| chip northbridge/amd/amdk8/root_complex # Root complex |
| device cpu_cluster 0 on # APIC cluster |
| chip cpu/amd/socket_754 # CPU |
| device lapic 0 on end # APIC |
| end |
| end |
| device domain 0 on # PCI domain |
| subsystemid 0x1043 0x80ed inherit |
| chip northbridge/amd/amdk8 # mc0 |
| device pci 18.0 on # Northbridge |
| # Devices on link 0, link 0 == LDT 0 |
| chip southbridge/via/vt8237r # Southbridge |
| register "ide0_enable" = "1" # Enable IDE channel 0 |
| register "ide1_enable" = "1" # Enable IDE channel 1 |
| register "ide0_80pin_cable" = "1" # 80pin cable on IDE channel 0 |
| register "ide1_80pin_cable" = "1" # 80pin cable on IDE channel 1 |
| register "fn_ctrl_lo" = "0" # Enable SB functions |
| register "fn_ctrl_hi" = "0xad" # Enable SB functions |
| register "usb2_termination_set" = "1" |
| register "usb2_termination_a" = "8" |
| register "usb2_termination_b" = "8" |
| register "usb2_termination_c" = "6" |
| register "usb2_termination_d" = "6" |
| register "usb2_termination_e" = "6" |
| register "usb2_termination_f" = "6" |
| register "usb2_termination_g" = "6" |
| register "usb2_termination_h" = "6" |
| register "usb2_dpll_set" = "1" |
| register "usb2_dpll_delay" = "3" |
| register "int_efgh_as_gpio" = "1" |
| register "enable_gpo3" = "1" |
| register "disable_gpo26_gpo27" = "1" |
| register "enable_aol_2_smb_slave" = "1" |
| register "enable_gpo5" = "1" |
| register "gpio15_12_dir_output" = "1" |
| device pci 0.0 on # HT |
| subsystemid 0x1043 0x80a3 |
| end |
| device pci a.0 on # GbE |
| subsystemid 0x1043 0x811a |
| end |
| device pci f.0 on end # SATA |
| device pci f.1 on end # IDE |
| device pci 10.0 on end # USB1 |
| device pci 10.1 on end # USB1 |
| device pci 10.2 on end # USB1 |
| device pci 10.3 on end # USB1 |
| device pci 10.4 on end # USB2 |
| device pci 11.0 on # LPC |
| chip drivers/generic/generic # DIMM 0-0-0 |
| device i2c 50 on end |
| end |
| chip drivers/generic/generic # DIMM 0-0-1 |
| device i2c 51 on end |
| end |
| chip drivers/generic/generic # DIMM 0-1-0 |
| device i2c 52 on end |
| end |
| chip superio/winbond/w83697hf # Super I/O |
| register "hwmon_fan1_divisor" = "128" |
| register "hwmon_fan2_divisor" = "4" |
| device pnp 2e.0 on # Floppy |
| io 0x60 = 0x3f0 |
| irq 0x70 = 6 |
| drq 0x74 = 2 |
| end |
| device pnp 2e.1 on # Parallel port |
| io 0x60 = 0x378 |
| irq 0x70 = 7 |
| drq 0x74 = 3 |
| end |
| device pnp 2e.2 on # Com1 |
| io 0x60 = 0x3f8 |
| irq 0x70 = 4 |
| end |
| device pnp 2e.3 off # Com2 (N/A on this board) |
| end |
| device pnp 2e.6 off # CIR |
| end |
| device pnp 2e.7 off # Game port/GPIO 1 |
| end |
| device pnp 2e.8 off # MIDI/GPIO 5 |
| end |
| device pnp 2e.009 off # GPIO 2 |
| end |
| device pnp 2e.109 off # GPIO 3 |
| end |
| device pnp 2e.209 off # GPIO 4 |
| end |
| device pnp 2e.a off # ACPI |
| end |
| device pnp 2e.b on # Hardware monitor |
| io 0x60 = 0x290 |
| irq 0x70 = 0 |
| irq 0x24 = 0x28 # Global CR24 change bit3: MEMW# Enable |
| end |
| end |
| end |
| device pci 11.5 on # AC97 Audio |
| subsystemid 0x1043 0x80b0 |
| end |
| device pci 11.6 on end # AC97 Modem |
| device pci 12.0 off end # VIA LAN (off, other chip used) |
| end |
| chip southbridge/via/k8t890 # "Southbridge" K8T890 |
| end |
| end |
| device pci 18.1 on end |
| device pci 18.2 on end |
| device pci 18.3 on end |
| end |
| end |
| end |