| config SOC_INTEL_BAYTRAIL |
| bool |
| help |
| Bay Trail M/D part support. |
| |
| if SOC_INTEL_BAYTRAIL |
| |
| config CPU_SPECIFIC_OPTIONS |
| def_bool y |
| select ACPI_INTEL_HARDWARE_SLEEP_VALUES |
| select ARCH_BOOTBLOCK_X86_32 |
| select ARCH_VERSTAGE_X86_32 |
| select ARCH_ROMSTAGE_X86_32 |
| select ARCH_RAMSTAGE_X86_32 |
| select BOOT_DEVICE_SUPPORTS_WRITES |
| select CACHE_MRC_SETTINGS |
| select CPU_INTEL_TURBO_NOT_PACKAGE_SCOPED |
| select SUPPORT_CPU_UCODE_IN_CBFS |
| select HAVE_SMI_HANDLER |
| select SOUTHBRIDGE_INTEL_COMMON_RESET |
| select SOUTHBRIDGE_INTEL_COMMON_SPI_SILVERMONT |
| select NO_FIXED_XIP_ROM_SIZE |
| select PARALLEL_MP |
| select PCIEXP_ASPM |
| select PCIEXP_COMMON_CLOCK |
| select REG_SCRIPT |
| select RTC |
| select SMP |
| select SPI_FLASH |
| select SSE2 |
| select TSC_MONOTONIC_TIMER |
| select TSC_SYNC_MFENCE |
| select UDELAY_TSC |
| select SOC_INTEL_COMMON |
| select INTEL_DESCRIPTOR_MODE_CAPABLE |
| select HAVE_SPI_CONSOLE_SUPPORT |
| select INTEL_GMA_ACPI |
| select INTEL_GMA_SWSMISCI |
| select CPU_INTEL_COMMON |
| select CPU_HAS_L2_ENABLE_MSR |
| select ROMCC_BOOTBLOCK |
| |
| config VBOOT |
| select VBOOT_MUST_REQUEST_DISPLAY |
| select VBOOT_STARTS_IN_ROMSTAGE |
| |
| config BOOTBLOCK_CPU_INIT |
| string |
| default "soc/intel/baytrail/bootblock/bootblock.c" |
| |
| config MMCONF_BASE_ADDRESS |
| hex |
| default 0xe0000000 |
| |
| config MAX_CPUS |
| int |
| default 4 |
| |
| config CPU_ADDR_BITS |
| int |
| default 36 |
| |
| config SMM_TSEG_SIZE |
| hex |
| default 0x800000 |
| |
| config SMM_RESERVED_SIZE |
| hex |
| default 0x100000 |
| |
| config HAVE_MRC |
| bool "Add a System Agent binary" |
| help |
| Select this option to add a System Agent binary to |
| the resulting coreboot image. |
| |
| Note: Without this binary coreboot will not work |
| |
| config MRC_FILE |
| string "Intel System Agent path and filename" |
| depends on HAVE_MRC |
| default "mrc.bin" |
| help |
| The path and filename of the file to use as System Agent |
| binary. |
| |
| config MRC_BIN_ADDRESS |
| hex |
| default 0xfffa0000 |
| |
| config MRC_RMT |
| bool "Enable MRC RMT training + debug prints" |
| default n |
| |
| # Cache As RAM region layout: |
| # |
| # +-------------+ DCACHE_RAM_BASE + DCACHE_RAM_SIZE + DCACHE_RAM_MRC_VAR_SIZE |
| # | MRC usage | |
| # | | |
| # +-------------+ DCACHE_RAM_BASE + DCACHE_RAM_SIZE |
| # | Stack | |
| # | | | |
| # | v | |
| # +-------------+ |
| # | ^ | |
| # | | | |
| # | CAR Globals | |
| # +-------------+ DCACHE_RAM_BASE |
| # |
| # Note that the MRC binary is linked to assume the region marked as "MRC usage" |
| # starts at DCACHE_RAM_BASE + DCACHE_RAM_SIZE. If those values change then |
| # a new MRC binary needs to be produced with the updated start and size |
| # information. |
| |
| config DCACHE_RAM_BASE |
| hex |
| default 0xfe000000 |
| |
| config DCACHE_RAM_SIZE |
| hex |
| default 0x8000 |
| help |
| The size of the cache-as-ram region required during bootblock |
| and/or romstage. Note DCACHE_RAM_SIZE and DCACHE_RAM_MRC_VAR_SIZE |
| must add up to a power of 2. |
| |
| config DCACHE_RAM_MRC_VAR_SIZE |
| hex |
| default 0x8000 |
| help |
| The amount of cache-as-ram region required by the reference code. |
| |
| config RESET_ON_INVALID_RAMSTAGE_CACHE |
| bool "Reset the system on S3 wake when ramstage cache invalid." |
| default n |
| help |
| The baytrail romstage code caches the loaded ramstage program |
| in SMM space. On S3 wake the romstage will copy over a fresh |
| ramstage that was cached in the SMM space. This option determines |
| the action to take when the ramstage cache is invalid. If selected |
| the system will reset otherwise the ramstage will be reloaded from |
| cbfs. |
| |
| config ENABLE_BUILTIN_COM1 |
| bool "Enable builtin COM1 Serial Port" |
| default n |
| help |
| The PMC has a legacy COM1 serial port. Choose this option to |
| configure the pads and enable it. This serial port can be used for |
| the debug console. |
| |
| config HAVE_REFCODE_BLOB |
| depends on ARCH_X86 |
| bool "An external reference code blob should be put into cbfs." |
| default n |
| help |
| The reference code blob will be placed into cbfs. |
| |
| if HAVE_REFCODE_BLOB |
| |
| config REFCODE_BLOB_FILE |
| string "Path and filename to reference code blob." |
| default "refcode.elf" |
| help |
| The path and filename to the file to be added to cbfs. |
| |
| endif # HAVE_REFCODE_BLOB |
| |
| config VGA_BIOS_ID |
| string |
| depends on VGA_BIOS |
| default "8086,0f31" |
| |
| config VGA_BIOS_FILE |
| string |
| depends on VGA_BIOS |
| default "pci8086,0f31.rom" |
| |
| endif |