| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright 2014 Rockchip Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <console/uart.h> |
| #include <arch/io.h> |
| #include <boot/coreboot_tables.h> |
| #include <console/console.h> /* for __console definition */ |
| #include <stdint.h> |
| #include <drivers/uart/uart8250reg.h> |
| |
| /* |
| * TODO: Use DRIVERS_UART_8250MEM driver instead. |
| * There is an issue in the IO call functions where x86 and ARM |
| * ordering is reversed. This 8250MEM driver uses the x86 convention. |
| * This driver can be replaced once the IO calls are sorted. |
| */ |
| |
| struct rk3288_uart { |
| union { |
| uint32_t thr; /* Transmit holding register. */ |
| uint32_t rbr; /* Receive buffer register. */ |
| uint32_t dll; /* Divisor latch lsb. */ |
| }; |
| union { |
| uint32_t ier; /* Interrupt enable register. */ |
| uint32_t dlm; /* Divisor latch msb. */ |
| }; |
| union { |
| uint32_t iir; /* Interrupt identification register. */ |
| uint32_t fcr; /* FIFO control register. */ |
| }; |
| uint32_t lcr; /* Line control register. */ |
| uint32_t mcr; /* Modem control register. */ |
| uint32_t lsr; /* Line status register. */ |
| uint32_t msr; /* Modem status register. */ |
| uint32_t scr; |
| uint32_t reserved1[(0x30 - 0x20) / 4]; |
| uint32_t srbr[(0x70 - 0x30) / 4]; |
| uint32_t far; |
| uint32_t tfr; |
| uint32_t rfw; |
| uint32_t usr; |
| uint32_t tfl; |
| uint32_t rfl; |
| uint32_t srr; |
| uint32_t srts; |
| uint32_t sbcr; |
| uint32_t sdmam; |
| uint32_t sfe; |
| uint32_t srt; |
| uint32_t stet; |
| uint32_t htx; |
| uint32_t dmasa; |
| uint32_t reserver2[(0xf4 - 0xac) / 4]; |
| uint32_t cpr; |
| uint32_t ucv; |
| uint32_t ctr; |
| } __attribute__ ((packed)); |
| |
| |
| static struct rk3288_uart * const uart_ptr = |
| (void *)CONFIG_CONSOLE_SERIAL_UART_ADDRESS; |
| |
| static void rk3288_uart_tx_flush(void); |
| static int rk3288_uart_tst_byte(void); |
| |
| static void rk3288_uart_init(void) |
| { |
| /* FIXME: Use a hardcoded divisor for now. |
| * uint16_t divisor = (u16) uart_baudrate_divisor(default_baudrate(), |
| * uart_platform_refclk(), 16) |
| */ |
| const unsigned divisor = 13; |
| const uint8_t line_config = UART8250_LCR_WLS_8; // 8n1 |
| |
| rk3288_uart_tx_flush(); |
| |
| // Disable interrupts. |
| writel(0, &uart_ptr->ier); |
| // Force DTR and RTS to high. |
| writel(UART8250_MCR_DTR | UART8250_MCR_RTS, &uart_ptr->mcr); |
| // Set line configuration, access divisor latches. |
| writel(UART8250_LCR_DLAB | line_config, &uart_ptr->lcr); |
| // Set the divisor. |
| writel(divisor & 0xff, &uart_ptr->dll); |
| writel((divisor >> 8) & 0xff, &uart_ptr->dlm); |
| // Hide the divisor latches. |
| writel(line_config, &uart_ptr->lcr); |
| // Enable FIFOs, and clear receive and transmit. |
| writel(UART8250_FCR_FIFO_EN | |
| UART8250_FCR_CLEAR_RCVR | |
| UART8250_FCR_CLEAR_XMIT, &uart_ptr->fcr); |
| } |
| |
| static void rk3288_uart_tx_byte(unsigned char data) |
| { |
| while (!(readl(&uart_ptr->lsr) & UART8250_LSR_THRE)); |
| writel(data, &uart_ptr->thr); |
| } |
| |
| static void rk3288_uart_tx_flush(void) |
| { |
| while (!(readl(&uart_ptr->lsr) & UART8250_LSR_TEMT)); |
| } |
| |
| static unsigned char rk3288_uart_rx_byte(void) |
| { |
| if (!rk3288_uart_tst_byte()) |
| return 0; |
| return readl(&uart_ptr->rbr); |
| } |
| |
| static int rk3288_uart_tst_byte(void) |
| { |
| return (readl(&uart_ptr->lsr) & UART8250_LSR_DR) == UART8250_LSR_DR; |
| } |
| |
| |
| |
| void uart_init(int idx) |
| { |
| rk3288_uart_init(); |
| } |
| |
| unsigned char uart_rx_byte(int idx) |
| { |
| return rk3288_uart_rx_byte(); |
| } |
| |
| void uart_tx_byte(int idx, unsigned char data) |
| { |
| rk3288_uart_tx_byte(data); |
| } |
| |
| void uart_tx_flush(int idx) |
| { |
| rk3288_uart_tx_flush(); |
| } |
| |
| #ifndef __PRE_RAM__ |
| void uart_fill_lb(void *data) |
| { |
| struct lb_serial serial; |
| serial.type = LB_SERIAL_TYPE_MEMORY_MAPPED; |
| serial.baseaddr = CONFIG_CONSOLE_SERIAL_UART_ADDRESS; |
| serial.baud = default_baudrate(); |
| lb_add_serial(&serial, data); |
| |
| lb_add_console(LB_TAG_CONSOLE_SERIAL8250MEM, data); |
| } |
| #endif |