, ehci_disable_script); |
| |
| /* Hide device with southcluster function */ |
| dev->enabled = 0; |
| southcluster_enable_dev(dev); |
| } else { |
| /* Initialize EHCI controller */ |
| reg_script_run_on_dev(dev, ehci_hc_init); |
| } |
| |
| /* Setup USB2 PHY based on board config */ |
| usb2_phy_init(dev); |
| } |
| |
| static struct device_operations ehci_device_ops = { |
| .read_resources = pci_dev_read_resources, |
| .set_resources = pci_dev_set_resources, |
| .enable_resources = pci_dev_enable_resources, |
| .init = ehci_init, |
| .ops_pci = &soc_pci_ops, |
| }; |
| |
| static const struct pci_driver baytrail_ehci __pci_driver = { |
| .ops = &ehci_device_ops, |
| .vendor = PCI_VENDOR_ID_INTEL, |
| .device = EHCI_DEVID |
| }; |