| config BOARD_PURISM_BASEBOARD_LIBREM_CNL |
| def_bool n |
| select BOARD_ROMSIZE_KB_16384 |
| select DRIVERS_GENERIC_CBFS_SERIAL |
| select DRIVERS_USB_ACPI |
| select HAVE_ACPI_RESUME |
| select HAVE_ACPI_TABLES |
| select INTEL_GMA_HAVE_VBT |
| select MAINBOARD_HAS_LIBGFXINIT |
| select NO_UART_ON_SUPERIO |
| select SOC_INTEL_COMMON_BLOCK_HDA_VERB |
| select SPD_CACHE_IN_FMAP |
| select SPD_READ_BY_WORD |
| select USE_LEGACY_8254_TIMER |
| |
| config BOARD_PURISM_LIBREM_MINI |
| select BOARD_PURISM_BASEBOARD_LIBREM_CNL |
| select HAVE_CMOS_DEFAULT |
| select HAVE_OPTION_TABLE |
| select SOC_INTEL_WHISKEYLAKE |
| select SUPERIO_ITE_IT8528E |
| |
| config BOARD_PURISM_LIBREM_MINI_V2 |
| select BOARD_PURISM_BASEBOARD_LIBREM_CNL |
| select HAVE_CMOS_DEFAULT |
| select HAVE_OPTION_TABLE |
| select SOC_INTEL_COMETLAKE_1 |
| select SUPERIO_ITE_IT8528E |
| |
| config BOARD_PURISM_LIBREM_14 |
| select BOARD_PURISM_BASEBOARD_LIBREM_CNL |
| select DRIVERS_I2C_HID |
| select EC_LIBREM_EC |
| select MEMORY_MAPPED_TPM |
| select MAINBOARD_HAS_TPM1 |
| select SOC_INTEL_COMETLAKE_1_2 |
| select SYSTEM_TYPE_LAPTOP |
| |
| if BOARD_PURISM_BASEBOARD_LIBREM_CNL |
| |
| config MAINBOARD_DIR |
| default "purism/librem_cnl" |
| |
| config MAINBOARD_FAMILY |
| string |
| default "Librem Mini" if BOARD_PURISM_LIBREM_MINI || BOARD_PURISM_LIBREM_MINI_V2 |
| default "Librem 14" if BOARD_PURISM_LIBREM_14 |
| |
| config MAINBOARD_PART_NUMBER |
| default "Librem Mini" if BOARD_PURISM_LIBREM_MINI |
| default "Librem Mini v2" if BOARD_PURISM_LIBREM_MINI_V2 |
| default "Librem 14" if BOARD_PURISM_LIBREM_14 |
| |
| config VARIANT_DIR |
| default "librem_mini" if BOARD_PURISM_LIBREM_MINI || BOARD_PURISM_LIBREM_MINI_V2 |
| default "librem_14" if BOARD_PURISM_LIBREM_14 |
| |
| config OVERRIDE_DEVICETREE |
| default "variants/\$(CONFIG_VARIANT_DIR)/overridetree.cb" |
| |
| config CBFS_SIZE |
| default 0x800000 if BOARD_PURISM_LIBREM_MINI |
| default 0xA00000 if BOARD_PURISM_LIBREM_MINI_V2 |
| default 0x900000 if BOARD_PURISM_LIBREM_14 |
| |
| config DIMM_MAX |
| default 2 |
| |
| config DIMM_SPD_SIZE |
| default 512 |
| |
| config VGA_BIOS_ID |
| string |
| default "8086,3ea0" if BOARD_PURISM_LIBREM_MINI |
| default "8086,9b41" if BOARD_PURISM_LIBREM_MINI_V2 || BOARD_PURISM_LIBREM_14 |
| |
| config PXE_ROM_ID |
| string |
| default "10ec,8168" |
| |
| # This platform has limited means to display POST codes |
| config NO_POST |
| default y |
| |
| endif |
| |
| if BOARD_PURISM_LIBREM_MINI || BOARD_PURISM_LIBREM_MINI_V2 |
| |
| config PC_CMOS_BASE_PORT_BANK1 |
| default 0x360 |
| |
| config CMOS_LAYOUT_FILE |
| default "src/mainboard/\$(MAINBOARDDIR)/variants/librem_mini/cmos.layout" |
| |
| config CMOS_DEFAULT_FILE |
| default "src/mainboard/\$(MAINBOARDDIR)/variants/librem_mini/cmos.default" |
| |
| endif |
| |
| config ENABLE_EC_UART1 |
| bool "Enable EC UART1" |
| depends on BOARD_PURISM_LIBREM_MINI || BOARD_PURISM_LIBREM_MINI_V2 |
| default n |
| select DRIVERS_UART_8250IO |
| help |
| Enable UART1 on the EC. |
| |
| This UART can be used for boot logging by coreboot, SeaBIOS, or |
| Linux. It also works as a general-purpose UART. |
| |
| Soldering is required to access these signals. Locate the pads for |
| U81 on the bottom of the board near the front edge; the IC is not |
| populated. TX is pin 14, RX is pin 19. The signals are 3.3V (do NOT |
| connect directly to an RS-232 serial port). |
| |
| config EDK2_BOOT_TIMEOUT |
| int |
| default 4 if BOARD_PURISM_LIBREM_MINI || BOARD_PURISM_LIBREM_MINI_V2 |