| # SPDX-License-Identifier: GPL-2.0-only |
| |
| chip northbridge/amd/agesa/family15tn/root_complex |
| |
| device cpu_cluster 0 on |
| chip cpu/amd/agesa/family15tn |
| device lapic 10 on end |
| end |
| end |
| |
| device domain 0 on |
| subsystemid 0x1022 0x1410 inherit |
| chip northbridge/amd/agesa/family15tn |
| device pci 0.0 on end # Root Complex |
| device pci 0.2 on end # IOMMU |
| device pci 1.0 on end # Internal Graphics P2P bridge 0x990e |
| device pci 1.1 on end # Internal Multimedia |
| device pci 2.0 on end # PCIe x16 |
| device pci 3.0 off end # - |
| device pci 4.0 on end # PCIE Realtek LAN |
| device pci 5.0 on end # PCIE x1 (1) |
| device pci 6.0 on end # PCIE x1 (2) |
| device pci 7.0 off end # LAN |
| device pci 8.0 off end # NB/SB Link P2P bridge |
| end #chip northbridge/amd/agesa/family15tn |
| |
| chip southbridge/amd/agesa/hudson |
| device pci 10.0 on end # USB XHCI |
| device pci 10.1 on end # USB XHCI |
| device pci 11.0 on end # SATA |
| device pci 12.0 on end # USB OHCI |
| device pci 12.2 on end # USB EHCI |
| device pci 13.0 on end # USB OHCI |
| device pci 13.2 on end # USB EHCI |
| device pci 14.0 on end # SMBUS |
| device pci 14.1 off end # IDE 0x439c |
| device pci 14.2 on end # Azalia (Audio) |
| device pci 14.3 on # LPC 0x439d |
| chip superio/fintek/f71869ad |
| register "multi_function_register_1" = "0x01" |
| register "multi_function_register_2" = "0x0f" |
| register "multi_function_register_3" = "0x2f" |
| register "multi_function_register_4" = "0x04" |
| register "multi_function_register_5" = "0x3e" |
| |
| # HWM configuration registers |
| register "hwm_smbus_address" = "0x98" |
| register "hwm_smbus_control_reg" = "0x02" |
| register "hwm_fan_type_sel_reg" = "0x00" |
| register "hwm_fan1_temp_adj_rate_reg" = "0x33" |
| register "hwm_fan_mode_sel_reg" = "0x07" |
| register "hwm_fan1_idx_rpm_mode" = "0x0e" |
| register "hwm_fan1_seg1_speed_count" = "0xff" |
| register "hwm_fan1_seg2_speed_count" = "0x0e" |
| register "hwm_fan1_seg3_speed_count" = "0x07" |
| register "hwm_fan1_temp_map_sel" = "0x8c" |
| register "hwm_temp_sensor_type" = "0x08" |
| |
| device pnp 4e.00 off end |
| device pnp 4e.01 on # COM1 |
| io 0x60 = 0x3f8 |
| irq 0x70 = 4 |
| end |
| device pnp 4e.02 off # COM2 (Level converter not populated, but may be usable?) |
| io 0x60 = 0x2f8 |
| irq 0x70 = 3 |
| end |
| device pnp 4e.03 on # Parallel Port |
| io 0x60 = 0x378 |
| irq 0x70 = 5 |
| drq 0x74 = 3 |
| irq 0xf0 = 0x44 # PRT Mode Select Register |
| end |
| device pnp 4e.04 on # Hardware Monitor |
| io 0x60 = 0x225 # Fintek datasheet says 0x295. |
| irq 0x70 = 0 |
| end |
| device pnp 4e.05 on # KBC |
| io 0x60 = 0x060 |
| irq 0x70 = 1 # Keyboard IRQ |
| irq 0x72 = 12 # Mouse IRQ |
| end |
| device pnp 4e.06 on # GPIO |
| # ! GPIO config is disabled because the code in romstage.c |
| # ! has already taken care of it |
| #io 0x60 = 0xa00 |
| #irq 0xe0 = 0x04 # GPIO1 output |
| #irq 0xe1 = 0xff # GPIO1 output data |
| #irq 0xe3 = 0x04 # GPIO1 drive enable |
| #irq 0xe4 = 0x00 # GPIO1 PME enable |
| #irq 0xe5 = 0x00 # GPIO1 input detect select |
| #irq 0xe6 = 0x40 # GPIO1 event status |
| |
| #irq 0xd0 = 0x00 # GPIO2 output |
| #irq 0xd1 = 0xff # GPIO2 output data |
| #irq 0xd3 = 0x00 # GPIO2 drive enable |
| |
| #irq 0xc0 = 0x00 # GPIO3 output |
| #irq 0xc1 = 0xff # GPIO3 output data |
| |
| #irq 0xb0 = 0x04 # GPIO4 output |
| #irq 0xb1 = 0x04 # GPIO4 output data |
| #irq 0xb3 = 0x04 # GPIO4 drive enable |
| #irq 0xb4 = 0x00 # GPIO4 PME enable |
| #irq 0xb5 = 0x00 # GPIO4 input detect select |
| #irq 0xb6 = 0x00 # GPIO4 event status |
| |
| #irq 0xa0 = 0x00 # GPIO5 output |
| #irq 0xa1 = 0x1f # GPIO5 output data |
| #irq 0xa3 = 0x00 # GPIO5 drive enable |
| #irq 0xa4 = 0x00 # GPIO5 PME enable |
| #irq 0xa5 = 0xff # GPIO5 input detect select |
| #irq 0xa6 = 0xe0 # GPIO5 event status |
| |
| #irq 0x90 = 0x00 # GPIO6 output |
| #irq 0x91 = 0xff # GPIO6 output data |
| #irq 0x93 = 0x00 # GPIO6 drive enable |
| |
| #irq 0x80 = 0x00 # GPIO7 output |
| #irq 0x81 = 0xff # GPIO7 output data |
| #irq 0x83 = 0x00 # GPIO7 drive enable |
| end |
| |
| device pnp 4e.07 on end # WDT |
| device pnp 4e.08 off end # CIR |
| device pnp 4e.0a on end # PME |
| end # f71869ad |
| end #device pci 14.3 # LPC |
| device pci 14.4 on end # PCI 0x4384 (PCI slot on board) |
| device pci 14.5 on end # USB OHCI |
| device pci 14.6 off end # Gec |
| device pci 14.7 off end # SD |
| device pci 15.0 off end # unused |
| device pci 15.1 off end # unused |
| device pci 15.2 off end # unused |
| device pci 15.3 off end # unused |
| |
| end #chip southbridge/amd/agesa/hudson |
| |
| chip northbridge/amd/agesa/family15tn |
| device pci 18.0 on end |
| device pci 18.1 on end |
| device pci 18.2 on end |
| device pci 18.3 on end |
| device pci 18.4 on end |
| device pci 18.5 on end |
| |
| register "spdAddrLookup" = " |
| { |
| { {0xA0, 0xA4}, {0xA2, 0xA6}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses |
| { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses |
| }" |
| end |
| |
| end #domain |
| end #chip northbridge/amd/agesa/family15tn/root_complex |