| chip soc/intel/jasperlake |
| device cpu_cluster 0 on |
| device lapic 0 on end |
| end |
| |
| # GPE configuration |
| # Note that GPE events called out in ASL code rely on this |
| # route, i.e., if this route changes then the affected GPE |
| # offset bits also need to be changed. |
| # DW0 is used by: |
| # - GPP_B3 - TRACKPAD_INT_ODL |
| # - GPP_B4 - H1_AP_INT_ODL |
| # DW1 is used by: |
| # - GPP_C12 - AP_PEN_DET_ODL |
| # DW2 is used by: |
| # - GPP_D0 - WWAN_HOST_WAKE |
| # - GPP_D3 - WLAN_PCIE_WAKE_ODL |
| # EC_AP_WAKE_ODL is routed to LAN_WAKE#/GPD02 & is part of DW3. |
| register "pmc_gpe0_dw0" = "GPP_B" |
| register "pmc_gpe0_dw1" = "GPP_C" |
| register "pmc_gpe0_dw2" = "GPP_D" |
| |
| # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f |
| register "gen1_dec" = "0x00fc0801" |
| register "gen2_dec" = "0x000c0201" |
| # EC memory map range is 0x900-0x9ff |
| register "gen3_dec" = "0x00fc0901" |
| |
| # USB Port Configuration |
| register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)" # Type-C Port C0 |
| register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)" # Type-C Port C1 |
| register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port A0 |
| register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port A1 |
| register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)" # Discrete Bluetooth |
| register "usb2_ports[5]" = "USB2_PORT_EMPTY" # Not Used |
| register "usb2_ports[6]" = "USB2_PORT_EMPTY" # Not Used |
| register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # Integrated Bluetooth |
| |
| register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3/2 Type-C Port C0 |
| register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3/2 Type-C Port C1 |
| register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3/1 Type-A Port A0 |
| register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3/1 Type-A Port A1 |
| register "usb3_ports[4]" = "USB3_PORT_EMPTY" # Not Used |
| register "usb3_ports[5]" = "USB3_PORT_EMPTY" # Not Used |
| |
| register "SerialIoI2cMode" = "{ |
| [PchSerialIoIndexI2C0] = PchSerialIoPci, |
| [PchSerialIoIndexI2C1] = PchSerialIoPci, |
| [PchSerialIoIndexI2C2] = PchSerialIoPci, |
| [PchSerialIoIndexI2C3] = PchSerialIoPci, |
| [PchSerialIoIndexI2C4] = PchSerialIoPci, |
| [PchSerialIoIndexI2C5] = PchSerialIoDisabled, |
| }" |
| |
| register "SerialIoGSpiMode" = "{ |
| [PchSerialIoIndexGSPI0] = PchSerialIoPci, |
| [PchSerialIoIndexGSPI1] = PchSerialIoDisabled, |
| [PchSerialIoIndexGSPI2] = PchSerialIoDisabled, |
| }" |
| |
| register "SerialIoGSpiCsMode" = "{ |
| [PchSerialIoIndexGSPI0] = 1, |
| [PchSerialIoIndexGSPI1] = 0, |
| [PchSerialIoIndexGSPI2] = 0, |
| }" |
| |
| register "SerialIoGSpiCsState" = "{ |
| [PchSerialIoIndexGSPI0] = 0, |
| [PchSerialIoIndexGSPI1] = 0, |
| [PchSerialIoIndexGSPI2] = 0, |
| }" |
| |
| register "SerialIoUartMode" = "{ |
| [PchSerialIoIndexUART0] = PchSerialIoDisabled, |
| [PchSerialIoIndexUART1] = PchSerialIoDisabled, |
| [PchSerialIoIndexUART2] = PchSerialIoSkipInit, |
| }" |
| |
| # PCIE Root Port Configuration |
| register "PcieRpEnable[0]" = "0" |
| register "PcieRpEnable[1]" = "0" |
| register "PcieRpEnable[2]" = "0" |
| register "PcieRpEnable[3]" = "0" |
| register "PcieRpEnable[4]" = "0" |
| register "PcieRpEnable[5]" = "0" |
| register "PcieRpEnable[6]" = "0" |
| # PCIe Root Port 8 (index 7) hosts M.2 E-key WLAN. |
| register "PcieRpEnable[7]" = "1" |
| |
| register "PcieClkSrcUsage[0]" = "0xff" |
| register "PcieClkSrcUsage[1]" = "0xff" |
| register "PcieClkSrcUsage[2]" = "0xff" |
| # PCIe Clock Source 4 (index 3) is used by WLAN on PCIe Root Port 8 (index 7) |
| register "PcieClkSrcUsage[3]" = "7" |
| register "PcieClkSrcUsage[4]" = "0xff" |
| register "PcieClkSrcUsage[5]" = "0xff" |
| |
| # PCIE Clock Request to Clock Source Mapping |
| register "PcieClkSrcClkReq[0]" = "0" |
| register "PcieClkSrcClkReq[1]" = "1" |
| register "PcieClkSrcClkReq[2]" = "2" |
| register "PcieClkSrcClkReq[3]" = "3" |
| register "PcieClkSrcClkReq[4]" = "4" |
| register "PcieClkSrcClkReq[5]" = "5" |
| |
| # Audio related configurations |
| register "PchHdaDspEnable" = "1" |
| register "PchHdaAudioLinkHdaEnable" = "1" |
| register "PchHdaAudioLinkSspEnable[0]" = "1" |
| register "PchHdaAudioLinkSspEnable[1]" = "1" |
| register "PchHdaAudioLinkDmicEnable[0]" = "1" |
| register "PchHdaAudioLinkDmicEnable[1]" = "1" |
| |
| # Enable EMMC HS400 mode |
| register "ScsEmmcHs400Enabled" = "1" |
| |
| # GPIO for SD card detect |
| register "sdcard_cd_gpio" = "VGPIO_39" |
| # SD card power enable polarity |
| register "SdCardPowerEnableActiveHigh" = "1" |
| |
| # Display related UPDs |
| # Select eDP for port A |
| register "DdiPortAConfig" = "1" |
| |
| # Disable PM to allow for shorter irq pulses |
| register "gpio_override_pm" = "1" |
| register "gpio_pm[0]" = "0" |
| register "gpio_pm[1]" = "0" |
| register "gpio_pm[2]" = "0" |
| register "gpio_pm[3]" = "0" |
| register "gpio_pm[4]" = "0" |
| |
| # Enable HPD for DDI ports B/C |
| register "DdiPortBHpd" = "1" |
| register "DdiPortCHpd" = "1" |
| # Enable DDC for DDI ports B/C |
| register "DdiPortBDdc" = "1" |
| register "DdiPortCDdc" = "1" |
| |
| # Enable Speed Shift Technology support |
| register "speed_shift_enable" = "1" |
| |
| # chipset_lockdown configuration |
| # Use below format to override value in overridetree.cb if required |
| # format: |
| # register "common_soc_config.<variable_name>" = "value" |
| register "common_soc_config.chipset_lockdown" = CHIPSET_LOCKDOWN_COREBOOT |
| |
| device domain 0 on |
| device pci 00.0 on end # Host Bridge |
| device pci 02.0 on end # Integrated Graphics Device |
| device pci 04.0 off end # SA Thermal device |
| device pci 05.0 off end # IPU |
| device pci 09.0 off end # Intel Trace Hub |
| device pci 12.6 off end # GSPI 2 |
| device pci 14.0 on |
| chip drivers/usb/acpi |
| register "desc" = ""Root Hub"" |
| register "type" = "UPC_TYPE_HUB" |
| device usb 0.0 on |
| chip drivers/usb/acpi |
| register "desc" = ""Left Type-C Port"" |
| register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" |
| register "group" = "ACPI_PLD_GROUP(1, 1)" |
| device usb 2.0 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""Right Type-C Port"" |
| register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" |
| register "group" = "ACPI_PLD_GROUP(2, 1)" |
| device usb 2.1 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""Left Type-A Port"" |
| register "type" = "UPC_TYPE_A" |
| register "group" = "ACPI_PLD_GROUP(1, 2)" |
| device usb 2.2 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""Right Type-A Port"" |
| register "type" = "UPC_TYPE_A" |
| register "group" = "ACPI_PLD_GROUP(2, 2)" |
| device usb 2.3 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""Discrete Bluetooth"" |
| register "type" = "UPC_TYPE_INTERNAL" |
| register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H19)" |
| device usb 2.4 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""Integrated Bluetooth"" |
| register "type" = "UPC_TYPE_INTERNAL" |
| register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H19)" |
| device usb 2.7 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""Left Type-C Port"" |
| register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" |
| register "group" = "ACPI_PLD_GROUP(1, 1)" |
| device usb 3.0 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""Right Type-C Port"" |
| register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" |
| register "group" = "ACPI_PLD_GROUP(2, 1)" |
| device usb 3.1 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""Left Type-A Port"" |
| register "type" = "UPC_TYPE_USB3_A" |
| register "group" = "ACPI_PLD_GROUP(1, 2)" |
| device usb 3.2 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""Right Type-A Port"" |
| register "type" = "UPC_TYPE_USB3_A" |
| register "group" = "ACPI_PLD_GROUP(2, 2)" |
| device usb 3.3 on end |
| end |
| end |
| end |
| end # USB xHCI |
| device pci 14.1 off end # USB xDCI (OTG) |
| device pci 14.2 off end # PMC SRAM |
| chip drivers/intel/wifi |
| register "wake" = "GPE0_PME_B0" |
| device pci 14.3 on end # CNVi wifi |
| end |
| device pci 14.5 on end # SDCard |
| device pci 15.0 on end # I2C 0 |
| device pci 15.1 on end # I2C 1 |
| device pci 15.2 on end # I2C 2 |
| device pci 15.3 on end # I2C 3 |
| device pci 16.0 on end # HECI 1 |
| device pci 16.1 off end # HECI 2 |
| device pci 16.4 off end # HECI 3 |
| device pci 16.5 off end # HECI 4 |
| device pci 17.0 off end # SATA |
| device pci 19.0 on end # I2C 4 |
| device pci 19.1 off end # I2C 5 |
| device pci 19.2 on end # UART 2 |
| device pci 1a.0 on end # eMMC |
| device pci 1c.0 off end # PCI Express Root Port 1 |
| device pci 1c.1 off end # PCI Express Root Port 2 |
| device pci 1c.2 off end # PCI Express Root Port 3 |
| device pci 1c.3 off end # PCI Express Root Port 4 |
| device pci 1c.4 off end # PCI Express Root Port 5 |
| device pci 1c.5 off end # PCI Express Root Port 6 |
| device pci 1c.6 off end # PCI Express Root Port 7 |
| # External PCIe port 4 is mapped to PCIe Root port 8 |
| device pci 1c.7 on end # PCI Express Root Port 8 - WLAN |
| device pci 1e.0 off end # UART 0 |
| device pci 1e.1 off end # UART 1 |
| device pci 1e.2 on |
| chip drivers/spi/acpi |
| register "hid" = "ACPI_DT_NAMESPACE_HID" |
| register "compat_string" = ""google,cr50"" |
| register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_B4_IRQ)" |
| device spi 0 on end |
| end |
| end # GSPI 0 |
| device pci 1e.3 off end # GSPI 1 |
| device pci 1f.0 on |
| chip ec/google/chromeec |
| device pnp 0c09.0 on end |
| end |
| end # eSPI Interface |
| device pci 1f.1 on end # P2SB |
| device pci 1f.2 hidden end # Power Management Controller |
| device pci 1f.3 off end # Intel HDA/cAVS |
| device pci 1f.4 off end # SMBus |
| device pci 1f.5 on end # PCH SPI |
| device pci 1f.7 off end # Intel Trace Hub |
| end |
| end |