| /** @file |
| |
| Copyright (c) 2023, Intel Corporation. All rights reserved.<BR> |
| |
| Redistribution and use in source and binary forms, with or without modification, |
| are permitted provided that the following conditions are met: |
| |
| * Redistributions of source code must retain the above copyright notice, this |
| list of conditions and the following disclaimer. |
| * Redistributions in binary form must reproduce the above copyright notice, this |
| list of conditions and the following disclaimer in the documentation and/or |
| other materials provided with the distribution. |
| * Neither the name of Intel Corporation nor the names of its contributors may |
| be used to endorse or promote products derived from this software without |
| specific prior written permission. |
| |
| THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
| LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF |
| THE POSSIBILITY OF SUCH DAMAGE. |
| |
| This file is automatically generated. Please do NOT modify !!! |
| |
| **/ |
| |
| #ifndef __FSPMUPD_H__ |
| #define __FSPMUPD_H__ |
| |
| #include <FspUpd.h> |
| |
| #pragma pack(1) |
| |
| |
| #include <MemInfoHob.h> |
| |
| /// |
| /// The ChipsetInit Info structure provides the information of ME ChipsetInit CRC and BIOS ChipsetInit CRC. |
| /// |
| typedef struct { |
| UINT8 Revision; ///< Chipset Init Info Revision |
| UINT8 Rsvd[3]; ///< Reserved |
| UINT16 MeChipInitCrc; ///< 16 bit CRC value of MeChipInit Table |
| UINT16 BiosChipInitCrc; ///< 16 bit CRC value of PchChipInit Table |
| } CHIPSET_INIT_INFO; |
| |
| |
| /** Fsp M Configuration |
| **/ |
| typedef struct { |
| |
| /** Offset 0x0040 - Platform Reserved Memory Size |
| The minimum platform memory size required to pass control into DXE |
| **/ |
| UINT64 PlatformMemorySize; |
| |
| /** Offset 0x0048 - SPD Data Length |
| Length of SPD Data |
| 0x100:256 Bytes, 0x200:512 Bytes, 0x400:1024 Bytes |
| **/ |
| UINT16 MemorySpdDataLen; |
| |
| /** Offset 0x004A - Enable above 4GB MMIO resource support |
| Enable/disable above 4GB MMIO resource support |
| $EN_DIS |
| **/ |
| UINT8 EnableAbove4GBMmio; |
| |
| /** Offset 0x004B - Reserved |
| **/ |
| UINT8 Reserved0; |
| |
| /** Offset 0x004C - Memory SPD Pointer Controller 0 Channel 0 Dimm 0 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr000; |
| |
| /** Offset 0x0050 - Memory SPD Pointer Controller 0 Channel 0 Dimm 1 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr001; |
| |
| /** Offset 0x0054 - Memory SPD Pointer Controller 0 Channel 1 Dimm 0 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr010; |
| |
| /** Offset 0x0058 - Memory SPD Pointer Controller 0 Channel 1 Dimm 1 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr011; |
| |
| /** Offset 0x005C - Memory SPD Pointer Controller 0 Channel 2 Dimm 0 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr020; |
| |
| /** Offset 0x0060 - Memory SPD Pointer Controller 0 Channel 2 Dimm 1 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr021; |
| |
| /** Offset 0x0064 - Memory SPD Pointer Controller 0 Channel 3 Dimm 0 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr030; |
| |
| /** Offset 0x0068 - Memory SPD Pointer Controller 0 Channel 3 Dimm 1 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr031; |
| |
| /** Offset 0x006C - Memory SPD Pointer Controller 1 Channel 0 Dimm 0 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr100; |
| |
| /** Offset 0x0070 - Memory SPD Pointer Controller 1 Channel 0 Dimm 1 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr101; |
| |
| /** Offset 0x0074 - Memory SPD Pointer Controller 1 Channel 1 Dimm 0 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr110; |
| |
| /** Offset 0x0078 - Memory SPD Pointer Controller 1 Channel 1 Dimm 1 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr111; |
| |
| /** Offset 0x007C - Memory SPD Pointer Controller 1 Channel 2 Dimm 0 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr120; |
| |
| /** Offset 0x0080 - Memory SPD Pointer Controller 1 Channel 2 Dimm 1 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr121; |
| |
| /** Offset 0x0084 - Memory SPD Pointer Controller 1 Channel 3 Dimm 0 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr130; |
| |
| /** Offset 0x0088 - Memory SPD Pointer Controller 1 Channel 3 Dimm 1 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr131; |
| |
| /** Offset 0x008C - RcompResistor settings |
| Indicates RcompResistor settings: Board-dependent |
| **/ |
| UINT16 RcompResistor; |
| |
| /** Offset 0x008E - RcompTarget settings |
| RcompTarget settings: board-dependent |
| **/ |
| UINT16 RcompTarget[5]; |
| |
| /** Offset 0x0098 - Dqs Map CPU to DRAM MC 0 CH 0 |
| Set Dqs mapping relationship between CPU and DRAM, Channel 0: board-dependent |
| **/ |
| UINT8 DqsMapCpu2DramMc0Ch0[2]; |
| |
| /** Offset 0x009A - Dqs Map CPU to DRAM MC 0 CH 1 |
| Set Dqs mapping relationship between CPU and DRAM, Channel 1: board-dependent |
| **/ |
| UINT8 DqsMapCpu2DramMc0Ch1[2]; |
| |
| /** Offset 0x009C - Dqs Map CPU to DRAM MC 0 CH 2 |
| Set Dqs mapping relationship between CPU and DRAM, Channel 2: board-dependent |
| **/ |
| UINT8 DqsMapCpu2DramMc0Ch2[2]; |
| |
| /** Offset 0x009E - Dqs Map CPU to DRAM MC 0 CH 3 |
| Set Dqs mapping relationship between CPU and DRAM, Channel 3: board-dependent |
| **/ |
| UINT8 DqsMapCpu2DramMc0Ch3[2]; |
| |
| /** Offset 0x00A0 - Dqs Map CPU to DRAM MC 1 CH 0 |
| Set Dqs mapping relationship between CPU and DRAM, Channel 0: board-dependent |
| **/ |
| UINT8 DqsMapCpu2DramMc1Ch0[2]; |
| |
| /** Offset 0x00A2 - Dqs Map CPU to DRAM MC 1 CH 1 |
| Set Dqs mapping relationship between CPU and DRAM, Channel 1: board-dependent |
| **/ |
| UINT8 DqsMapCpu2DramMc1Ch1[2]; |
| |
| /** Offset 0x00A4 - Dqs Map CPU to DRAM MC 1 CH 2 |
| Set Dqs mapping relationship between CPU and DRAM, Channel 2: board-dependent |
| **/ |
| UINT8 DqsMapCpu2DramMc1Ch2[2]; |
| |
| /** Offset 0x00A6 - Dqs Map CPU to DRAM MC 1 CH 3 |
| Set Dqs mapping relationship between CPU and DRAM, Channel 3: board-dependent |
| **/ |
| UINT8 DqsMapCpu2DramMc1Ch3[2]; |
| |
| /** Offset 0x00A8 - Dq Map CPU to DRAM MC 0 CH 0 |
| Set Dq mapping relationship between CPU and DRAM, Channel 0: board-dependent |
| **/ |
| UINT8 DqMapCpu2DramMc0Ch0[16]; |
| |
| /** Offset 0x00B8 - Dq Map CPU to DRAM MC 0 CH 1 |
| Set Dq mapping relationship between CPU and DRAM, Channel 1: board-dependent |
| **/ |
| UINT8 DqMapCpu2DramMc0Ch1[16]; |
| |
| /** Offset 0x00C8 - Dq Map CPU to DRAM MC 0 CH 2 |
| Set Dq mapping relationship between CPU and DRAM, Channel 2: board-dependent |
| **/ |
| UINT8 DqMapCpu2DramMc0Ch2[16]; |
| |
| /** Offset 0x00D8 - Dq Map CPU to DRAM MC 0 CH 3 |
| Set Dq mapping relationship between CPU and DRAM, Channel 3: board-dependent |
| **/ |
| UINT8 DqMapCpu2DramMc0Ch3[16]; |
| |
| /** Offset 0x00E8 - Dq Map CPU to DRAM MC 1 CH 0 |
| Set Dq mapping relationship between CPU and DRAM, Channel 0: board-dependent |
| **/ |
| UINT8 DqMapCpu2DramMc1Ch0[16]; |
| |
| /** Offset 0x00F8 - Dq Map CPU to DRAM MC 1 CH 1 |
| Set Dq mapping relationship between CPU and DRAM, Channel 1: board-dependent |
| **/ |
| UINT8 DqMapCpu2DramMc1Ch1[16]; |
| |
| /** Offset 0x0108 - Dq Map CPU to DRAM MC 1 CH 2 |
| Set Dq mapping relationship between CPU and DRAM, Channel 2: board-dependent |
| **/ |
| UINT8 DqMapCpu2DramMc1Ch2[16]; |
| |
| /** Offset 0x0118 - Dq Map CPU to DRAM MC 1 CH 3 |
| Set Dq mapping relationship between CPU and DRAM, Channel 3: board-dependent |
| **/ |
| UINT8 DqMapCpu2DramMc1Ch3[16]; |
| |
| /** Offset 0x0128 - Dqs Pins Interleaved Setting |
| Indicates DqPinsInterleaved setting: board-dependent |
| $EN_DIS |
| **/ |
| UINT8 DqPinsInterleaved; |
| |
| /** Offset 0x0129 - Smram Mask |
| The SMM Regions AB-SEG and/or H-SEG reserved |
| 0: Neither, 1:AB-SEG, 2:H-SEG, 3: Both |
| **/ |
| UINT8 SmramMask; |
| |
| /** Offset 0x012A - MRC Fast Boot |
| Enables/Disable the MRC fast path thru the MRC |
| $EN_DIS |
| **/ |
| UINT8 MrcFastBoot; |
| |
| /** Offset 0x012B - Rank Margin Tool per Task |
| This option enables the user to execute Rank Margin Tool per major training step |
| in the MRC. |
| $EN_DIS |
| **/ |
| UINT8 RmtPerTask; |
| |
| /** Offset 0x012C - Training Trace |
| This option enables the trained state tracing feature in MRC. This feature will |
| print out the key training parameters state across major training steps. |
| $EN_DIS |
| **/ |
| UINT8 TrainTrace; |
| |
| /** Offset 0x012D - Reserved |
| **/ |
| UINT8 Reserved1[3]; |
| |
| /** Offset 0x0130 - Tseg Size |
| Size of SMRAM memory reserved. 0x400000 for Release build and 0x1000000 for Debug build |
| 0x0400000:4MB, 0x01000000:16MB |
| **/ |
| UINT32 TsegSize; |
| |
| /** Offset 0x0134 - MMIO Size |
| Size of MMIO space reserved for devices. 0(Default)=Auto, non-Zero=size in MB |
| **/ |
| UINT16 MmioSize; |
| |
| /** Offset 0x0136 - Probeless Trace |
| Probeless Trace: 0=Disabled, 1=Enable. Enabling Probeless Trace will reserve 128MB. |
| This also requires IED to be enabled. |
| $EN_DIS |
| **/ |
| UINT8 ProbelessTrace; |
| |
| /** Offset 0x0137 - Enable SMBus |
| Enable/disable SMBus controller. |
| $EN_DIS |
| **/ |
| UINT8 SmbusEnable; |
| |
| /** Offset 0x0138 - Spd Address Tabl |
| Specify SPD Address table for CH0D0/CH0D1/CH1D0&CH1D1. MemorySpdPtr will be used |
| if SPD Address is 00 |
| **/ |
| UINT8 SpdAddressTable[16]; |
| |
| /** Offset 0x0148 - Platform Debug Consent |
| Enabled Trace active: TraceHub is enabled and trace is active, blocks s0ix.\n |
| \n |
| Enabled Trace ready: TraceHub is enabled and allowed S0ix.\n |
| \n |
| Enabled Trace power off: TraceHub is powergated, provide setting close to functional |
| low power state\n |
| \n |
| Manual: user needs to configure Advanced Debug Settings manually, aimed at advanced users |
| 0:Disabled, 2:Enabled Trace Active, 4:Enabled Trace Ready, 6:Enable Trace Power-Off, 7:Manual |
| **/ |
| UINT8 PlatformDebugOption; |
| |
| /** Offset 0x0149 - DCI Enable |
| Determine if to enable DCI debug from host |
| $EN_DIS |
| **/ |
| UINT8 DciEn; |
| |
| /** Offset 0x014A - Reserved |
| **/ |
| UINT8 Reserved2; |
| |
| /** Offset 0x014B - DCI DbC Mode |
| Disabled: Clear both USB2/3DBCEN; USB2: set USB2DBCEN; USB3: set USB3DBCEN; Both: |
| Set both USB2/3DBCEN; No Change: Comply with HW value |
| 0:Disabled, 1:USB2 DbC, 2:USB3 DbC, 3:Both, 4:No Change |
| **/ |
| UINT8 DciDbcMode; |
| |
| /** Offset 0x014C - USB3 Type-C UFP2DFP Kernel/Platform Debug Support |
| This BIOS option enables kernel and platform debug for USB3 interface over a UFP |
| Type-C receptacle, select 'No Change' will do nothing to UFP2DFP setting. |
| 0:Disabled, 1:Enabled, 2:No Change |
| **/ |
| UINT8 DciUsb3TypecUfpDbg; |
| |
| /** Offset 0x014D - SOC Trace Hub Mode |
| Enable/Disable SOC TraceHub |
| $EN_DIS |
| **/ |
| UINT8 SocTraceHubMode; |
| |
| /** Offset 0x014E - SOC Trace Hub Memory Region 0 buffer Size |
| Select size of memory region 0 buffer. Memory allocated by BIOS only applies to |
| ITH tool running on the host. For ITH tool running on the target, choose None/OS, |
| memory shall be allocated by tool. User should be cautious to choose the amount |
| of memory. If chosen size is larger than half of system memory, setup will automatically |
| rollback to default value. |
| 0x00:1MB, 0x03:8MB, 0x06:64MB, 0x07:128MB, 0x08:256MB, 0x09:512MB, 0x0A:1GB, 0x0B:2GB, |
| 0x0C:4GB, 0x0D:8GB, 0x0E:0MB |
| **/ |
| UINT16 SocTraceHubMemReg0Size; |
| |
| /** Offset 0x0150 - SOC Trace Hub Memory Region 1 buffer Size |
| Select size of memory region 1 buffer. Memory allocated by BIOS only applies to |
| ITH tool running on the host. For ITH tool running on the target, choose None/OS, |
| memory shall be allocated by tool. User should be cautious to choose the amount |
| of memory. If chosen size is larger than half of system memory, setup will automatically |
| rollback to default value. |
| 0x00:1MB, 0x03:8MB, 0x06:64MB, 0x07:128MB, 0x08:256MB, 0x09:512MB, 0x0A:1GB, 0x0B:2GB, |
| 0x0C:4GB, 0x0D:8GB, 0x0E:0MB |
| **/ |
| UINT16 SocTraceHubMemReg1Size; |
| |
| /** Offset 0x0152 - Reserved |
| **/ |
| UINT8 Reserved3; |
| |
| /** Offset 0x0153 - PCH Trace Hub Mode |
| Enable/Disable PCH TraceHub |
| $EN_DIS |
| **/ |
| UINT8 PchTraceHubMode; |
| |
| /** Offset 0x0154 - PCH Trace Hub Memory Region 0 buffer Size |
| Select size of memory region 0 buffer. Memory allocated by BIOS only applies to |
| ITH tool running on the host. For ITH tool running on the target, choose None/OS, |
| memory shall be allocated by tool. User should be cautious to choose the amount |
| of memory. If chosen size is larger than half of system memory, setup will automatically |
| rollback to default value. |
| 0x00:1MB, 0x03:8MB, 0x06:64MB, 0x07:128MB, 0x08:256MB, 0x09:512MB, 0x0A:1GB, 0x0B:2GB, |
| 0x0C:4GB, 0x0D:8GB, 0x0E:0MB |
| **/ |
| UINT16 PchTraceHubMemReg0Size; |
| |
| /** Offset 0x0156 - PCH Trace Hub Memory Region 1 buffer Size |
| Select size of memory region 1 buffer. Memory allocated by BIOS only applies to |
| ITH tool running on the host. For ITH tool running on the target, choose None/OS, |
| memory shall be allocated by tool. User should be cautious to choose the amount |
| of memory. If chosen size is larger than half of system memory, setup will automatically |
| rollback to default value. |
| 0x00:1MB, 0x03:8MB, 0x06:64MB, 0x07:128MB, 0x08:256MB, 0x09:512MB, 0x0A:1GB, 0x0B:2GB, |
| 0x0C:4GB, 0x0D:8GB, 0x0E:0MB |
| **/ |
| UINT16 PchTraceHubMemReg1Size; |
| |
| /** Offset 0x0158 - Reserved |
| **/ |
| UINT8 Reserved4[4]; |
| |
| /** Offset 0x015C - HD Audio DMIC Link Clock Select |
| Determines DMIC<N> Clock Source. 0: Both, 1: ClkA, 2: ClkB |
| 0: Both, 1: ClkA, 2: ClkB |
| **/ |
| UINT8 PchHdaAudioLinkDmicClockSelect[2]; |
| |
| /** Offset 0x015E - State of X2APIC_OPT_OUT bit in the DMAR table |
| 0=Disable/Clear, 1=Enable/Set |
| $EN_DIS |
| **/ |
| UINT8 X2ApicOptOut; |
| |
| /** Offset 0x015F - State of DMA_CONTROL_GUARANTEE bit in the DMAR table |
| 0=Disable/Clear, 1=Enable/Set |
| $EN_DIS |
| **/ |
| UINT8 DmaControlGuarantee; |
| |
| /** Offset 0x0160 - Base addresses for VT-d function MMIO access |
| Base addresses for VT-d MMIO access per VT-d engine |
| **/ |
| UINT32 VtdBaseAddress[9]; |
| |
| /** Offset 0x0184 - Disable VT-d |
| 0=Enable/FALSE(VT-d enabled), 1=Disable/TRUE (VT-d disabled) |
| $EN_DIS |
| **/ |
| UINT8 VtdDisable; |
| |
| /** Offset 0x0185 - Vtd Programming for Igd |
| 1=Enable/TRUE (Igd VT-d Bar programming enabled), 0=Disable/FLASE (Igd VT-d Bar |
| programming disabled) |
| $EN_DIS |
| **/ |
| UINT8 VtdIgdEnable; |
| |
| /** Offset 0x0186 - Vtd Programming for Iop |
| 1=Enable/TRUE (Iop VT-d Bar programming enabled), 0=Disable/FLASE (Iop VT-d Bar |
| programming disabled) |
| $EN_DIS |
| **/ |
| UINT8 VtdIopEnable; |
| |
| /** Offset 0x0187 - Internal Graphics Pre-allocated Memory |
| Size of memory preallocated for internal graphics. |
| 0x00:0MB, 0x01:32MB, 0x02:64MB, 0x03:96MB, 0x04:128MB, 0xF0:4MB, 0xF1:8MB, 0xF2:12MB, |
| 0xF3:16MB, 0xF4:20MB, 0xF5:24MB, 0xF6:28MB, 0xF7:32MB, 0xF8:36MB, 0xF9:40MB, 0xFA:44MB, |
| 0xFB:48MB, 0xFC:52MB, 0xFD:56MB, 0xFE:60MB |
| **/ |
| UINT8 IgdDvmt50PreAlloc; |
| |
| /** Offset 0x0188 - Internal Graphics |
| Enable/disable internal graphics. |
| $EN_DIS |
| **/ |
| UINT8 InternalGfx; |
| |
| /** Offset 0x0189 - Reserved |
| **/ |
| UINT8 Reserved5; |
| |
| /** Offset 0x018A - Board Type |
| MrcBoardType, Options are 0=Mobile/Mobile Halo, 1=Desktop/DT Halo, 5=ULT/ULX/Mobile |
| Halo, 7=UP Server |
| 0:Mobile/Mobile Halo, 1:Desktop/DT Halo, 5:ULT/ULX/Mobile Halo, 7:UP Server |
| **/ |
| UINT8 UserBd; |
| |
| /** Offset 0x018B - Reserved |
| **/ |
| UINT8 Reserved6; |
| |
| /** Offset 0x018C - DDR Frequency Limit |
| Maximum Memory Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, |
| 2133, 2400, 2667, 2933 and 0 for Auto. |
| 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto |
| **/ |
| UINT16 DdrFreqLimit; |
| |
| /** Offset 0x018E - SAGV |
| System Agent dynamic frequency support. |
| 0:Disabled, 1:Enabled |
| **/ |
| UINT8 SaGv; |
| |
| /** Offset 0x018F - Reserved |
| **/ |
| UINT8 Reserved7; |
| |
| /** Offset 0x0190 - Memory Test on Warm Boot |
| Run Base Memory Test on Warm Boot |
| 0:Disable, 1:Enable |
| **/ |
| UINT8 MemTestOnWarmBoot; |
| |
| /** Offset 0x0191 - DDR Speed Control |
| DDR Frequency and Gear control for all SAGV points. |
| 0:Auto, 1:Manual |
| **/ |
| UINT8 DdrSpeedControl; |
| |
| /** Offset 0x0192 - Controller 0 Channel 0 DIMM Control |
| Enable / Disable DIMMs on Controller 0 Channel 0 |
| $EN_DIS |
| **/ |
| UINT8 DisableMc0Ch0; |
| |
| /** Offset 0x0193 - Controller 0 Channel 1 DIMM Control |
| Enable / Disable DIMMs on Controller 0 Channel 1 |
| $EN_DIS |
| **/ |
| UINT8 DisableMc0Ch1; |
| |
| /** Offset 0x0194 - Controller 0 Channel 2 DIMM Control |
| Enable / Disable DIMMs on Controller 0 Channel 2 |
| $EN_DIS |
| **/ |
| UINT8 DisableMc0Ch2; |
| |
| /** Offset 0x0195 - Controller 0 Channel 3 DIMM Control |
| Enable / Disable DIMMs on Controller 0 Channel 3 |
| $EN_DIS |
| **/ |
| UINT8 DisableMc0Ch3; |
| |
| /** Offset 0x0196 - Controller 1 Channel 0 DIMM Control |
| Enable / Disable DIMMs on Controller 1 Channel 0 |
| $EN_DIS |
| **/ |
| UINT8 DisableMc1Ch0; |
| |
| /** Offset 0x0197 - Controller 1 Channel 1 DIMM Control |
| Enable / Disable DIMMs on Controller 1 Channel 1 |
| $EN_DIS |
| **/ |
| UINT8 DisableMc1Ch1; |
| |
| /** Offset 0x0198 - Controller 1 Channel 2 DIMM Control |
| Enable / Disable DIMMs on Controller 1 Channel 2 |
| $EN_DIS |
| **/ |
| UINT8 DisableMc1Ch2; |
| |
| /** Offset 0x0199 - Controller 1 Channel 3 DIMM Control |
| Enable / Disable DIMMs on Controller 1 Channel 3 |
| $EN_DIS |
| **/ |
| UINT8 DisableMc1Ch3; |
| |
| /** Offset 0x019A - Scrambler Support |
| This option enables data scrambling in memory. |
| $EN_DIS |
| **/ |
| UINT8 ScramblerSupport; |
| |
| /** Offset 0x019B - SPD Profile Selected |
| Select DIMM timing profile. Options are 0:Default SPD Profile, 1:Custom Profile, |
| 2:XMP Profile 1, 3:XMP Profile 2, 4:XMP Profile 3, 5:XMP User Profile 4, 6:XMP |
| User Profile 5 |
| 0:Default SPD Profile, 1:Custom Profile, 2:XMP Profile 1, 3:XMP Profile 2, 4:XMP |
| Profile 3, 5:XMP User Profile 4, 6:XMP User Profile 5 |
| **/ |
| UINT8 SpdProfileSelected; |
| |
| /** Offset 0x019C - Reserved |
| **/ |
| UINT8 Reserved8[102]; |
| |
| /** Offset 0x0202 - Memory Reference Clock |
| 100MHz, 133MHz. |
| 0:133MHz, 1:100MHz |
| **/ |
| UINT8 RefClk; |
| |
| /** Offset 0x0203 - Reserved |
| **/ |
| UINT8 Reserved9[9]; |
| |
| /** Offset 0x020C - Memory Vdd Voltage |
| DRAM voltage (Vdd) (supply voltage for input buffers and core logic of the DRAM |
| chips) in millivolts. <b>0=Platform Default (no override)</b>, 1200=1.2V, 1350=1.35V etc. |
| 0:Default, 1200:1.20 Volts, 1250:1.25 Volts, 1300:1.30 Volts, 1350:1.35 Volts, 1400:1.40 |
| Volts, 1450:1.45 Volts, 1500:1.50 Volts, 1550:1.55 Volts, 1600:1.60 Volts, 1650:1.65 Volts |
| **/ |
| UINT16 VddVoltage; |
| |
| /** Offset 0x020E - Reserved |
| **/ |
| UINT8 Reserved10[4]; |
| |
| /** Offset 0x0212 - Memory Ratio |
| Automatic or the frequency will equal ratio times reference clock. Set to Auto to |
| recalculate memory timings listed below. |
| 0:Auto, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12, 13:13, 14:14, 15:15 |
| **/ |
| UINT16 Ratio; |
| |
| /** Offset 0x0214 - tCL |
| CAS Latency, 0: AUTO, max: 255. Only used if FspmUpd->FspmConfig.SpdProfileSelected |
| == 1 (Custom Profile). |
| **/ |
| UINT8 tCL; |
| |
| /** Offset 0x0215 - tCWL |
| Min CAS Write Latency Delay Time, 0: AUTO, max: 255. Only used if FspmUpd->FspmConfig.SpdProfileSelected |
| == 1 (Custom Profile). |
| **/ |
| UINT8 tCWL; |
| |
| /** Offset 0x0216 - tFAW |
| Min Four Activate Window Delay Time, 0: AUTO, max: 65535. Only used if FspmUpd->FspmConfig.SpdProfileSelected |
| == 1 (Custom Profile). |
| **/ |
| UINT16 tFAW; |
| |
| /** Offset 0x0218 - tRAS |
| RAS Active Time, 0: AUTO, max: 65535. Only used if FspmUpd->FspmConfig.SpdProfileSelected |
| == 1 (Custom Profile). |
| **/ |
| UINT16 tRAS; |
| |
| /** Offset 0x021A - tRCD/tRP |
| RAS to CAS delay time and Row Precharge delay time, 0: AUTO, max: 255. Only used |
| if FspmUpd->FspmConfig.SpdProfileSelected == 1 (Custom Profile). |
| **/ |
| UINT8 tRCDtRP; |
| |
| /** Offset 0x021B - Reserved |
| **/ |
| UINT8 Reserved11; |
| |
| /** Offset 0x021C - tREFI |
| Refresh Interval, 0: AUTO, max: 65535. Only used if FspmUpd->FspmConfig.SpdProfileSelected |
| == 1 (Custom Profile). |
| **/ |
| UINT16 tREFI; |
| |
| /** Offset 0x021E - tRFC |
| Min Refresh Recovery Delay Time, 0: AUTO, max: 65535. Only used if FspmUpd->FspmConfig.SpdProfileSelected |
| == 1 (Custom Profile). |
| **/ |
| UINT16 tRFC; |
| |
| /** Offset 0x0220 - tRRD |
| Min Row Active to Row Active Delay Time, 0: AUTO, max: 255. Only used if FspmUpd->FspmConfig.SpdProfileSelected |
| == 1 (Custom Profile). |
| **/ |
| UINT8 tRRD; |
| |
| /** Offset 0x0221 - tRTP |
| Min Internal Read to Precharge Command Delay Time, 0: AUTO, max: 255. Only used |
| if FspmUpd->FspmConfig.SpdProfileSelected == 1 (Custom Profile). |
| **/ |
| UINT8 tRTP; |
| |
| /** Offset 0x0222 - tWR |
| Min Write Recovery Time, 0: AUTO, legal values: 5, 6, 7, 8, 10, 12, 14, 16, 18, |
| 20, 24, 30, 34, 40. Only used if FspmUpd->FspmConfig.SpdProfileSelected == 1 (Custom Profile). |
| 0:Auto, 5:5, 6:6, 7:7, 8:8, 10:10, 12:12, 14:14, 16:16, 18:18, 20:20, 24:24, 30:30, |
| 34:34, 40:40 |
| **/ |
| UINT8 tWR; |
| |
| /** Offset 0x0223 - tWTR |
| Min Internal Write to Read Command Delay Time, 0: AUTO, max: 255. Only used if FspmUpd->FspmConfig.SpdProfileSelected |
| == 1 (Custom Profile). |
| **/ |
| UINT8 tWTR; |
| |
| /** Offset 0x0224 - Reserved |
| **/ |
| UINT8 Reserved12[12]; |
| |
| /** Offset 0x0230 - NMode |
| System command rate, range 0-2, 0 means auto, 1 = 1N, 2 = 2N |
| **/ |
| UINT8 NModeSupport; |
| |
| /** Offset 0x0231 - Enable Intel HD Audio (Azalia) |
| 0: Disable, 1: Enable (Default) Azalia controller |
| $EN_DIS |
| **/ |
| UINT8 PchHdaEnable; |
| |
| /** Offset 0x0232 - Enable PCH ISH Controller |
| 0: Disable, 1: Enable (Default) ISH Controller |
| $EN_DIS |
| **/ |
| UINT8 PchIshEnable; |
| |
| /** Offset 0x0233 - Reserved |
| **/ |
| UINT8 Reserved13[7]; |
| |
| /** Offset 0x023A - SAGV Gear Ratio |
| Gear Selection for SAGV points. 0 - Auto, 2-Gear 2, 4-Gear 4 |
| **/ |
| UINT8 SaGvGear[4]; |
| |
| /** Offset 0x023E - SAGV Frequency |
| SAGV Frequency per point in Mhz. 0 for Auto and a ratio of 133/100MHz: 1333/1300. |
| **/ |
| UINT16 SaGvFreq[4]; |
| |
| /** Offset 0x0246 - SAGV Disabled Gear Ratio |
| Gear Selection for SAGV Disabled. 0 - Auto, 2-Gear 2, 2-Gear 4 |
| **/ |
| UINT8 GearRatio; |
| |
| /** Offset 0x0247 - Reserved |
| **/ |
| UINT8 Reserved14[69]; |
| |
| /** Offset 0x028C - MMIO size adjustment for AUTO mode |
| Positive number means increasing MMIO size, Negative value means decreasing MMIO |
| size: 0 (Default)=no change to AUTO mode MMIO size |
| **/ |
| UINT16 MmioSizeAdjustment; |
| |
| /** Offset 0x028E - Selection of the primary display device |
| 0=iGFX, 3(Default)=AUTO, 4=Hybrid Graphics |
| 0:iGFX, 3:AUTO, 4:Hybrid Graphics |
| **/ |
| UINT8 PrimaryDisplay; |
| |
| /** Offset 0x028F - Reserved |
| **/ |
| UINT8 Reserved15; |
| |
| /** Offset 0x0290 - Temporary MMIO address for GMADR |
| Obsolete field now and it has been extended to 64 bit address, used LMemBar |
| **/ |
| UINT32 GmAdr; |
| |
| /** Offset 0x0294 - Temporary MMIO address for GTTMMADR |
| The reference code will use this as Temporary MMIO address space to access GTTMMADR |
| Registers.Platform should provide conflict free Temporary MMIO Range: GttMmAdr |
| to (GttMmAdr + 2MB MMIO + 6MB Reserved + GttSize). Default is (GmAdr - (2MB MMIO |
| + 6MB Reserved + GttSize)) to (GmAdr - 0x1) (Where GttSize = 8MB) |
| **/ |
| UINT32 GttMmAdr; |
| |
| /** Offset 0x0298 - Enable/Disable MRC TXT dependency |
| When enabled MRC execution will wait for TXT initialization to be done first. Disabled(0x0)(Default): |
| MRC will not wait for TXT initialization, Enabled(0x1): MRC will wait for TXT initialization |
| $EN_DIS |
| **/ |
| UINT8 TxtImplemented; |
| |
| /** Offset 0x0299 - Enable/Disable SA OcSupport |
| Enable: Enable SA OcSupport, Disable(Default): Disable SA OcSupport |
| $EN_DIS |
| **/ |
| UINT8 SaOcSupport; |
| |
| /** Offset 0x029A - GT slice Voltage Mode |
| 0(Default): Adaptive, 1: Override |
| 0: Adaptive, 1: Override |
| **/ |
| UINT8 GtVoltageMode; |
| |
| /** Offset 0x029B - Maximum GTs turbo ratio override |
| 0(Default)=Minimal/Auto, 60=Maximum |
| **/ |
| UINT8 GtMaxOcRatio; |
| |
| /** Offset 0x029C - The voltage offset applied to GT slice |
| 0(Default)=Minimal, 1000=Maximum |
| **/ |
| UINT16 GtVoltageOffset; |
| |
| /** Offset 0x029E - The GT slice voltage override which is applied to the entire range of GT frequencies |
| 0(Default)=Minimal, 2000=Maximum |
| **/ |
| UINT16 GtVoltageOverride; |
| |
| /** Offset 0x02A0 - adaptive voltage applied during turbo frequencies |
| 0(Default)=Minimal, 2000=Maximum |
| **/ |
| UINT16 GtAdaptiveVoltage; |
| |
| /** Offset 0x02A2 - voltage offset applied to the SA |
| 0(Default)=Minimal, 1000=Maximum |
| **/ |
| UINT16 SaVoltageOffset; |
| |
| /** Offset 0x02A4 - PCIe root port Function number for Hybrid Graphics dGPU |
| Root port Index number to indicate which PCIe root port has dGPU |
| **/ |
| UINT8 RootPortIndex; |
| |
| /** Offset 0x02A5 - Realtime Memory Timing |
| 0(Default): Disabled, 1: Enabled. When enabled, it will allow the system to perform |
| realtime memory timing changes after MRC_DONE. |
| 0: Disabled, 1: Enabled |
| **/ |
| UINT8 RealtimeMemoryTiming; |
| |
| /** Offset 0x02A6 - Reserved |
| **/ |
| UINT8 Reserved16; |
| |
| /** Offset 0x02A7 - Enable/Disable SA IPU |
| Enable(Default): Enable SA IPU, Disable: Disable SA IPU |
| $EN_DIS |
| **/ |
| UINT8 SaIpuEnable; |
| |
| /** Offset 0x02A8 - IMGU CLKOUT Configuration |
| The configuration of IMGU CLKOUT, 0: Disable;<b>1: Enable</b>. |
| $EN_DIS |
| **/ |
| UINT8 ImguClkOutEn[6]; |
| |
| /** Offset 0x02AE - Program GPIOs for LFP on DDI port-A device |
| 0=Disabled,1(Default)=eDP, 2=MIPI DSI |
| 0:Disabled, 1:eDP, 2:MIPI DSI |
| **/ |
| UINT8 DdiPortAConfig; |
| |
| /** Offset 0x02AF - Program GPIOs for LFP on DDI port-B device |
| 0(Default)=Disabled,1=eDP, 2=MIPI DSI |
| 0:Disabled, 1:eDP, 2:MIPI DSI |
| **/ |
| UINT8 DdiPortBConfig; |
| |
| /** Offset 0x02B0 - Enable or disable HPD of DDI port A |
| 0(Default)=Disable, 1=Enable |
| $EN_DIS |
| **/ |
| UINT8 DdiPortAHpd; |
| |
| /** Offset 0x02B1 - Enable or disable HPD of DDI port B |
| 0=Disable, 1(Default)=Enable |
| $EN_DIS |
| **/ |
| UINT8 DdiPortBHpd; |
| |
| /** Offset 0x02B2 - Enable or disable HPD of DDI port C |
| 0(Default)=Disable, 1=Enable |
| $EN_DIS |
| **/ |
| UINT8 DdiPortCHpd; |
| |
| /** Offset 0x02B3 - Enable or disable HPD of DDI port 1 |
| 0=Disable, 1(Default)=Enable |
| $EN_DIS |
| **/ |
| UINT8 DdiPort1Hpd; |
| |
| /** Offset 0x02B4 - Enable or disable HPD of DDI port 2 |
| 0(Default)=Disable, 1=Enable |
| $EN_DIS |
| **/ |
| UINT8 DdiPort2Hpd; |
| |
| /** Offset 0x02B5 - Enable or disable HPD of DDI port 3 |
| 0(Default)=Disable, 1=Enable |
| $EN_DIS |
| **/ |
| UINT8 DdiPort3Hpd; |
| |
| /** Offset 0x02B6 - Enable or disable HPD of DDI port 4 |
| 0(Default)=Disable, 1=Enable |
| $EN_DIS |
| **/ |
| UINT8 DdiPort4Hpd; |
| |
| /** Offset 0x02B7 - Enable or disable DDC of DDI port A |
| 0(Default)=Disable, 1=Enable |
| $EN_DIS |
| **/ |
| UINT8 DdiPortADdc; |
| |
| /** Offset 0x02B8 - Enable or disable DDC of DDI port B |
| 0=Disable, 1(Default)=Enable |
| $EN_DIS |
| **/ |
| UINT8 DdiPortBDdc; |
| |
| /** Offset 0x02B9 - Enable or disable DDC of DDI port C |
| 0(Default)=Disable, 1=Enable |
| $EN_DIS |
| **/ |
| UINT8 DdiPortCDdc; |
| |
| /** Offset 0x02BA - Enable DDC setting of DDI Port 1 |
| 0(Default)=Disable, 1=Enable |
| $EN_DIS |
| **/ |
| UINT8 DdiPort1Ddc; |
| |
| /** Offset 0x02BB - Enable DDC setting of DDI Port 2 |
| 0(Default)=Disable, 1=Enable |
| $EN_DIS |
| **/ |
| UINT8 DdiPort2Ddc; |
| |
| /** Offset 0x02BC - Enable DDC setting of DDI Port 3 |
| 0(Default)=Disable, 1=Enable |
| $EN_DIS |
| **/ |
| UINT8 DdiPort3Ddc; |
| |
| /** Offset 0x02BD - Enable DDC setting of DDI Port 4 |
| 0(Default)=Disable, 1=Enable |
| $EN_DIS |
| **/ |
| UINT8 DdiPort4Ddc; |
| |
| /** Offset 0x02BE - Reserved |
| **/ |
| UINT8 Reserved17[18]; |
| |
| /** Offset 0x02D0 - Per-core HT Disable |
| Defines the per-core HT disable mask where: 1 - Disable selected logical core HT, |
| 0 - is ignored. Input is in HEX and each bit maps to a logical core. Ex. A value |
| of '1F' would disable HT for cores 4,3,2,1 and 0. Default is 0, all cores have |
| HT enabled. Range is 0 - 0x7F for max 8 cores. You can only disable up to MAX_CORE_COUNT - 1. |
| **/ |
| UINT16 PerCoreHtDisable; |
| |
| /** Offset 0x02D2 - Reserved |
| **/ |
| UINT8 Reserved18[6]; |
| |
| /** Offset 0x02D8 - Thermal Velocity Boost Ratio clipping |
| 0: Disabled, 1(Default): Enabled. This service controls Core frequency reduction |
| caused by high package temperatures for processors that implement the Intel Thermal |
| Velocity Boost (TVB) feature |
| $EN_DIS |
| **/ |
| UINT8 TvbRatioClipping; |
| |
| /** Offset 0x02D9 - Thermal Velocity Boost voltage optimization |
| 0: Disabled, 1: Enabled(Default). This service controls thermal based voltage optimizations |
| for processors that implement the Intel Thermal Velocity Boost (TVB) feature. |
| $EN_DIS |
| **/ |
| UINT8 TvbVoltageOptimization; |
| |
| /** Offset 0x02DA - Reserved |
| **/ |
| UINT8 Reserved19[45]; |
| |
| /** Offset 0x0307 - DMI Max Link Speed |
| Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 |
| Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed |
| 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 |
| **/ |
| UINT8 DmiMaxLinkSpeed; |
| |
| /** Offset 0x0308 - PCH DMI Equalization Phase 2 |
| DMI Equalization Phase 2. (0x0): Disable phase 2, (0x1): Enable phase 2, (0x2)(Default): |
| AUTO - Use the current default method |
| 0:Disable phase2, 1:Enable phase2, 2:Auto |
| **/ |
| UINT8 PchDmiGen3EqPh2Enable; |
| |
| /** Offset 0x0309 - PCH DMI Gen3 Equalization Phase3 |
| DMI Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, |
| HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software |
| Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static |
| EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just |
| Phase1), Disabled(0x4): Bypass Equalization Phase 3 |
| 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 |
| **/ |
| UINT8 PchDmiGen3EqPh3Method; |
| |
| /** Offset 0x030A - Enable/Disable DMI GEN3 Static EQ Phase1 programming |
| Program DMI Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static |
| Presets Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming |
| $EN_DIS |
| **/ |
| UINT8 DmiGen3ProgramStaticEq; |
| |
| /** Offset 0x030B - PCH DMI Gen3 Root port preset values per lane |
| Used for programming DMI Gen3 preset values per lane. Range: 0-9, 4 is default for each lane |
| **/ |
| UINT8 PchDmiGen3RootPortPreset[8]; |
| |
| /** Offset 0x0313 - PCH DMI Gen3 End port preset values per lane |
| Used for programming DMI Gen3 preset values per lane. Range: 0-9, 7 is default for each lane |
| **/ |
| UINT8 PchDmiGen3EndPointPreset[8]; |
| |
| /** Offset 0x031B - PCH DMI Gen3 End port Hint values per lane |
| Used for programming DMI Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane |
| **/ |
| UINT8 PchDmiGen3EndPointHint[8]; |
| |
| /** Offset 0x0323 - DMI ASPM Configuration:{Combo |
| Set ASPM Configuration |
| 0:Disabled, 1:L0s, 2:L1, 3:L1L0s |
| **/ |
| UINT8 DmiAspm; |
| |
| /** Offset 0x0324 - Reserved |
| **/ |
| UINT8 Reserved20; |
| |
| /** Offset 0x0325 - Enable/Disable DMI GEN3 Hardware Eq |
| Enable/Disable DMI GEN3 Hardware Eq. Disabled(0x0): Disable Hardware Eq, Enabled(0x1)(Default): |
| Enable EQ Phase1 Static Presets Programming |
| $EN_DIS |
| **/ |
| UINT8 DmiHweq; |
| |
| /** Offset 0x0326 - Enable/Disable DMI GEN3 Phase 23 Bypass |
| DMIGEN3 Phase 23 Bypass. Disabled(0x0)(Default): Disable Phase 23 Bypass, Enabled(0x1): |
| Enable Phase 23 Bypass |
| $EN_DIS |
| **/ |
| UINT8 Gen3EqPhase23Bypass; |
| |
| /** Offset 0x0327 - Enable/Disable DMI GEN3 Phase 3 Bypass |
| DMIGEN3 Phase 3 Bypass. Disabled(0x0)(Default): Disable Phase 3 Bypass, Enabled(0x1): |
| Enable Phase 3 Bypass |
| $EN_DIS |
| **/ |
| UINT8 Gen3EqPhase3Bypass; |
| |
| /** Offset 0x0328 - Enable/Disable DMI Gen3 EQ Local Transmitter Coefficient Override Enable |
| Program Gen3 EQ Local Transmitter Coefficient Override. Disabled(0x0): Disable Local |
| Transmitter Coefficient Override, Enabled(0x1)(Default): Enable Local Transmitter |
| Coefficient Override |
| $EN_DIS |
| **/ |
| UINT8 Gen3LtcoEnable; |
| |
| /** Offset 0x0329 - Enable/Disable DMI Gen3 EQ Remote Transmitter Coefficient/Preset Override Enable |
| Program Remote Transmitter Coefficient/Preset Override. Disabled(0x0)(Default): |
| Disable Remote Transmitter Coefficient/Preset Override, Enabled(0x1): Enable Remote |
| Transmitter Coefficient/Preset Override |
| $EN_DIS |
| **/ |
| UINT8 Gen3RtcoRtpoEnable; |
| |
| /** Offset 0x032A - DMI Gen3 Transmitter Pre-Cursor Coefficient |
| Used for programming DMI Gen3 Transmitter Pre-Cursor Coefficient . Range: 0-10, |
| 2 is default for each lane |
| **/ |
| UINT8 DmiGen3Ltcpre[8]; |
| |
| /** Offset 0x0332 - DMI Gen3 Transmitter Post-Cursor Coefficient |
| Used for programming Transmitter Post-Cursor Coefficient. Range: 0-9, 2 is default |
| for each lane |
| **/ |
| UINT8 DmiGen3Ltcpo[8]; |
| |
| /** Offset 0x033A - Reserved |
| **/ |
| UINT8 Reserved21[34]; |
| |
| /** Offset 0x035C - Enable/Disable DMI GEN3 DmiGen3DsPresetEnable |
| Enable/Disable DMI GEN3 DmiGen3DsPreset. Auto(0x0)(Default): DmiGen3DsPresetEnable, |
| Manual(0x1): Enable DmiGen3DsPresetEnable |
| $EN_DIS |
| **/ |
| UINT8 DmiGen3DsPresetEnable; |
| |
| /** Offset 0x035D - DMI Gen3 Root port preset Rx values per lane |
| Used for programming DMI Gen3 preset values per lane. Range: 0-10, 1 is default |
| for each lane |
| **/ |
| UINT8 DmiGen3DsPortRxPreset[8]; |
| |
| /** Offset 0x0365 - DMI Gen3 Root port preset Tx values per lane |
| Used for programming DMI Gen3 preset values per lane. Range: 0-10, 7 is default |
| for each lane |
| **/ |
| UINT8 DmiGen3DsPortTxPreset[8]; |
| |
| /** Offset 0x036D - Enable/Disable DMI GEN3 DmiGen3UsPresetEnable |
| Enable/Disable DMI GEN3 DmiGen3UsPreset. Auto(0x0)(Default): DmiGen3UsPresetEnable, |
| Manual(0x1): Enable DmiGen3UsPresetEnable |
| $EN_DIS |
| **/ |
| UINT8 DmiGen3UsPresetEnable; |
| |
| /** Offset 0x036E - DMI Gen3 Root port preset Rx values per lane |
| Used for programming DMI Gen3 preset values per lane. Range: 0-10, 7 is default |
| for each lane |
| **/ |
| UINT8 DmiGen3UsPortRxPreset[8]; |
| |
| /** Offset 0x0376 - DMI Gen3 Root port preset Tx values per lane |
| Used for programming DMI Gen3 preset values per lane. Range: 0-10, 1 is default |
| for each lane |
| **/ |
| UINT8 DmiGen3UsPortTxPreset[8]; |
| |
| /** Offset 0x037E - Reserved |
| **/ |
| UINT8 Reserved22[54]; |
| |
| /** Offset 0x03B4 - DMI ASPM L1 exit Latency |
| Range: 0-7, 4 is default L1 exit Latency |
| **/ |
| UINT8 DmiAspmL1ExitLatency; |
| |
| /** Offset 0x03B5 - Reserved |
| **/ |
| UINT8 Reserved23[63]; |
| |
| /** Offset 0x03F4 - BIST on Reset |
| Enable/Disable BIST (Built-In Self Test) on reset. <b>0: Disable</b>; 1: Enable. |
| $EN_DIS |
| **/ |
| UINT8 BistOnReset; |
| |
| /** Offset 0x03F5 - Skip Stop PBET Timer Enable/Disable |
| Skip Stop PBET Timer; <b>0: Disable</b>; 1: Enable |
| $EN_DIS |
| **/ |
| UINT8 SkipStopPbet; |
| |
| /** Offset 0x03F6 - Over clocking support |
| Over clocking support; <b>0: Disable</b>; 1: Enable |
| $EN_DIS |
| **/ |
| UINT8 OcSupport; |
| |
| /** Offset 0x03F7 - Over clocking Lock |
| Lock Overclocking. 0: Disable; <b>1: Enable</b> |
| $EN_DIS |
| **/ |
| UINT8 OcLock; |
| |
| /** Offset 0x03F8 - Maximum Core Turbo Ratio Override |
| Maximum core turbo ratio override allows to increase CPU core frequency beyond the |
| fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-85 if CoreRatioExtensionMode |
| is disabled. 0-120 if CoreRatioExtensionMode is enabled. |
| **/ |
| UINT8 CoreMaxOcRatio; |
| |
| /** Offset 0x03F9 - Core voltage mode |
| Core voltage mode; <b>0: Adaptive</b>; 1: Override. |
| $EN_DIS |
| **/ |
| UINT8 CoreVoltageMode; |
| |
| /** Offset 0x03FA - Maximum clr turbo ratio override |
| Maximum clr turbo ratio override allows to increase CPU clr frequency beyond the |
| fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-85 |
| **/ |
| UINT8 RingMaxOcRatio; |
| |
| /** Offset 0x03FB - Hyper Threading Enable/Disable |
| Enable or Disable Hyper-Threading Technology. 0: Disable; <b>1: Enable</b> |
| $EN_DIS |
| **/ |
| UINT8 HyperThreading; |
| |
| /** Offset 0x03FC - Enable or Disable CPU Ratio Override |
| Enable/Disable CPU Flex Ratio Programming; <b>0: Disable</b>; 1: Enable. |
| $EN_DIS |
| **/ |
| UINT8 CpuRatioOverride; |
| |
| /** Offset 0x03FD - CPU ratio value |
| This value must be between Max Efficiency Ratio (LFM) and Maximum non-turbo ratio |
| set by Hardware (HFM). Valid Range 0 to 63. |
| **/ |
| UINT8 CpuRatio; |
| |
| /** Offset 0x03FE - Reserved |
| **/ |
| UINT8 Reserved24; |
| |
| /** Offset 0x03FF - Number of active big cores |
| Number of P-cores to enable in each processor package. Note: Number of P-Cores and |
| E-Cores are looked at together. When both are {0,0 |
| 0:Disable all big cores, 1:1, 2:2, 3:3, 0xFF:Active all big cores |
| **/ |
| UINT8 ActiveCoreCount; |
| |
| /** Offset 0x0400 - Processor Early Power On Configuration FCLK setting |
| FCLK frequency can take values of 400MHz, 800MHz and 1GHz. <b>0: 800 MHz (ULT/ULX)</b>. |
| <b>1: 1 GHz (DT/Halo)</b>. Not supported on ULT/ULX.- 2: 400 MHz. - 3: Reserved |
| 0:800 MHz, 1: 1 GHz, 2: 400 MHz, 3: Reserved |
| **/ |
| UINT8 FClkFrequency; |
| |
| /** Offset 0x0401 - Enable or Disable VMX |
| Enable or Disable VMX, When enabled, a VMM can utilize the additional hardware capabilities |
| provided by Vanderpool Technology. 0: Disable; <b>1: Enable</b>. |
| $EN_DIS |
| **/ |
| UINT8 VmxEnable; |
| |
| /** Offset 0x0402 - AVX2 Ratio Offset |
| 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio |
| vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. |
| **/ |
| UINT8 Avx2RatioOffset; |
| |
| /** Offset 0x0403 - AVX3 Ratio Offset |
| 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio |
| vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. |
| **/ |
| UINT8 Avx3RatioOffset; |
| |
| /** Offset 0x0404 - BCLK Adaptive Voltage Enable |
| When enabled, the CPU V/F curves are aware of BCLK frequency when calculated. </b>0: |
| Disable;<b> 1: Enable |
| $EN_DIS |
| **/ |
| UINT8 BclkAdaptiveVoltage; |
| |
| /** Offset 0x0405 - Reserved |
| **/ |
| UINT8 Reserved25; |
| |
| /** Offset 0x0406 - core voltage override |
| The core voltage override which is applied to the entire range of cpu core frequencies. |
| Valid Range 0 to 2000 |
| **/ |
| UINT16 CoreVoltageOverride; |
| |
| /** Offset 0x0408 - Core Turbo Adaptive Voltage |
| Adaptive voltage applied to the cpu core when the cpu is operating in turbo mode. |
| Valid Range 0 to 2000 |
| **/ |
| UINT16 CoreAdaptiveVoltage; |
| |
| /** Offset 0x040A - Core Turbo voltage Offset |
| The voltage offset applied to the core while operating in turbo mode.Valid Range 0 to 1000 |
| **/ |
| UINT16 CoreVoltageOffset; |
| |
| /** Offset 0x040C - Core PLL voltage offset |
| Core PLL voltage offset. <b>0: No offset</b>. Range 0-15 |
| **/ |
| UINT8 CorePllVoltageOffset; |
| |
| /** Offset 0x040D - Ring Downbin |
| Ring Downbin enable/disable. When enabled, CPU will ensure the ring ratio is always |
| lower than the core ratio.0: Disable; <b>1: Enable.</b> |
| $EN_DIS |
| **/ |
| UINT8 RingDownBin; |
| |
| /** Offset 0x040E - Ring voltage mode |
| Ring voltage mode; <b>0: Adaptive</b>; 1: Override. |
| $EN_DIS |
| **/ |
| UINT8 RingVoltageMode; |
| |
| /** Offset 0x040F - TjMax Offset |
| TjMax offset.Specified value here is clipped by pCode (125 - TjMax Offset) to support |
| TjMax in the range of 62 to 115 deg Celsius. Valid Range 10 - 63 |
| **/ |
| UINT8 TjMaxOffset; |
| |
| /** Offset 0x0410 - Ring voltage override |
| The ring voltage override which is applied to the entire range of cpu ring frequencies. |
| Valid Range 0 to 2000 |
| **/ |
| UINT16 RingVoltageOverride; |
| |
| /** Offset 0x0412 - Ring Turbo Adaptive Voltage |
| Adaptive voltage applied to the cpu ring when the cpu is operating in turbo mode. |
| Valid Range 0 to 2000 |
| **/ |
| UINT16 RingAdaptiveVoltage; |
| |
| /** Offset 0x0414 - Ring Turbo voltage Offset |
| The voltage offset applied to the ring while operating in turbo mode. Valid Range 0 to 1000 |
| **/ |
| UINT16 RingVoltageOffset; |
| |
| /** Offset 0x0416 - Enable or Disable TME |
| Configure Total Memory Encryption (TME) to protect DRAM data from physical attacks. |
| <b>0: Disable</b>; 1: Enable. |
| $EN_DIS |
| **/ |
| UINT8 TmeEnable; |
| |
| /** Offset 0x0417 - Enable CPU CrashLog |
| Enable or Disable CPU CrashLog; 0: Disable; <b>1: Enable</b>. |
| $EN_DIS |
| **/ |
| UINT8 CpuCrashLogEnable; |
| |
| /** Offset 0x0418 - CPU Run Control |
| Enable, Disable or Do not configure CPU Run Control; 0: Disable; 1: Enable ; <b>2: |
| No Change</b> |
| 0:Disabled, 1:Enabled, 2:No Change |
| **/ |
| UINT8 DebugInterfaceEnable; |
| |
| /** Offset 0x0419 - CPU Run Control Lock |
| Lock or Unlock CPU Run Control; 0: Disable; <b>1: Enable</b>. |
| $EN_DIS |
| **/ |
| UINT8 DebugInterfaceLockEnable; |
| |
| /** Offset 0x041A - Reserved |
| **/ |
| UINT8 Reserved26[67]; |
| |
| /** Offset 0x045D - Core VF Point Offset Mode |
| Selects Core Voltage & Frequency Offset mode between Legacy and Selection modes. |
| In Legacy Mode, setting a global offset for the entire VF curve. In Selection Mode, |
| setting a selected VF point; <b>0: Legacy</b>; 1: Selection. |
| 0:Legacy, 1:Selection |
| **/ |
| UINT8 CoreVfPointOffsetMode; |
| |
| /** Offset 0x045E - Core VF Point Offset |
| Array used to specifies the Core Voltage Offset applied to the each selected VF |
| Point. This voltage is specified in millivolts. |
| **/ |
| UINT16 CoreVfPointOffset[15]; |
| |
| /** Offset 0x047C - Core VF Point Offset Prefix |
| Sets the CoreVfPointOffset value as positive or negative for corresponding core |
| VF Point; <b>0: Positive </b>; 1: Negative. |
| 0:Positive, 1:Negative |
| **/ |
| UINT8 CoreVfPointOffsetPrefix[15]; |
| |
| /** Offset 0x048B - Core VF Point Ratio |
| Array for the each selected Core VF Point to display the ration. |
| **/ |
| UINT8 CoreVfPointRatio[15]; |
| |
| /** Offset 0x049A - Core VF Point Count |
| Number of supported Core Voltage & Frequency Point Offset |
| **/ |
| UINT8 CoreVfPointCount; |
| |
| /** Offset 0x049B - Reserved |
| **/ |
| UINT8 Reserved27[25]; |
| |
| /** Offset 0x04B4 - Per Core Max Ratio override |
| Enable or disable Per Core PState OC supported by writing OCMB 0x1D to program new |
| favored core ratio to each Core. <b>0: Disable</b>, 1: enable |
| $EN_DIS |
| **/ |
| UINT8 PerCoreRatioOverride; |
| |
| /** Offset 0x04B5 - Reserved |
| **/ |
| UINT8 Reserved28[41]; |
| |
| /** Offset 0x04DE - Per Core Current Max Ratio |
| Array for the Per Core Max Ratio |
| **/ |
| UINT8 PerCoreRatio[8]; |
| |
| /** Offset 0x04E6 - Reserved |
| **/ |
| UINT8 Reserved29[69]; |
| |
| /** Offset 0x052B - Pvd Ratio Threshold for SOC/CPU die |
| Array of Pvd Ratio Threshold for SOC/CPU die is the threshold value for input ratio |
| (P0 to Pn) to select the multiplier so that the output is within the DCO frequency |
| range. As per the die selected, this threshold is applied to SA and MC/CMI PLL |
| for SOC die and SA, Ring and Atom PLL for CPU die. Range 0-63. When the threshold |
| is 0, static PVD ratio is selected based on the PVD Mode for SOC. <b>0: Default</b>. |
| **/ |
| UINT8 PvdRatioThreshold[2]; |
| |
| /** Offset 0x052D - Reserved |
| **/ |
| UINT8 Reserved30[68]; |
| |
| /** Offset 0x0571 - GPIO Override |
| Gpio Override Level - FSP will not configure any GPIOs and rely on GPIO setings |
| before moved to FSP. Available configurations 0: Disable; 1: Level 1 - Skips GPIO |
| configuration in PEI/FSPM/FSPT phase;2: Level 2 - Reserved for use |
| **/ |
| UINT8 GpioOverride; |
| |
| /** Offset 0x0572 - Reserved |
| **/ |
| UINT8 Reserved31[10]; |
| |
| /** Offset 0x057C - CPU BCLK OC Frequency |
| CPU BCLK OC Frequency in KHz units. 98000000Hz = 98MHz <b>0 - Auto</b>. Range is |
| 40Mhz-1000Mhz. |
| **/ |
| UINT32 CpuBclkOcFrequency; |
| |
| /** Offset 0x0580 - Reserved |
| **/ |
| UINT8 Reserved32[4]; |
| |
| /** Offset 0x0584 - Enable CPU CrashLog GPRs dump |
| Enable or Disable CPU CrashLog GPRs dump; <b>0: Disable</b>; 1: Enable; 2: Only |
| disable Smm GPRs dump |
| 0:Disabled, 1:Enabled, 2:Only Smm GPRs Disabled |
| **/ |
| UINT8 CrashLogGprs; |
| |
| /** Offset 0x0585 - Reserved |
| **/ |
| UINT8 Reserved33[273]; |
| |
| /** Offset 0x0696 - Thermal Design Current enable/disable |
| Thermal Design Current enable/disable; <b>0: Disable</b>; 1: Enable. [0] for IA, |
| [1] for GT, [2] for SA, [3] through [5] are Reserved. |
| **/ |
| UINT8 TdcEnable[6]; |
| |
| /** Offset 0x069C - Thermal Design Current time window |
| TDC Time Window, value of IA either in milliseconds or seconds, value of GT/SA is |
| in milliseconds. 1ms is default. Range of IA from 1ms to 448s, Range of GT/SA is |
| 1ms to 10ms, except for 9ms. 9ms has no valid encoding in the MSR definition. |
| **/ |
| UINT32 TdcTimeWindow[6]; |
| |
| /** Offset 0x06B4 - Reserved |
| **/ |
| UINT8 Reserved34[336]; |
| |
| /** Offset 0x0804 - BiosGuard |
| Enable/Disable. 0: Disable, Enable/Disable BIOS Guard feature, 1: enable |
| $EN_DIS |
| **/ |
| UINT8 BiosGuard; |
| |
| /** Offset 0x0805 |
| **/ |
| UINT8 BiosGuardToolsInterface; |
| |
| /** Offset 0x0806 - Txt |
| Enables utilization of additional hardware capabilities provided by Intel (R) Trusted |
| Execution Technology. Changes require a full power cycle to take effect. <b>0: |
| Disable</b>, 1: Enable |
| $EN_DIS |
| **/ |
| UINT8 Txt; |
| |
| /** Offset 0x0807 - Reserved |
| **/ |
| UINT8 Reserved35; |
| |
| /** Offset 0x0808 - PrmrrSize |
| Enable/Disable. 0: Disable, define default value of PrmrrSize , 1: enable |
| **/ |
| UINT32 PrmrrSize; |
| |
| /** Offset 0x080C - SinitMemorySize |
| Enable/Disable. 0: Disable, define default value of SinitMemorySize , 1: enable |
| **/ |
| UINT32 SinitMemorySize; |
| |
| /** Offset 0x0810 - Reserved |
| **/ |
| UINT8 Reserved36[8]; |
| |
| /** Offset 0x0818 - TxtDprMemoryBase |
| Enable/Disable. 0: Disable, define default value of TxtDprMemoryBase , 1: enable |
| **/ |
| UINT64 TxtDprMemoryBase; |
| |
| /** Offset 0x0820 - TxtHeapMemorySize |
| Enable/Disable. 0: Disable, define default value of TxtHeapMemorySize , 1: enable |
| **/ |
| UINT32 TxtHeapMemorySize; |
| |
| /** Offset 0x0824 - TxtDprMemorySize |
| Reserve DPR memory size (0-255) MB. 0: Disable, define default value of TxtDprMemorySize |
| , 1: enable |
| **/ |
| UINT32 TxtDprMemorySize; |
| |
| /** Offset 0x0828 - BiosAcmBase |
| Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable |
| **/ |
| UINT32 BiosAcmBase; |
| |
| /** Offset 0x082C - BiosAcmSize |
| Enable/Disable. 0: Disable, define default value of BiosAcmSize , 1: enable |
| **/ |
| UINT32 BiosAcmSize; |
| |
| /** Offset 0x0830 - ApStartupBase |
| Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable |
| **/ |
| UINT32 ApStartupBase; |
| |
| /** Offset 0x0834 - TgaSize |
| Enable/Disable. 0: Disable, define default value of TgaSize , 1: enable |
| **/ |
| UINT32 TgaSize; |
| |
| /** Offset 0x0838 - TxtLcpPdBase |
| Enable/Disable. 0: Disable, define default value of TxtLcpPdBase , 1: enable |
| **/ |
| UINT64 TxtLcpPdBase; |
| |
| /** Offset 0x0840 - TxtLcpPdSize |
| Enable/Disable. 0: Disable, define default value of TxtLcpPdSize , 1: enable |
| **/ |
| UINT64 TxtLcpPdSize; |
| |
| /** Offset 0x0848 - IsTPMPresence |
| IsTPMPresence default values |
| **/ |
| UINT8 IsTPMPresence; |
| |
| /** Offset 0x0849 - Reserved |
| **/ |
| UINT8 Reserved37[32]; |
| |
| /** Offset 0x0869 - Enable PCH HSIO PCIE Rx Set Ctle |
| Enable PCH PCIe Gen 3 Set CTLE Value. |
| **/ |
| UINT8 PchPcieHsioRxSetCtleEnable[28]; |
| |
| /** Offset 0x0885 - PCH HSIO PCIE Rx Set Ctle Value |
| PCH PCIe Gen 3 Set CTLE Value. |
| **/ |
| UINT8 PchPcieHsioRxSetCtle[28]; |
| |
| /** Offset 0x08A1 - Enble PCH HSIO PCIE TX Gen 1 Downscale Amplitude Adjustment value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchPcieHsioTxGen1DownscaleAmpEnable[28]; |
| |
| /** Offset 0x08BD - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value |
| PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. |
| **/ |
| UINT8 PchPcieHsioTxGen1DownscaleAmp[28]; |
| |
| /** Offset 0x08D9 - Enable PCH HSIO PCIE TX Gen 2 Downscale Amplitude Adjustment value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchPcieHsioTxGen2DownscaleAmpEnable[28]; |
| |
| /** Offset 0x08F5 - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value |
| PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. |
| **/ |
| UINT8 PchPcieHsioTxGen2DownscaleAmp[28]; |
| |
| /** Offset 0x0911 - Enable PCH HSIO PCIE TX Gen 3 Downscale Amplitude Adjustment value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchPcieHsioTxGen3DownscaleAmpEnable[28]; |
| |
| /** Offset 0x092D - PCH HSIO PCIE Gen 3 TX Output Downscale Amplitude Adjustment value |
| PCH PCIe Gen 3 TX Output Downscale Amplitude Adjustment value. |
| **/ |
| UINT8 PchPcieHsioTxGen3DownscaleAmp[28]; |
| |
| /** Offset 0x0949 - Enable PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment Setting value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchPcieHsioTxGen1DeEmphEnable[28]; |
| |
| /** Offset 0x0965 - PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment value |
| PCH PCIe Gen 1 TX Output De-Emphasis Adjustment Setting. |
| **/ |
| UINT8 PchPcieHsioTxGen1DeEmph[28]; |
| |
| /** Offset 0x0981 - Enable PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchPcieHsioTxGen2DeEmph3p5Enable[28]; |
| |
| /** Offset 0x099D - PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment value |
| PCH PCIe Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting. |
| **/ |
| UINT8 PchPcieHsioTxGen2DeEmph3p5[28]; |
| |
| /** Offset 0x09B9 - Enable PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchPcieHsioTxGen2DeEmph6p0Enable[28]; |
| |
| /** Offset 0x09D5 - PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment value |
| PCH PCIe Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting. |
| **/ |
| UINT8 PchPcieHsioTxGen2DeEmph6p0[28]; |
| |
| /** Offset 0x09F1 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchSataHsioRxGen1EqBoostMagEnable[8]; |
| |
| /** Offset 0x09F9 - PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value |
| PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value. |
| **/ |
| UINT8 PchSataHsioRxGen1EqBoostMag[8]; |
| |
| /** Offset 0x0A01 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchSataHsioRxGen2EqBoostMagEnable[8]; |
| |
| /** Offset 0x0A09 - PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value |
| PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value. |
| **/ |
| UINT8 PchSataHsioRxGen2EqBoostMag[8]; |
| |
| /** Offset 0x0A11 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchSataHsioRxGen3EqBoostMagEnable[8]; |
| |
| /** Offset 0x0A19 - PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value |
| PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value. |
| **/ |
| UINT8 PchSataHsioRxGen3EqBoostMag[8]; |
| |
| /** Offset 0x0A21 - Enable PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchSataHsioTxGen1DownscaleAmpEnable[8]; |
| |
| /** Offset 0x0A29 - PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value |
| PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value. |
| **/ |
| UINT8 PchSataHsioTxGen1DownscaleAmp[8]; |
| |
| /** Offset 0x0A31 - Enable PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchSataHsioTxGen2DownscaleAmpEnable[8]; |
| |
| /** Offset 0x0A39 - PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value |
| PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value. |
| **/ |
| UINT8 PchSataHsioTxGen2DownscaleAmp[8]; |
| |
| /** Offset 0x0A41 - Enable PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchSataHsioTxGen3DownscaleAmpEnable[8]; |
| |
| /** Offset 0x0A49 - PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value |
| PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value. |
| **/ |
| UINT8 PchSataHsioTxGen3DownscaleAmp[8]; |
| |
| /** Offset 0x0A51 - Enable PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchSataHsioTxGen1DeEmphEnable[8]; |
| |
| /** Offset 0x0A59 - PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting |
| PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting. |
| **/ |
| UINT8 PchSataHsioTxGen1DeEmph[8]; |
| |
| /** Offset 0x0A61 - Enable PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchSataHsioTxGen2DeEmphEnable[8]; |
| |
| /** Offset 0x0A69 - PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting |
| PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting. |
| **/ |
| UINT8 PchSataHsioTxGen2DeEmph[8]; |
| |
| /** Offset 0x0A71 - Enable PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchSataHsioTxGen3DeEmphEnable[8]; |
| |
| /** Offset 0x0A79 - PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting |
| PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting. |
| **/ |
| UINT8 PchSataHsioTxGen3DeEmph[8]; |
| |
| /** Offset 0x0A81 - PCH LPC Enhance the port 8xh decoding |
| Original LPC only decodes one byte of port 80h. |
| $EN_DIS |
| **/ |
| UINT8 PchLpcEnhancePort8xhDecoding; |
| |
| /** Offset 0x0A82 - PCH Port80 Route |
| Control where the Port 80h cycles are sent, 0: LPC; 1: PCI. |
| $EN_DIS |
| **/ |
| UINT8 PchPort80Route; |
| |
| /** Offset 0x0A83 - Enable SMBus ARP support |
| Enable SMBus ARP support. |
| $EN_DIS |
| **/ |
| UINT8 SmbusArpEnable; |
| |
| /** Offset 0x0A84 - Number of RsvdSmbusAddressTable. |
| The number of elements in the RsvdSmbusAddressTable. |
| **/ |
| UINT8 PchNumRsvdSmbusAddresses; |
| |
| /** Offset 0x0A85 - Reserved |
| **/ |
| UINT8 Reserved38; |
| |
| /** Offset 0x0A86 - SMBUS Base Address |
| SMBUS Base Address (IO space). |
| **/ |
| UINT16 PchSmbusIoBase; |
| |
| /** Offset 0x0A88 - Enable SMBus Alert Pin |
| Enable SMBus Alert Pin. |
| $EN_DIS |
| **/ |
| UINT8 PchSmbAlertEnable; |
| |
| /** Offset 0x0A89 - Usage type for SOC/IOE ClkSrc |
| 0-23: PCIe rootport, 0x70:LAN, 0x80: unspecified but in use (free running), 0xFF: not used |
| **/ |
| UINT8 PcieClkSrcUsage[16]; |
| |
| /** Offset 0x0A99 - Reserved |
| **/ |
| UINT8 Reserved39[16]; |
| |
| /** Offset 0x0AA9 - SOC/IOE ClkReq-to-ClkSrc mapping |
| Number of ClkReq signal assigned to ClkSrc |
| **/ |
| UINT8 PcieClkSrcClkReq[16]; |
| |
| /** Offset 0x0AB9 - Reserved |
| **/ |
| UINT8 Reserved40[59]; |
| |
| /** Offset 0x0AF4 - Enable SOC/IOE PCIE RP Mask |
| Enable/disable SOC/IOE PCIE Root Ports. 0: disable, 1: enable. One bit for each |
| port, bit0 for port1, bit1 for port2, and so on. |
| **/ |
| UINT16 PcieRpEnableMask; |
| |
| /** Offset 0x0AF6 - VC Type |
| Virtual Channel Type Select: 0: VC0, 1: VC1. |
| 0: VC0, 1: VC1 |
| **/ |
| UINT8 PchHdaVcType; |
| |
| /** Offset 0x0AF7 - Universal Audio Architecture compliance for DSP enabled system |
| 0: Not-UAA Compliant (Intel SST driver supported only), 1: UAA Compliant (HDA Inbox |
| driver or SST driver supported). |
| $EN_DIS |
| **/ |
| UINT8 PchHdaDspUaaCompliance; |
| |
| /** Offset 0x0AF8 - Enable HD Audio Link |
| Enable/disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1. |
| $EN_DIS |
| **/ |
| UINT8 PchHdaAudioLinkHdaEnable; |
| |
| /** Offset 0x0AF9 - Enable HDA SDI lanes |
| Enable/disable HDA SDI lanes. |
| **/ |
| UINT8 PchHdaSdiEnable[2]; |
| |
| /** Offset 0x0AFB - HDA Power/Clock Gating (PGD/CGD) |
| Enable/Disable HD Audio Power and Clock Gating(POR: Enable). 0: PLATFORM_POR, 1: |
| FORCE_ENABLE, 2: FORCE_DISABLE. |
| 0: POR, 1: Force Enable, 2: Force Disable |
| **/ |
| UINT8 PchHdaTestPowerClockGating; |
| |
| /** Offset 0x0AFC - Enable HD Audio DMIC_N Link |
| Enable/disable HD Audio DMIC1 link. Muxed with SNDW3. |
| **/ |
| UINT8 PchHdaAudioLinkDmicEnable[2]; |
| |
| /** Offset 0x0AFE - Reserved |
| **/ |
| UINT8 Reserved41[2]; |
| |
| /** Offset 0x0B00 - DMIC<N> ClkA Pin Muxing (N - DMIC number) |
| Determines DMIC<N> ClkA Pin muxing. See GPIO_*_MUXING_DMIC<N>_CLKA_* |
| **/ |
| UINT32 PchHdaAudioLinkDmicClkAPinMux[2]; |
| |
| /** Offset 0x0B08 - DMIC<N> ClkB Pin Muxing |
| Determines DMIC<N> ClkA Pin muxing. See GPIO_*_MUXING_DMIC<N>_CLKB_* |
| **/ |
| UINT32 PchHdaAudioLinkDmicClkBPinMux[2]; |
| |
| /** Offset 0x0B10 - Enable HD Audio DSP |
| Enable/disable HD Audio DSP feature. |
| $EN_DIS |
| **/ |
| UINT8 PchHdaDspEnable; |
| |
| /** Offset 0x0B11 - Reserved |
| **/ |
| UINT8 Reserved42[3]; |
| |
| /** Offset 0x0B14 - DMIC<N> Data Pin Muxing |
| Determines DMIC<N> Data Pin muxing. See GPIO_*_MUXING_DMIC<N>_DATA_* |
| **/ |
| UINT32 PchHdaAudioLinkDmicDataPinMux[2]; |
| |
| /** Offset 0x0B1C - Enable HD Audio SSP0 Link |
| Enable/disable HD Audio SSP_N/I2S link. Muxed with HDA. N-number 0-5 |
| **/ |
| UINT8 PchHdaAudioLinkSspEnable[6]; |
| |
| /** Offset 0x0B22 - Enable HD Audio SoundWire#N Link |
| Enable/disable HD Audio SNDW#N link. Muxed with HDA. |
| **/ |
| UINT8 PchHdaAudioLinkSndwEnable[4]; |
| |
| /** Offset 0x0B26 - iDisp-Link Frequency |
| iDisp-Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 4: 96MHz, 3: 48MHz. |
| 4: 96MHz, 3: 48MHz |
| **/ |
| UINT8 PchHdaIDispLinkFrequency; |
| |
| /** Offset 0x0B27 - Reserved |
| **/ |
| UINT8 Reserved43; |
| |
| /** Offset 0x0B28 - iDisp-Link T-mode |
| iDisp-Link T-Mode (PCH_HDAUDIO_IDISP_TMODE enum): 0: 2T, 2: 4T, 3: 8T, 4: 16T |
| 0: 2T, 2: 4T, 3: 8T, 4: 16T |
| **/ |
| UINT8 PchHdaIDispLinkTmode; |
| |
| /** Offset 0x0B29 - iDisplay Audio Codec disconnection |
| 0: Not disconnected, enumerable, 1: Disconnected SDI, not enumerable. |
| $EN_DIS |
| **/ |
| UINT8 PchHdaIDispCodecDisconnect; |
| |
| /** Offset 0x0B2A - Reserved |
| **/ |
| UINT8 Reserved44[6]; |
| |
| /** Offset 0x0B30 - CNVi DDR RFI Mitigation |
| Enable/Disable DDR RFI Mitigation. Default is ENABLE. 0: DISABLE, 1: ENABLE |
| $EN_DIS |
| **/ |
| UINT8 CnviDdrRfim; |
| |
| /** Offset 0x0B31 - Reserved |
| **/ |
| UINT8 Reserved45[11]; |
| |
| /** Offset 0x0B3C - Debug Interfaces |
| Debug Interfaces. BIT0-RAM, BIT1-UART, BIT3-USB3, BIT4-Serial IO, BIT5-TraceHub, |
| BIT2 - Not used. |
| **/ |
| UINT8 PcdDebugInterfaceFlags; |
| |
| /** Offset 0x0B3D - Serial Io Uart Debug Controller Number |
| Select SerialIo Uart Controller for debug. |
| 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2 |
| **/ |
| UINT8 SerialIoUartDebugControllerNumber; |
| |
| /** Offset 0x0B3E - Serial Io Uart Debug Auto Flow |
| Enables UART hardware flow control, CTS and RTS lines. |
| $EN_DIS |
| **/ |
| UINT8 SerialIoUartDebugAutoFlow; |
| |
| /** Offset 0x0B3F - Reserved |
| **/ |
| UINT8 Reserved46; |
| |
| /** Offset 0x0B40 - Serial Io Uart Debug BaudRate |
| Set default BaudRate Supported from 0 - default to 6000000. Recommended values 9600, |
| 19200, 57600, 115200, 460800, 921600, 1500000, 1843200, 3000000, 3686400, 6000000 |
| **/ |
| UINT32 SerialIoUartDebugBaudRate; |
| |
| /** Offset 0x0B44 - Serial Io Uart Debug Parity |
| Set default Parity. |
| 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity |
| **/ |
| UINT8 SerialIoUartDebugParity; |
| |
| /** Offset 0x0B45 - Serial Io Uart Debug Stop Bits |
| Set default stop bits. |
| 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: TwoStopBits |
| **/ |
| UINT8 SerialIoUartDebugStopBits; |
| |
| /** Offset 0x0B46 - Serial Io Uart Debug Data Bits |
| Set default word length. 0: Default, 5,6,7,8 |
| 5:5BITS, 6:6BITS, 7:7BITS, 8:8BITS |
| **/ |
| UINT8 SerialIoUartDebugDataBits; |
| |
| /** Offset 0x0B47 - Reserved |
| **/ |
| UINT8 Reserved47; |
| |
| /** Offset 0x0B48 - Serial Io Uart Debug Mmio Base |
| Select SerialIo Uart default MMIO resource in SEC/PEI phase when PcdSerialIoUartMode |
| = SerialIoUartPci. |
| **/ |
| UINT32 SerialIoUartDebugMmioBase; |
| |
| /** Offset 0x0B4C - ISA Serial Base selection |
| Select ISA Serial Base address. Default is 0x3F8. |
| 0:0x3F8, 1:0x2F8 |
| **/ |
| UINT8 PcdIsaSerialUartBase; |
| |
| /** Offset 0x0B4D - Reserved |
| **/ |
| UINT8 Reserved48; |
| |
| /** Offset 0x0B4E - Ring PLL voltage offset |
| Core PLL voltage offset. <b>0: No offset</b>. Range 0-15 |
| **/ |
| UINT8 RingPllVoltageOffset; |
| |
| /** Offset 0x0B4F - System Agent PLL voltage offset |
| Core PLL voltage offset. <b>0: No offset</b>. Range 0-15 |
| **/ |
| UINT8 SaPllVoltageOffset; |
| |
| /** Offset 0x0B50 - Reserved |
| **/ |
| UINT8 Reserved49; |
| |
| /** Offset 0x0B51 - Memory Controller PLL voltage offset |
| Core PLL voltage offset. <b>0: No offset</b>. Range 0-15 |
| **/ |
| UINT8 McPllVoltageOffset; |
| |
| /** Offset 0x0B52 - TCSS Thunderbolt PCIE Root Port 0 Enable |
| Set TCSS Thunderbolt PCIE Root Port 0. 0:Disabled 1:Enabled |
| $EN_DIS |
| **/ |
| UINT8 TcssItbtPcie0En; |
| |
| /** Offset 0x0B53 - TCSS Thunderbolt PCIE Root Port 1 Enable |
| Set TCSS Thunderbolt PCIE Root Port 1. 0:Disabled 1:Enabled |
| $EN_DIS |
| **/ |
| UINT8 TcssItbtPcie1En; |
| |
| /** Offset 0x0B54 - TCSS Thunderbolt PCIE Root Port 2 Enable |
| Set TCSS Thunderbolt PCIE Root Port 2. 0:Disabled 1:Enabled |
| $EN_DIS |
| **/ |
| UINT8 TcssItbtPcie2En; |
| |
| /** Offset 0x0B55 - TCSS Thunderbolt PCIE Root Port 3 Enable |
| Set TCSS Thunderbolt PCIE Root Port 3. 0:Disabled 1:Enabled |
| $EN_DIS |
| **/ |
| UINT8 TcssItbtPcie3En; |
| |
| /** Offset 0x0B56 - TCSS USB HOST (xHCI) Enable |
| Set TCSS XHCI. 0:Disabled 1:Enabled - Must be enabled if xDCI is enabled below |
| $EN_DIS |
| **/ |
| UINT8 TcssXhciEn; |
| |
| /** Offset 0x0B57 - TCSS USB DEVICE (xDCI) Enable |
| Set TCSS XDCI. 0:Disabled 1:Enabled - xHCI must be enabled if xDCI is enabled |
| $EN_DIS |
| **/ |
| UINT8 TcssXdciEn; |
| |
| /** Offset 0x0B58 - TCSS DMA0 Enable |
| Set TCSS DMA0. 0:Disabled 1:Enabled |
| $EN_DIS |
| **/ |
| UINT8 TcssDma0En; |
| |
| /** Offset 0x0B59 - TCSS DMA1 Enable |
| Set TCSS DMA1. 0:Disabled 1:Enabled |
| $EN_DIS |
| **/ |
| UINT8 TcssDma1En; |
| |
| /** Offset 0x0B5A - PcdSerialDebugBaudRate |
| Baud Rate for Serial Debug Messages. 3:9600, 4:19200, 6:56700, 7:115200. |
| 3:9600, 4:19200, 6:56700, 7:115200 |
| **/ |
| UINT8 PcdSerialDebugBaudRate; |
| |
| /** Offset 0x0B5B - HobBufferSize |
| Size to set HOB Buffer. 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value(assuming 63KB |
| total HOB size). |
| 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value |
| **/ |
| UINT8 HobBufferSize; |
| |
| /** Offset 0x0B5C - Early Command Training |
| Enables/Disable Early Command Training |
| $EN_DIS |
| **/ |
| UINT8 ECT; |
| |
| /** Offset 0x0B5D - SenseAmp Offset Training |
| Enables/Disable SenseAmp Offset Training |
| $EN_DIS |
| **/ |
| UINT8 SOT; |
| |
| /** Offset 0x0B5E - Early ReadMPR Timing Centering 2D |
| Enables/Disable Early ReadMPR Timing Centering 2D |
| $EN_DIS |
| **/ |
| UINT8 ERDMPRTC2D; |
| |
| /** Offset 0x0B5F - Read MPR Training |
| Enables/Disable Read MPR Training |
| $EN_DIS |
| **/ |
| UINT8 RDMPRT; |
| |
| /** Offset 0x0B60 - Receive Enable Training |
| Enables/Disable Receive Enable Training |
| $EN_DIS |
| **/ |
| UINT8 RCVET; |
| |
| /** Offset 0x0B61 - Jedec Write Leveling |
| Enables/Disable Jedec Write Leveling |
| $EN_DIS |
| **/ |
| UINT8 JWRL; |
| |
| /** Offset 0x0B62 - Early Write Time Centering 2D |
| Enables/Disable Early Write Time Centering 2D |
| $EN_DIS |
| **/ |
| UINT8 EWRTC2D; |
| |
| /** Offset 0x0B63 - Early Read Time Centering 2D |
| Enables/Disable Early Read Time Centering 2D |
| $EN_DIS |
| **/ |
| UINT8 ERDTC2D; |
| |
| /** Offset 0x0B64 - Reserved |
| **/ |
| UINT8 Reserved50; |
| |
| /** Offset 0x0B65 - Write Timing Centering 1D |
| Enables/Disable Write Timing Centering 1D |
| $EN_DIS |
| **/ |
| UINT8 WRTC1D; |
| |
| /** Offset 0x0B66 - Write Voltage Centering 1D |
| Enables/Disable Write Voltage Centering 1D |
| $EN_DIS |
| **/ |
| UINT8 WRVC1D; |
| |
| /** Offset 0x0B67 - Read Timing Centering 1D |
| Enables/Disable Read Timing Centering 1D |
| $EN_DIS |
| **/ |
| UINT8 RDTC1D; |
| |
| /** Offset 0x0B68 - Read Voltage Centering 1D |
| Enable/Disable Read Voltage Centering 1D |
| $EN_DIS |
| **/ |
| UINT8 RDVC1D; |
| |
| /** Offset 0x0B69 - Reserved |
| **/ |
| UINT8 Reserved51[10]; |
| |
| /** Offset 0x0B73 - Read Equalization Training |
| Enables/Disable Read Equalization Training |
| $EN_DIS |
| **/ |
| UINT8 RDEQT; |
| |
| /** Offset 0x0B74 - Reserved |
| **/ |
| UINT8 Reserved52[2]; |
| |
| /** Offset 0x0B76 - Write Timing Centering 2D |
| Enables/Disable Write Timing Centering 2D |
| $EN_DIS |
| **/ |
| UINT8 WRTC2D; |
| |
| /** Offset 0x0B77 - Read Timing Centering 2D |
| Enables/Disable Read Timing Centering 2D |
| $EN_DIS |
| **/ |
| UINT8 RDTC2D; |
| |
| /** Offset 0x0B78 - Write Voltage Centering 2D |
| Enables/Disable Write Voltage Centering 2D |
| $EN_DIS |
| **/ |
| UINT8 WRVC2D; |
| |
| /** Offset 0x0B79 - Read Voltage Centering 2D |
| Enables/Disable Read Voltage Centering 2D |
| $EN_DIS |
| **/ |
| UINT8 RDVC2D; |
| |
| /** Offset 0x0B7A - Reserved |
| **/ |
| UINT8 Reserved53; |
| |
| /** Offset 0x0B7B - Command Voltage Centering |
| Enables/Disable Command Voltage Centering |
| $EN_DIS |
| **/ |
| UINT8 CMDVC; |
| |
| /** Offset 0x0B7C - Late Command Training |
| Enables/Disable Late Command Training |
| $EN_DIS |
| **/ |
| UINT8 LCT; |
| |
| /** Offset 0x0B7D - Turn Around Timing Training |
| Enables/Disable Turn Around Timing Training |
| $EN_DIS |
| **/ |
| UINT8 TAT; |
| |
| /** Offset 0x0B7E - Rank Margin Tool |
| Enable/disable Rank Margin Tool |
| $EN_DIS |
| **/ |
| UINT8 RMT; |
| |
| /** Offset 0x0B7F - Reserved |
| **/ |
| UINT8 Reserved54; |
| |
| /** Offset 0x0B80 - DIMM SPD Alias Test |
| Enables/Disable DIMM SPD Alias Test |
| $EN_DIS |
| **/ |
| UINT8 ALIASCHK; |
| |
| /** Offset 0x0B81 - Retrain Margin Check |
| Enables/Disable Retrain Margin Check |
| $EN_DIS |
| **/ |
| UINT8 RMC; |
| |
| /** Offset 0x0B82 - Reserved |
| **/ |
| UINT8 Reserved55; |
| |
| /** Offset 0x0B83 - Dimm ODT Training |
| Enables/Disable Dimm ODT Training |
| $EN_DIS |
| **/ |
| UINT8 DIMMODTT; |
| |
| /** Offset 0x0B84 - DIMM RON Training |
| Enables/Disable DIMM RON Training |
| $EN_DIS |
| **/ |
| UINT8 DIMMRONT; |
| |
| /** Offset 0x0B85 - TxDqTCO Comp Training |
| Enable/Disable TxDqTCO Comp Training |
| $EN_DIS |
| **/ |
| UINT8 TXTCO; |
| |
| /** Offset 0x0B86 - ClkTCO Comp Training |
| Enable/Disable ClkTCO Comp Training |
| $EN_DIS |
| **/ |
| UINT8 CLKTCO; |
| |
| /** Offset 0x0B87 - CMD Slew Rate Training |
| Enable/Disable CMD Slew Rate Training |
| $EN_DIS |
| **/ |
| UINT8 CMDSR; |
| |
| /** Offset 0x0B88 - Reserved |
| **/ |
| UINT8 Reserved56[2]; |
| |
| /** Offset 0x0B8A - DIMM CA ODT Training |
| Enable/Disable DIMM CA ODT Training |
| $EN_DIS |
| **/ |
| UINT8 DIMMODTCA; |
| |
| /** Offset 0x0B8B - Reserved |
| **/ |
| UINT8 Reserved57[3]; |
| |
| /** Offset 0x0B8E - Read Vref Decap Training |
| Enable/Disable Read Vref Decap Training |
| $EN_DIS |
| **/ |
| UINT8 RDVREFDC; |
| |
| /** Offset 0x0B8F - Vddq Training |
| Enable/Disable Vddq Training |
| $EN_DIS |
| **/ |
| UINT8 VDDQT; |
| |
| /** Offset 0x0B90 - Rank Margin Tool Per Bit |
| Enable/Disable Rank Margin Tool Per Bit |
| $EN_DIS |
| **/ |
| UINT8 RMTBIT; |
| |
| /** Offset 0x0B91 - Reserved |
| **/ |
| UINT8 Reserved58[4]; |
| |
| /** Offset 0x0B95 - Duty Cycle Correction Training |
| Enable/Disable Duty Cycle Correction Training |
| $EN_DIS |
| **/ |
| UINT8 DCC; |
| |
| /** Offset 0x0B96 - Reserved |
| **/ |
| UINT8 Reserved59[17]; |
| |
| /** Offset 0x0BA7 - ECC Support |
| Enables/Disable ECC Support |
| $EN_DIS |
| **/ |
| UINT8 EccSupport; |
| |
| /** Offset 0x0BA8 - Ibecc |
| In-Band ECC Support |
| $EN_DIS |
| **/ |
| UINT8 Ibecc; |
| |
| /** Offset 0x0BA9 - IbeccParity |
| In-Band ECC Parity Control |
| $EN_DIS |
| **/ |
| UINT8 IbeccParity; |
| |
| /** Offset 0x0BAA - IbeccOperationMode |
| In-Band ECC Operation Mode |
| 0:Protect base on address range, 1: Non-protected, 2: All protected |
| **/ |
| UINT8 IbeccOperationMode; |
| |
| /** Offset 0x0BAB - IbeccProtectedRegionEnable |
| In-Band ECC Protected Region Enable |
| $EN_DIS |
| **/ |
| UINT8 IbeccProtectedRegionEnable[8]; |
| |
| /** Offset 0x0BB3 - Reserved |
| **/ |
| UINT8 Reserved60; |
| |
| /** Offset 0x0BB4 - IbeccProtectedRegionBases |
| IBECC Protected Region Bases per IBECC instance |
| **/ |
| UINT16 IbeccProtectedRegionBase[8]; |
| |
| /** Offset 0x0BC4 - IbeccProtectedRegionMasks |
| IBECC Protected Region Masks |
| **/ |
| UINT16 IbeccProtectedRegionMask[8]; |
| |
| /** Offset 0x0BD4 - IbeccProtectedRegionOverallBases |
| IBECC Protected Region Bases based on enabled IBECC instance |
| **/ |
| UINT16 IbeccProtectedRegionOverallBase[8]; |
| |
| /** Offset 0x0BE4 - Memory Remap |
| Enables/Disable Memory Remap |
| $EN_DIS |
| **/ |
| UINT8 RemapEnable; |
| |
| /** Offset 0x0BE5 - Rank Interleave support |
| Enables/Disable Rank Interleave support. NOTE: RI and HORI can not be enabled at |
| the same time. |
| $EN_DIS |
| **/ |
| UINT8 RankInterleave; |
| |
| /** Offset 0x0BE6 - Enhanced Interleave support |
| Enables/Disable Enhanced Interleave support |
| $EN_DIS |
| **/ |
| UINT8 EnhancedInterleave; |
| |
| /** Offset 0x0BE7 - Ch Hash Support |
| Enable/Disable Channel Hash Support. NOTE: ONLY if Memory interleaved Mode |
| $EN_DIS |
| **/ |
| UINT8 ChHashEnable; |
| |
| /** Offset 0x0BE8 - Extern Therm Status |
| Enables/Disable Extern Therm Status |
| $EN_DIS |
| **/ |
| UINT8 EnableExtts; |
| |
| /** Offset 0x0BE9 - DDR PowerDown and idle counter |
| Enables/Disable DDR PowerDown and idle counter(For LPDDR Only) |
| $EN_DIS |
| **/ |
| UINT8 EnablePwrDn; |
| |
| /** Offset 0x0BEA - DDR PowerDown and idle counter |
| Enables/Disable DDR PowerDown and idle counter(For LPDDR Only) |
| $EN_DIS |
| **/ |
| UINT8 EnablePwrDnLpddr; |
| |
| /** Offset 0x0BEB - SelfRefresh Enable |
| Enables/Disable SelfRefresh Enable |
| $EN_DIS |
| **/ |
| UINT8 SrefCfgEna; |
| |
| /** Offset 0x0BEC - Throttler CKEMin Defeature |
| Enables/Disable Throttler CKEMin Defeature(For LPDDR Only) |
| $EN_DIS |
| **/ |
| UINT8 ThrtCkeMinDefeatLpddr; |
| |
| /** Offset 0x0BED - Throttler CKEMin Defeature |
| Enables/Disable Throttler CKEMin Defeature |
| $EN_DIS |
| **/ |
| UINT8 ThrtCkeMinDefeat; |
| |
| /** Offset 0x0BEE - Reserved |
| **/ |
| UINT8 Reserved61; |
| |
| /** Offset 0x0BEF - Exit On Failure (MRC) |
| Enables/Disable Exit On Failure (MRC) |
| $EN_DIS |
| **/ |
| UINT8 ExitOnFailure; |
| |
| /** Offset 0x0BF0 - Reserved |
| **/ |
| UINT8 Reserved62[4]; |
| |
| /** Offset 0x0BF4 - Select if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP |
| ESelect if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP |
| $EN_DIS |
| **/ |
| UINT8 Ddr4DdpSharedZq; |
| |
| /** Offset 0x0BF5 - Ch Hash Interleaved Bit |
| Select the BIT to be used for Channel Interleaved mode. NOTE: BIT7 will interlave |
| the channels at a 2 cacheline granularity, BIT8 at 4 and BIT9 at 8. Default is BIT8 |
| 0:BIT6, 1:BIT7, 2:BIT8, 3:BIT9, 4:BIT10, 5:BIT11, 6:BIT12, 7:BIT13 |
| **/ |
| UINT8 ChHashInterleaveBit; |
| |
| /** Offset 0x0BF6 - Ch Hash Mask |
| Set the BIT(s) to be included in the XOR function. NOTE BIT mask corresponds to |
| BITS [19:6] Default is 0x30CC |
| **/ |
| UINT16 ChHashMask; |
| |
| /** Offset 0x0BF8 - Base reference clock value |
| Base reference clock value, in Hertz(Default is 125Hz) |
| 100000000:100Hz, 125000000:125Hz, 167000000:167Hz, 250000000:250Hz |
| **/ |
| UINT32 BClkFrequency; |
| |
| /** Offset 0x0BFC - EPG DIMM Idd3N |
| Active standby current (Idd3N) in milliamps from datasheet. Must be calculated on |
| a per DIMM basis. Default is 26 |
| **/ |
| UINT16 Idd3n; |
| |
| /** Offset 0x0BFE - EPG DIMM Idd3P |
| Active power-down current (Idd3P) in milliamps from datasheet. Must be calculated |
| on a per DIMM basis. Default is 11 |
| **/ |
| UINT16 Idd3p; |
| |
| /** Offset 0x0C00 - CMD Normalization |
| Enable/Disable CMD Normalization |
| $EN_DIS |
| **/ |
| UINT8 CMDNORM; |
| |
| /** Offset 0x0C01 - Early DQ Write Drive Strength and Equalization Training |
| Enable/Disable Early DQ Write Drive Strength and Equalization Training |
| $EN_DIS |
| **/ |
| UINT8 EWRDSEQ; |
| |
| /** Offset 0x0C02 - Idle Energy Mc0Ch0Dimm0 |
| Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) |
| **/ |
| UINT8 IdleEnergyMc0Ch0Dimm0; |
| |
| /** Offset 0x0C03 - Idle Energy Mc0Ch0Dimm1 |
| Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) |
| **/ |
| UINT8 IdleEnergyMc0Ch0Dimm1; |
| |
| /** Offset 0x0C04 - Idle Energy Mc0Ch1Dimm0 |
| Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) |
| **/ |
| UINT8 IdleEnergyMc0Ch1Dimm0; |
| |
| /** Offset 0x0C05 - Idle Energy Mc0Ch1Dimm1 |
| Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) |
| **/ |
| UINT8 IdleEnergyMc0Ch1Dimm1; |
| |
| /** Offset 0x0C06 - Idle Energy Mc1Ch0Dimm0 |
| Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) |
| **/ |
| UINT8 IdleEnergyMc1Ch0Dimm0; |
| |
| /** Offset 0x0C07 - Idle Energy Mc1Ch0Dimm1 |
| Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) |
| **/ |
| UINT8 IdleEnergyMc1Ch0Dimm1; |
| |
| /** Offset 0x0C08 - Idle Energy Mc1Ch1Dimm0 |
| Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) |
| **/ |
| UINT8 IdleEnergyMc1Ch1Dimm0; |
| |
| /** Offset 0x0C09 - Idle Energy Mc1Ch1Dimm1 |
| Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) |
| **/ |
| UINT8 IdleEnergyMc1Ch1Dimm1; |
| |
| /** Offset 0x0C0A - PowerDown Energy Mc0Ch0Dimm0 |
| PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) |
| **/ |
| UINT8 PdEnergyMc0Ch0Dimm0; |
| |
| /** Offset 0x0C0B - PowerDown Energy Mc0Ch0Dimm1 |
| PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) |
| **/ |
| UINT8 PdEnergyMc0Ch0Dimm1; |
| |
| /** Offset 0x0C0C - PowerDown Energy Mc0Ch1Dimm0 |
| PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) |
| **/ |
| UINT8 PdEnergyMc0Ch1Dimm0; |
| |
| /** Offset 0x0C0D - PowerDown Energy Mc0Ch1Dimm1 |
| PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) |
| **/ |
| UINT8 PdEnergyMc0Ch1Dimm1; |
| |
| /** Offset 0x0C0E - PowerDown Energy Mc1Ch0Dimm0 |
| PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) |
| **/ |
| UINT8 PdEnergyMc1Ch0Dimm0; |
| |
| /** Offset 0x0C0F - PowerDown Energy Mc1Ch0Dimm1 |
| PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) |
| **/ |
| UINT8 PdEnergyMc1Ch0Dimm1; |
| |
| /** Offset 0x0C10 - PowerDown Energy Mc1Ch1Dimm0 |
| PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) |
| **/ |
| UINT8 PdEnergyMc1Ch1Dimm0; |
| |
| /** Offset 0x0C11 - PowerDown Energy Mc1Ch1Dimm1 |
| PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) |
| **/ |
| UINT8 PdEnergyMc1Ch1Dimm1; |
| |
| /** Offset 0x0C12 - Activate Energy Mc0Ch0Dimm0 |
| Activate Energy Contribution, range[255;0],(172= Def) |
| **/ |
| UINT8 ActEnergyMc0Ch0Dimm0; |
| |
| /** Offset 0x0C13 - Activate Energy Mc0Ch0Dimm1 |
| Activate Energy Contribution, range[255;0],(172= Def) |
| **/ |
| UINT8 ActEnergyMc0Ch0Dimm1; |
| |
| /** Offset 0x0C14 - Activate Energy Mc0Ch1Dimm0 |
| Activate Energy Contribution, range[255;0],(172= Def) |
| **/ |
| UINT8 ActEnergyMc0Ch1Dimm0; |
| |
| /** Offset 0x0C15 - Activate Energy Mc0Ch1Dimm1 |
| Activate Energy Contribution, range[255;0],(172= Def) |
| **/ |
| UINT8 ActEnergyMc0Ch1Dimm1; |
| |
| /** Offset 0x0C16 - Activate Energy Mc1Ch0Dimm0 |
| Activate Energy Contribution, range[255;0],(172= Def) |
| **/ |
| UINT8 ActEnergyMc1Ch0Dimm0; |
| |
| /** Offset 0x0C17 - Activate Energy Mc1Ch0Dimm1 |
| Activate Energy Contribution, range[255;0],(172= Def) |
| **/ |
| UINT8 ActEnergyMc1Ch0Dimm1; |
| |
| /** Offset 0x0C18 - Activate Energy Mc1Ch1Dimm0 |
| Activate Energy Contribution, range[255;0],(172= Def) |
| **/ |
| UINT8 ActEnergyMc1Ch1Dimm0; |
| |
| /** Offset 0x0C19 - Activate Energy Mc1Ch1Dimm1 |
| Activate Energy Contribution, range[255;0],(172= Def) |
| **/ |
| UINT8 ActEnergyMc1Ch1Dimm1; |
| |
| /** Offset 0x0C1A - Read Energy Mc0Ch0Dimm0 |
| Read Energy Contribution, range[255;0],(212= Def) |
| **/ |
| UINT8 RdEnergyMc0Ch0Dimm0; |
| |
| /** Offset 0x0C1B - Read Energy Mc0Ch0Dimm1 |
| Read Energy Contribution, range[255;0],(212= Def) |
| **/ |
| UINT8 RdEnergyMc0Ch0Dimm1; |
| |
| /** Offset 0x0C1C - Read Energy Mc0Ch1Dimm0 |
| Read Energy Contribution, range[255;0],(212= Def) |
| **/ |
| UINT8 RdEnergyMc0Ch1Dimm0; |
| |
| /** Offset 0x0C1D - Read Energy Mc0Ch1Dimm1 |
| Read Energy Contribution, range[255;0],(212= Def) |
| **/ |
| UINT8 RdEnergyMc0Ch1Dimm1; |
| |
| /** Offset 0x0C1E - Read Energy Mc1Ch0Dimm0 |
| Read Energy Contribution, range[255;0],(212= Def) |
| **/ |
| UINT8 RdEnergyMc1Ch0Dimm0; |
| |
| /** Offset 0x0C1F - Read Energy Mc1Ch0Dimm1 |
| Read Energy Contribution, range[255;0],(212= Def) |
| **/ |
| UINT8 RdEnergyMc1Ch0Dimm1; |
| |
| /** Offset 0x0C20 - Read Energy Mc1Ch1Dimm0 |
| Read Energy Contribution, range[255;0],(212= Def) |
| **/ |
| UINT8 RdEnergyMc1Ch1Dimm0; |
| |
| /** Offset 0x0C21 - Read Energy Mc1Ch1Dimm1 |
| Read Energy Contribution, range[255;0],(212= Def) |
| **/ |
| UINT8 RdEnergyMc1Ch1Dimm1; |
| |
| /** Offset 0x0C22 - Write Energy Mc0Ch0Dimm0 |
| Write Energy Contribution, range[255;0],(221= Def) |
| **/ |
| UINT8 WrEnergyMc0Ch0Dimm0; |
| |
| /** Offset 0x0C23 - Write Energy Mc0Ch0Dimm1 |
| Write Energy Contribution, range[255;0],(221= Def) |
| **/ |
| UINT8 WrEnergyMc0Ch0Dimm1; |
| |
| /** Offset 0x0C24 - Write Energy Mc0Ch1Dimm0 |
| Write Energy Contribution, range[255;0],(221= Def) |
| **/ |
| UINT8 WrEnergyMc0Ch1Dimm0; |
| |
| /** Offset 0x0C25 - Write Energy Mc0Ch1Dimm1 |
| Write Energy Contribution, range[255;0],(221= Def) |
| **/ |
| UINT8 WrEnergyMc0Ch1Dimm1; |
| |
| /** Offset 0x0C26 - Write Energy Mc1Ch0Dimm0 |
| Write Energy Contribution, range[255;0],(221= Def) |
| **/ |
| UINT8 WrEnergyMc1Ch0Dimm0; |
| |
| /** Offset 0x0C27 - Write Energy Mc1Ch0Dimm1 |
| Write Energy Contribution, range[255;0],(221= Def) |
| **/ |
| UINT8 WrEnergyMc1Ch0Dimm1; |
| |
| /** Offset 0x0C28 - Write Energy Mc1Ch1Dimm0 |
| Write Energy Contribution, range[255;0],(221= Def) |
| **/ |
| UINT8 WrEnergyMc1Ch1Dimm0; |
| |
| /** Offset 0x0C29 - Write Energy Mc1Ch1Dimm1 |
| Write Energy Contribution, range[255;0],(221= Def) |
| **/ |
| UINT8 WrEnergyMc1Ch1Dimm1; |
| |
| /** Offset 0x0C2A - Throttler CKEMin Timer |
| Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH (4). |
| Dfault is 0x00 |
| **/ |
| UINT8 ThrtCkeMinTmr; |
| |
| /** Offset 0x0C2B - Reserved |
| **/ |
| UINT8 Reserved63[2]; |
| |
| /** Offset 0x0C2D - Rapl Power Floor Ch0 |
| Power budget ,range[255;0],(0= 5.3W Def) |
| **/ |
| UINT8 RaplPwrFlCh0; |
| |
| /** Offset 0x0C2E - Rapl Power Floor Ch1 |
| Power budget ,range[255;0],(0= 5.3W Def) |
| **/ |
| UINT8 RaplPwrFlCh1; |
| |
| /** Offset 0x0C2F - Command Rate Support |
| CMD Rate and Limit Support Option. NOTE: ONLY supported in 1N Mode, Default is 3 CMDs |
| 0:Disable, 5:2 CMDS, 7:3 CMDS, 9:4 CMDS, 11:5 CMDS, 13:6 CMDS, 15:7 CMDS |
| **/ |
| UINT8 EnCmdRate; |
| |
| /** Offset 0x0C30 - Reserved |
| **/ |
| UINT8 Reserved64; |
| |
| /** Offset 0x0C31 - Energy Performance Gain |
| Enable/disable Energy Performance Gain. <b>0: Disable</b>; 1: Enable |
| $EN_DIS |
| **/ |
| UINT8 EpgEnable; |
| |
| /** Offset 0x0C32 - Reserved |
| **/ |
| UINT8 Reserved65; |
| |
| /** Offset 0x0C33 - User Manual Threshold |
| Disabled: Predefined threshold will be used.\n |
| Enabled: User Input will be used. |
| $EN_DIS |
| **/ |
| UINT8 UserThresholdEnable; |
| |
| /** Offset 0x0C34 - User Manual Budget |
| Disabled: Configuration of memories will defined the Budget value.\n |
| Enabled: User Input will be used. |
| $EN_DIS |
| **/ |
| UINT8 UserBudgetEnable; |
| |
| /** Offset 0x0C35 - Reserved |
| **/ |
| UINT8 Reserved66; |
| |
| /** Offset 0x0C36 - Power Down Mode |
| This option controls command bus tristating during idle periods |
| 0x0:No Power Down, 0x1:APD, 0x6:PPD DLL OFF, 0xFF:Auto |
| **/ |
| UINT8 PowerDownMode; |
| |
| /** Offset 0x0C37 - Pwr Down Idle Timer |
| The minimum value should = to the worst case Roundtrip delay + Burst_Length. 0 means |
| AUTO: 64 for ULX/ULT, 128 for DT/Halo |
| **/ |
| UINT8 PwdwnIdleCounter; |
| |
| /** Offset 0x0C38 - Page Close Idle Timeout |
| This option controls Page Close Idle Timeout |
| 0:Enabled, 1:Disabled |
| **/ |
| UINT8 DisPgCloseIdleTimeout; |
| |
| /** Offset 0x0C39 - Bitmask of ranks that have CA bus terminated |
| Offset 225 LPDDR4: Bitmask of ranks that have CA bus terminated. <b>0x01=Default, |
| Rank0 is terminating and Rank1 is non-terminating</b> |
| **/ |
| UINT8 CmdRanksTerminated; |
| |
| /** Offset 0x0C3A - PcdSerialDebugLevel |
| Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, |
| Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, |
| Info & Verbose. |
| 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load |
| Error Warnings and Info & Event, 5:Load Error Warnings Info and Verbose |
| **/ |
| UINT8 PcdSerialDebugLevel; |
| |
| /** Offset 0x0C3B - Reserved |
| **/ |
| UINT8 Reserved67[8]; |
| |
| /** Offset 0x0C43 - Ask MRC to clear memory content |
| Ask MRC to clear memory content <b>0: Do not Clear Memory;</b> 1: Clear Memory. |
| $EN_DIS |
| **/ |
| UINT8 CleanMemory; |
| |
| /** Offset 0x0C44 - TCSS USB Port Enable |
| Bitmap for per port enabling |
| **/ |
| UINT8 UsbTcPortEnPreMem; |
| |
| /** Offset 0x0C45 - Reserved |
| **/ |
| UINT8 Reserved68; |
| |
| /** Offset 0x0C46 - Post Code Output Port |
| This option configures Post Code Output Port |
| **/ |
| UINT16 PostCodeOutputPort; |
| |
| /** Offset 0x0C48 - RMTLoopCount |
| Specifies the Loop Count to be used during Rank Margin Tool Testing. 0 - AUTO |
| **/ |
| UINT8 RMTLoopCount; |
| |
| /** Offset 0x0C49 - Enable/Disable SA CRID |
| Enable: SA CRID, Disable (Default): SA CRID |
| $EN_DIS |
| **/ |
| UINT8 CridEnable; |
| |
| /** Offset 0x0C4A - Reserved |
| **/ |
| UINT8 Reserved69[2]; |
| |
| /** Offset 0x0C4C - BCLK RFI Frequency |
| Bclk RFI Frequency for each SAGV point in Hz units. 98000000Hz = 98MHz <b>0 - No |
| RFI Tuning</b>. Range is 98Mhz-100Mhz. |
| **/ |
| UINT32 BclkRfiFreq[4]; |
| |
| /** Offset 0x0C5C - Size of PCIe IMR. |
| Size of PCIe IMR in megabytes |
| **/ |
| UINT16 PcieImrSize; |
| |
| /** Offset 0x0C5E - Enable PCIe IMR |
| 0: Disable(AUTO), 1: Enable |
| $EN_DIS |
| **/ |
| UINT8 PcieImrEnabled; |
| |
| /** Offset 0x0C5F - Enable PCIe IMR |
| 1: PCH PCIE, 2: SA PCIE. If PCIeImrEnabled is TRUE then this will use to select |
| the Root port location from PCH PCIe or SA PCIe |
| $EN_DIS |
| **/ |
| UINT8 PcieImrRpLocation; |
| |
| /** Offset 0x0C60 - Root port number for IMR. |
| Root port number for IMR.If PCieImrRpLocation is PCH PCIe then select root port |
| from 0 to 23 and if it is SA PCIe then select root port from 0 to 3 |
| **/ |
| UINT8 PcieImrRpSelection; |
| |
| /** Offset 0x0C61 - SerialDebugMrcLevel |
| MRC Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, |
| Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, |
| Info & Verbose. |
| 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load |
| Error Warnings and Info & Event, 5:Load Error Warnings Info and Verbose |
| **/ |
| UINT8 SerialDebugMrcLevel; |
| |
| /** Offset 0x0C62 - Reserved |
| **/ |
| UINT8 Reserved70[13]; |
| |
| /** Offset 0x0C6F - Command Pins Mapping |
| BitMask where bits [3:0] are Controller 0 Channel [3:0] and bits [7:4] are Controller |
| 1 Channel [3:0]. 0 = CCC pin mapping is Ascending, 1 = CCC pin mapping is Descending. |
| **/ |
| UINT8 Lp5CccConfig; |
| |
| /** Offset 0x0C70 - Command Pins Mirrored |
| BitMask where bits [3:0] are Controller 0 Channel [3:0] and bits [7:4] are Controller |
| 1 Channel [3:0]. 0 = No Command Mirror and 1 = Command Mirror. |
| **/ |
| UINT8 CmdMirror; |
| |
| /** Offset 0x0C71 - Reserved |
| **/ |
| UINT8 Reserved71[24]; |
| |
| /** Offset 0x0C89 - Skip external display device scanning |
| Enable: Do not scan for external display device, Disable (Default): Scan external |
| display devices |
| $EN_DIS |
| **/ |
| UINT8 SkipExtGfxScan; |
| |
| /** Offset 0x0C8A - Generate BIOS Data ACPI Table |
| Enable: Generate BDAT for MRC RMT or SA PCIe data. Disable (Default): Do not generate it |
| $EN_DIS |
| **/ |
| UINT8 BdatEnable; |
| |
| /** Offset 0x0C8B - Lock PCU Thermal Management registers |
| Lock PCU Thermal Management registers. Enable(Default)=1, Disable=0 |
| $EN_DIS |
| **/ |
| UINT8 LockPTMregs; |
| |
| /** Offset 0x0C8C - Panel Power Enable |
| Control for enabling/disabling VDD force bit (Required only for early enabling of |
| eDP panel). 0=Disable, 1(Default)=Enable |
| $EN_DIS |
| **/ |
| UINT8 PanelPowerEnable; |
| |
| /** Offset 0x0C8D - BdatTestType |
| Indicates the type of Memory Training data to populate into the BDAT ACPI table. |
| 0:RMT per Rank, 1:RMT per Bit, 2:Margin2D |
| **/ |
| UINT8 BdatTestType; |
| |
| /** Offset 0x0C8E - Reserved |
| **/ |
| UINT8 Reserved72[2]; |
| |
| /** Offset 0x0C90 - PMR Size |
| Size of PMR memory buffer. 0x400000 for normal boot and 0x200000 for S3 boot |
| **/ |
| UINT32 DmaBufferSize; |
| |
| /** Offset 0x0C94 - The policy for VTd driver behavior |
| BIT0: Enable IOMMU during boot, BIT1: Enable IOMMU when transfer control to OS |
| **/ |
| UINT8 PreBootDmaMask; |
| |
| /** Offset 0x0C95 - Reserved |
| **/ |
| UINT8 Reserved73[143]; |
| |
| /** Offset 0x0D24 - TotalFlashSize |
| Enable/Disable. 0: Disable, define default value of TotalFlashSize , 1: enable |
| **/ |
| UINT16 TotalFlashSize; |
| |
| /** Offset 0x0D26 - BiosSize |
| The size of the BIOS region of the IFWI. Used if FspmUpd->FspmConfig.BiosGuard != |
| 0. If BiosGuard is enabled, MRC will increase the size of the DPR (DMA Protected |
| Range) so that a BIOS Update Script can be stored in the DPR. |
| **/ |
| UINT16 BiosSize; |
| |
| /** Offset 0x0D28 - Reserved |
| **/ |
| UINT8 Reserved74[28]; |
| |
| /** Offset 0x0D44 - Smbus dynamic power gating |
| Disable or Enable Smbus dynamic power gating. |
| $EN_DIS |
| **/ |
| UINT8 SmbusDynamicPowerGating; |
| |
| /** Offset 0x0D45 - Disable and Lock Watch Dog Register |
| Set 1 to clear WDT status, then disable and lock WDT registers. |
| $EN_DIS |
| **/ |
| UINT8 WdtDisableAndLock; |
| |
| /** Offset 0x0D46 - Reserved |
| **/ |
| UINT8 Reserved75[2]; |
| |
| /** Offset 0x0D48 - SMBUS SPD Write Disable |
| Set/Clear Smbus SPD Write Disable. 0: leave SPD Write Disable bit; 1: set SPD Write |
| Disable bit. For security recommendations, SPD write disable bit must be set. |
| $EN_DIS |
| **/ |
| UINT8 SmbusSpdWriteDisable; |
| |
| /** Offset 0x0D49 - Reserved |
| **/ |
| UINT8 Reserved76[34]; |
| |
| /** Offset 0x0D6B - HECI Timeouts |
| 0: Disable, 1: Enable (Default) timeout check for HECI |
| $EN_DIS |
| **/ |
| UINT8 HeciTimeouts; |
| |
| /** Offset 0x0D6C - Force ME DID Init Status |
| Test, 0: disable, 1: Success, 2: No Memory in Channels, 3: Memory Init Error, Set |
| ME DID init stat value |
| $EN_DIS |
| **/ |
| UINT8 DidInitStat; |
| |
| /** Offset 0x0D6D - CPU Replaced Polling Disable |
| Test, 0: disable, 1: enable, Setting this option disables CPU replacement polling loop |
| $EN_DIS |
| **/ |
| UINT8 DisableCpuReplacedPolling; |
| |
| /** Offset 0x0D6E - Check HECI message before send |
| Test, 0: disable, 1: enable, Enable/Disable message check. |
| $EN_DIS |
| **/ |
| UINT8 DisableMessageCheck; |
| |
| /** Offset 0x0D6F - Skip MBP HOB |
| Test, 0: disable, 1: enable, Enable/Disable sending MBP message and creating MBP Hob. |
| $EN_DIS |
| **/ |
| UINT8 SkipMbpHob; |
| |
| /** Offset 0x0D70 - HECI2 Interface Communication |
| Test, 0: disable, 1: enable, Adds or Removes HECI2 Device from PCI space. |
| $EN_DIS |
| **/ |
| UINT8 HeciCommunication2; |
| |
| /** Offset 0x0D71 - Enable KT device |
| Test, 0: POR, 1: enable, 2: disable, Enable or Disable KT device. |
| $EN_DIS |
| **/ |
| UINT8 KtDeviceEnable; |
| |
| /** Offset 0x0D72 - Skip CPU replacement check |
| Test, 0: disable, 1: enable, Setting this option to skip CPU replacement check |
| $EN_DIS |
| **/ |
| UINT8 SkipCpuReplacementCheck; |
| |
| /** Offset 0x0D73 - Reserved |
| **/ |
| UINT8 Reserved77[100]; |
| |
| /** Offset 0x0DD7 - Avx2 Voltage Guardband Scaling Factor |
| AVX2 Voltage Guardband Scale factor applied to AVX2 workloads. Range is 0-200 in |
| 1/100 units, where a value of 125 would apply a 1.25 scale factor. |
| **/ |
| UINT8 Avx2VoltageScaleFactor; |
| |
| /** Offset 0x0DD8 - Avx512 Voltage Guardband Scaling Factor |
| AVX512 Voltage Guardband Scale factor applied to AVX512 workloads. Range is 0-200 |
| in 1/100 units, where a value of 125 would apply a 1.25 scale factor. |
| **/ |
| UINT8 Avx512VoltageScaleFactor; |
| |
| /** Offset 0x0DD9 - Serial Io Uart Debug Mode |
| Select SerialIo Uart Controller mode |
| 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom, |
| 4:SerialIoUartSkipInit |
| **/ |
| UINT8 SerialIoUartDebugMode; |
| |
| /** Offset 0x0DDA - Reserved |
| **/ |
| UINT8 Reserved78[2]; |
| |
| /** Offset 0x0DDC - SerialIoUartDebugRxPinMux - FSPM |
| Select RX pin muxing for SerialIo UART used for debug |
| **/ |
| UINT32 SerialIoUartDebugRxPinMux; |
| |
| /** Offset 0x0DE0 - SerialIoUartDebugTxPinMux - FSPM |
| Select TX pin muxing for SerialIo UART used for debug |
| **/ |
| UINT32 SerialIoUartDebugTxPinMux; |
| |
| /** Offset 0x0DE4 - SerialIoUartDebugRtsPinMux - FSPM |
| Select SerialIo Uart used for debug Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS* |
| for possible values. |
| **/ |
| UINT32 SerialIoUartDebugRtsPinMux; |
| |
| /** Offset 0x0DE8 - SerialIoUartDebugCtsPinMux - FSPM |
| Select SerialIo Uart used for debug Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS* |
| for possible values. |
| **/ |
| UINT32 SerialIoUartDebugCtsPinMux; |
| |
| /** Offset 0x0DEC - Reserved |
| **/ |
| UINT8 Reserved79[172]; |
| } FSP_M_CONFIG; |
| |
| /** Fsp M UPD Configuration |
| **/ |
| typedef struct { |
| |
| /** Offset 0x0000 |
| **/ |
| FSP_UPD_HEADER FspUpdHeader; |
| |
| /** Offset 0x0020 |
| **/ |
| FSPM_ARCH_UPD FspmArchUpd; |
| |
| /** Offset 0x0040 |
| **/ |
| FSP_M_CONFIG FspmConfig; |
| |
| /** Offset 0x0E98 |
| **/ |
| UINT8 Rsvd500[6]; |
| |
| /** Offset 0x0E9E |
| **/ |
| UINT16 UpdTerminator; |
| } FSPM_UPD; |
| |
| #pragma pack() |
| |
| #endif |