| ## SPDX-License-Identifier: GPL-2.0-only |
| |
| chip soc/intel/denverton_ns |
| |
| # configure pirq routing |
| register "pirqa_routing" = "11" |
| register "pirqb_routing" = "10" |
| register "pirqc_routing" = "06" |
| register "pirqd_routing" = "07" |
| register "pirqe_routing" = "12" |
| register "pirqf_routing" = "14" |
| register "pirqg_routing" = "15" |
| register "pirqh_routing" = "15" |
| # configure device interrupt routing |
| register "ir00_routing" = "0x3217" # IR00, Dev31 |
| register "ir01_routing" = "0x3210" # IR01, Dev22 |
| register "ir02_routing" = "0x3211" # IR02, Dev23 |
| register "ir03_routing" = "0x3217" # IR03, Dev5 |
| register "ir04_routing" = "0x3212" # IR04, Dev6 |
| register "ir05_routing" = "0x3210" # IR05, Dev24 |
| register "ir06_routing" = "0x3214" # IR06, Dev19 |
| register "ir07_routing" = "0x3210" # IR07, Dev9/10/11/12 |
| register "ir08_routing" = "0x7654" # IR08, Dev14/15/16/17 |
| register "ir09_routing" = "0x3213" # IR09, Dev21 |
| register "ir10_routing" = "0x3210" # IR10, Dev26/18 |
| register "ir11_routing" = "0x3215" # IR11, Dev20 |
| register "ir12_routing" = "0x3210" # IR12, Dev27 |
| # configure interrupt polarity control |
| register "ipc0" = "0x00ff4000" # IPC0, PIRQA-H (IRQ16-23) should always be ActiveLow |
| register "ipc1" = "0x00000000" # IPC1 |
| register "ipc2" = "0x00000000" # IPC2 |
| register "ipc3" = "0x00000000" # IPC3 |
| |
| device cpu_cluster 0 on |
| device lapic 0 on end |
| end |
| |
| device domain 0 on |
| device pci 00.0 on end # Host Bridge |
| device pci 04.0 on end # RAS |
| device pci 05.0 on end # RCEC(Root Complex Event Collector) |
| device pci 06.0 on end # Virtual root port 2 (QAT) |
| device pci 09.0 on end # PCI Express Port 0, cluster #0, x8 |
| device pci 0e.0 on end # PCI Express Port 4, cluster #1, x4 |
| device pci 10.0 on end # PCI Express Port 6, cluster #1, x4 |
| device pci 12.0 on end # SMBus Controller 1 |
| device pci 14.0 on end # SATA Controller 1 |
| device pci 15.0 on end # XHCI USB Controller |
| device pci 16.0 on end # Virtual root port 0 (10GBE0) |
| device pci 17.0 on end # Virtual root port 1 (10GBE1) |
| device pci 18.0 on end # CSME HECI 1 |
| device pci 1a.0 on end # UART 0 |
| device pci 1a.1 on end # UART 1 |
| device pci 1a.2 on end # UART 2 |
| device pci 1c.0 on end # eMMC |
| device pci 1f.0 on end # LPC bridge |
| device pci 1f.2 on end # PMC/ACPI |
| device pci 1f.4 on end # SMBus Controller 0 |
| device pci 1f.5 on end # SPI Controller |
| end |
| end |