| chip soc/intel/tigerlake |
| register "TcssAuxOri" = "1" |
| register "IomTypeCPortPadCfg[0]" = "0x090E000A" |
| register "IomTypeCPortPadCfg[1]" = "0x090E000D" |
| register "DdiPort1Hpd" = "0" |
| register "DdiPort2Hpd" = "0" |
| |
| device domain 0 on |
| device ref dptf on |
| chip drivers/intel/dptf |
| ## Active Policy |
| register "policies.active" = "{ |
| [0] = {.target = DPTF_CPU, |
| .thresholds = {TEMP_PCT(85, 90), |
| TEMP_PCT(80, 69), |
| TEMP_PCT(75, 56), |
| TEMP_PCT(70, 46), |
| TEMP_PCT(65, 36),}}, |
| [1] = {.target = DPTF_TEMP_SENSOR_0, |
| .thresholds = {TEMP_PCT(53, 90), |
| TEMP_PCT(50, 69), |
| TEMP_PCT(48, 56), |
| TEMP_PCT(45, 46), |
| TEMP_PCT(42, 36),}}, |
| [2] = {.target = DPTF_TEMP_SENSOR_1, |
| .thresholds = {TEMP_PCT(50, 90), |
| TEMP_PCT(47, 69), |
| TEMP_PCT(45, 56), |
| TEMP_PCT(42, 46), |
| TEMP_PCT(39, 36),}}, |
| [3] = {.target = DPTF_TEMP_SENSOR_2, |
| .thresholds = {TEMP_PCT(53, 90), |
| TEMP_PCT(50, 69), |
| TEMP_PCT(48, 56), |
| TEMP_PCT(45, 46), |
| TEMP_PCT(42, 36),}}, |
| [4] = {.target = DPTF_TEMP_SENSOR_3, |
| .thresholds = {TEMP_PCT(53, 90), |
| TEMP_PCT(50, 69), |
| TEMP_PCT(48, 56), |
| TEMP_PCT(45, 46), |
| TEMP_PCT(42, 36),}}}" |
| device generic 0 on end |
| end |
| end # DPTF 0x9A03 |
| device ref ipu on end # IPU 0x9A19 |
| device ref i2c0 on |
| chip drivers/i2c/generic |
| register "hid" = ""10EC5682"" |
| register "name" = ""RT58"" |
| register "desc" = ""Headset Codec"" |
| register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_F8)" |
| # Set the jd_src to RT5668_JD1 for jack detection |
| register "property_count" = "1" |
| register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" |
| register "property_list[0].name" = ""realtek,jd-src"" |
| register "property_list[0].integer" = "1" |
| device i2c 1a on |
| probe AUDIO MAX98357_ALC5682I_I2S |
| probe AUDIO MAX98373_ALC5682I_I2S |
| end |
| end |
| chip drivers/i2c/max98373 |
| register "vmon_slot_no" = "0" |
| register "imon_slot_no" = "1" |
| register "uid" = "0" |
| register "desc" = ""Right Speaker Amp"" |
| register "name" = ""MAXR"" |
| device i2c 31 on |
| probe AUDIO MAX98373_ALC5682I_I2S |
| end |
| end |
| chip drivers/i2c/max98373 |
| register "vmon_slot_no" = "2" |
| register "imon_slot_no" = "3" |
| register "uid" = "1" |
| register "desc" = ""Left Speaker Amp"" |
| register "name" = ""MAXL"" |
| device i2c 32 on |
| probe AUDIO MAX98373_ALC5682I_I2S |
| end |
| end |
| end |
| device ref i2c1 on |
| chip drivers/i2c/hid |
| register "generic.hid" = ""GDIX0000"" |
| register "generic.desc" = ""Goodix Touchscreen"" |
| register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)" |
| register "generic.probed" = "1" |
| register "generic.reset_gpio" = |
| "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)" |
| # Parameter T3 >= 10ms |
| register "generic.reset_delay_ms" = "120" |
| # Parameter T2 >= 1ms |
| register "generic.reset_off_delay_ms" = "3" |
| register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)" |
| # Parameter T1 >= 10ms |
| register "generic.enable_delay_ms" = "12" |
| register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E3)" |
| # Parameter T4 >= 1ms |
| register "generic.stop_off_delay_ms" = "1" |
| register "generic.has_power_resource" = "1" |
| register "hid_desc_reg_offset" = "0x01" |
| device i2c 14 on end |
| end |
| chip drivers/i2c/hid |
| register "generic.hid" = ""ELAN90FC"" |
| register "generic.desc" = ""ELAN Touchscreen"" |
| register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)" |
| register "generic.probed" = "1" |
| register "generic.reset_gpio" = |
| "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)" |
| register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)" |
| register "generic.reset_delay_ms" = "20" |
| register "generic.has_power_resource" = "1" |
| register "generic.disable_gpio_export_in_crs" = "1" |
| register "hid_desc_reg_offset" = "0x01" |
| device i2c 10 on end |
| end |
| chip drivers/generic/gpio_keys |
| register "name" = ""PENH"" |
| # GPP_B3 is the IRQ source, and GPP_E1 is the wake source |
| register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPP_B3)" |
| register "key.wake_gpe" = "GPE0_DW2_01" |
| register "key.wakeup_route" = "WAKEUP_ROUTE_SCI" |
| register "key.wakeup_event_action" = "EV_ACT_DEASSERTED" |
| register "key.dev_name" = ""EJCT"" |
| register "key.linux_code" = "SW_PEN_INSERTED" |
| register "key.linux_input_type" = "EV_SW" |
| register "key.label" = ""pen_eject"" |
| device generic 0 on end |
| end |
| end |
| device ref i2c2 on |
| chip drivers/i2c/sx9310 |
| register "desc" = ""SAR0 Proximity Sensor"" |
| register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)" |
| register "speed" = "I2C_SPEED_FAST" |
| register "uid" = "0" |
| register "reg_prox_ctrl0" = "0x10" |
| register "reg_prox_ctrl1" = "0x00" |
| register "reg_prox_ctrl2" = "0x84" |
| register "reg_prox_ctrl3" = "0x0e" |
| register "reg_prox_ctrl4" = "0x07" |
| register "reg_prox_ctrl5" = "0xc6" |
| register "reg_prox_ctrl6" = "0x20" |
| register "reg_prox_ctrl7" = "0x0d" |
| register "reg_prox_ctrl8" = "0x8d" |
| register "reg_prox_ctrl9" = "0x43" |
| register "reg_prox_ctrl10" = "0x1f" |
| register "reg_prox_ctrl11" = "0x00" |
| register "reg_prox_ctrl12" = "0x00" |
| register "reg_prox_ctrl13" = "0x00" |
| register "reg_prox_ctrl14" = "0x00" |
| register "reg_prox_ctrl15" = "0x00" |
| register "reg_prox_ctrl16" = "0x00" |
| register "reg_prox_ctrl17" = "0x00" |
| register "reg_prox_ctrl18" = "0x00" |
| register "reg_prox_ctrl19" = "0x00" |
| register "reg_sar_ctrl0" = "0x50" |
| register "reg_sar_ctrl1" = "0x8a" |
| register "reg_sar_ctrl2" = "0x3c" |
| device i2c 28 on end |
| end |
| end |
| device ref i2c5 on |
| chip drivers/i2c/generic |
| register "hid" = ""ELAN0000"" |
| register "desc" = ""ELAN Touchpad"" |
| register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E15_IRQ)" |
| register "wake" = "GPE0_DW2_15" |
| register "probed" = "1" |
| device i2c 15 on end |
| end |
| end |
| device ref hda on |
| chip drivers/generic/max98357a |
| register "hid" = ""MX98357A"" |
| register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10)" |
| register "sdmode_delay" = "5" |
| device generic 0 on |
| probe AUDIO MAX98357_ALC5682I_I2S |
| end |
| end |
| chip drivers/intel/soundwire |
| device generic 0 on |
| probe AUDIO MAX98373_ALC5682_SNDW |
| chip drivers/soundwire/alc5682 |
| # SoundWire Link 0 ID 1 |
| register "desc" = ""Headset Codec"" |
| device generic 0.1 on end |
| end |
| chip drivers/soundwire/max98373 |
| # SoundWire Link 1 ID 3 |
| register "desc" = ""Left Speaker Amp"" |
| device generic 1.3 on end |
| end |
| chip drivers/soundwire/max98373 |
| # SoundWire Link 1 ID 7 |
| register "desc" = ""Right Speaker Amp"" |
| device generic 1.7 on end |
| end |
| end |
| end |
| end |
| device ref pmc hidden |
| # The pmc_mux chip driver is a placeholder for the |
| # PMC.MUX device in the ACPI hierarchy. |
| chip drivers/intel/pmc_mux |
| device generic 0 on |
| chip drivers/intel/pmc_mux/conn |
| register "usb2_port_number" = "9" |
| register "usb3_port_number" = "1" |
| # SBU & HSL follow CC |
| device generic 0 on end |
| end |
| chip drivers/intel/pmc_mux/conn |
| register "usb2_port_number" = "4" |
| register "usb3_port_number" = "2" |
| # SBU is fixed, HSL follows CC |
| register "sbu_orientation" = "TYPEC_ORIENTATION_NORMAL" |
| device generic 1 on |
| probe DB_USB USB4_GEN2 |
| probe DB_USB USB3_ACTIVE |
| probe DB_USB USB4_GEN3 |
| probe DB_USB USB3_NO_A |
| end |
| end |
| chip drivers/intel/pmc_mux/conn |
| register "usb2_port_number" = "4" |
| register "usb3_port_number" = "2" |
| # SBU & HSL follow CC |
| device generic 1 on |
| probe DB_USB USB3_PASSIVE |
| end |
| end |
| end |
| end |
| end |
| end |
| end |