| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| /* |
| * Helper functions for dealing with power management registers |
| * and the differences between PCH variants. |
| */ |
| |
| #define __SIMPLE_DEVICE__ |
| |
| #include <console/console.h> |
| #include <device/pci.h> |
| #include <intelblocks/pmclib.h> |
| #include <intelblocks/rtc.h> |
| #include <soc/pci_devs.h> |
| #include <soc/pm.h> |
| #include <soc/pmc.h> |
| |
| uint8_t *pmc_mmio_regs(void) |
| { |
| return (void *)(uintptr_t)pci_read_config32(PCH_DEV_PMC, PWRMBASE); |
| } |
| |
| uintptr_t soc_read_pmc_base(void) |
| { |
| return (uintptr_t)(pmc_mmio_regs()); |
| } |
| |
| uint32_t *soc_pmc_etr_addr(void) |
| { |
| /* |
| * The pointer returned must not be cached, because the address depends on the |
| * MMCONF base address and the assigned PCI bus number, which both may change |
| * during the boot process! |
| */ |
| return pci_mmio_config32_addr(PCH_DEVFN_PMC << 12, ETR); |
| } |
| |
| int soc_get_rtc_failed(void) |
| { |
| uint32_t pmcon_b = pci_s_read_config32(PCH_DEV_PMC, GEN_PMCON_B); |
| int rtc_fail = !!(pmcon_b & RTC_BATTERY_DEAD); |
| |
| if (rtc_fail) |
| printk(BIOS_ERR, "%s: RTC battery dead or removed\n", __func__); |
| |
| return rtc_fail; |
| } |
| |
| void soc_fill_power_state(struct chipset_power_state *ps) |
| { |
| uint8_t *pmc; |
| |
| ps->gen_pmcon_a = pci_read_config32(PCH_DEV_PMC, GEN_PMCON_A); |
| ps->gen_pmcon_b = pci_read_config32(PCH_DEV_PMC, GEN_PMCON_B); |
| |
| pmc = pmc_mmio_regs(); |
| ps->gblrst_cause[0] = read32(pmc + GBLRST_CAUSE0); |
| ps->gblrst_cause[1] = read32(pmc + GBLRST_CAUSE1); |
| |
| printk(BIOS_DEBUG, "GEN_PMCON: %08x %08x\n", ps->gen_pmcon_a, ps->gen_pmcon_b); |
| |
| printk(BIOS_DEBUG, "GBLRST_CAUSE: %08x %08x\n", |
| ps->gblrst_cause[0], ps->gblrst_cause[1]); |
| } |
| |
| /* |
| * Set which power state system will be after reapplying |
| * the power (from G3 State) |
| */ |
| void pmc_soc_set_afterg3_en(const bool on) |
| { |
| uint8_t reg8; |
| |
| reg8 = pci_read_config8(PCH_DEV_PMC, GEN_PMCON_B); |
| if (on) |
| reg8 &= ~SLEEP_AFTER_POWER_FAIL; |
| else |
| reg8 |= SLEEP_AFTER_POWER_FAIL; |
| pci_write_config8(PCH_DEV_PMC, GEN_PMCON_B, reg8); |
| } |
| |
| void pmc_lock_smi(void) |
| { |
| printk(BIOS_DEBUG, "Locking SMM enable.\n"); |
| pci_or_config32(PCH_DEV_PMC, GEN_PMCON_A, SMI_LOCK); |
| } |
| |
| void pmc_lockdown_config(void) |
| { |
| /* PMSYNC */ |
| pmc_or_mmio32(PMSYNC_TPR_CFG, PMSYNC_LOCK); |
| |
| /* Make sure payload/OS can't trigger global reset */ |
| pmc_global_reset_disable_and_lock(); |
| |
| /* Lock PMC stretch policy */ |
| pci_or_config32(PCH_DEV_PMC, GEN_PMCON_B, SLP_STR_POL_LOCK); |
| } |