| chip northbridge/amd/lx |
| device domain 0 on |
| device pci 1.0 on end |
| device pci 1.1 on end |
| chip southbridge/amd/cs5536 |
| # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK |
| # SIRQ Mode = Active(Quiet) mode. Save power.... |
| # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK |
| # How to get these? Boot linux and do this: |
| # rdmsr 0x51400025 |
| register "lpc_serirq_enable" = "0x0000105a" |
| # rdmsr 0x5140004e -- polairy is high 16 bits of low 32 bits |
| register "lpc_serirq_polarity" = "0x0000EFA5" |
| # mode is high 10 bits (determined from code) |
| register "lpc_serirq_mode" = "1" |
| # Don't yet know how to find this. |
| register "enable_gpio_int_route" = "0x0D0C0700" |
| register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash |
| register "enable_USBP4_device" = "0" #0: host, 1:device |
| register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) |
| register "com1_enable" = "0" |
| register "com1_address" = "0x3F8" |
| register "com1_irq" = "4" |
| register "com2_enable" = "0" |
| register "com2_address" = "0x2F8" |
| register "com2_irq" = "3" |
| register "unwanted_vpci[0]" = "0" # End of list has a zero |
| device pci f.0 on # ISA Bridge |
| chip superio/winbond/w83627hf |
| device pnp 2e.0 off # Floppy |
| io 0x60 = 0x3f0 |
| irq 0x70 = 6 |
| drq 0x74 = 2 |
| end |
| device pnp 2e.1 on # Parallel Port |
| io 0x60 = 0x378 |
| irq 0x70 = 7 |
| end |
| device pnp 2e.2 on # Com1 |
| io 0x60 = 0x3f8 |
| irq 0x70 = 4 |
| end |
| device pnp 2e.3 on # Com2 |
| io 0x60 = 0x2f8 |
| irq 0x70 = 3 |
| end |
| device pnp 2e.5 on # Keyboard |
| io 0x60 = 0x60 |
| io 0x62 = 0x64 |
| irq 0x70 = 1 |
| irq 0x72 = 12 |
| end |
| device pnp 2e.6 off # CIR |
| io 0x60 = 0x100 |
| end |
| device pnp 2e.7 off # GAME_MIDI_GIPO1 |
| io 0x60 = 0x220 |
| io 0x62 = 0x300 |
| irq 0x70 = 9 |
| end |
| device pnp 2e.8 on end # GPIO2 |
| device pnp 2e.9 on end # GPIO3 |
| device pnp 2e.a on end # ACPI |
| device pnp 2e.b on # HW Monitor |
| io 0x60 = 0x290 |
| irq 0x70 = 5 |
| end |
| end |
| end |
| device pci f.1 on end # Flash controller |
| device pci f.2 on end # IDE controller |
| device pci f.3 on end # Audio |
| device pci f.4 on end # OHCI |
| device pci f.5 on end # EHCI |
| end |
| end |
| |
| # APIC cluster is late CPU init. |
| device cpu_cluster 0 on |
| chip cpu/amd/geode_lx |
| device lapic 0 on end |
| end |
| end |
| end |