baytrail: Fix XHCI problems and re-enable
- a few clock gating bits were set improperly and were preventing
the system from transitioning out of S0 state.
- the XHCC registers were not getting the top byte set properly
which includes things like DMA write request size and request
boundary crossing control. This was causing memory corruption.
BUG=chrome-os-partner:23635
BRANCH=rambi
TEST=build and boot kernel from USB on rambi with XHCI driver
Change-Id: I8e8135a793dfbaa1f163766702e3a8f19bba9703
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175558
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4933
Tested-by: build bot (Jenkins)
diff --git a/src/mainboard/google/rambi/devicetree.cb b/src/mainboard/google/rambi/devicetree.cb
index af115a6..a5fe37e 100644
--- a/src/mainboard/google/rambi/devicetree.cb
+++ b/src/mainboard/google/rambi/devicetree.cb
@@ -5,8 +5,8 @@
register "sata_ahci" = "0x1"
register "ide_legacy_combined" = "0x0"
- # Route USB ports to XHCI -- DISABLED UNTIL XHCI WORKS
- register "usb_route_to_xhci" = "0"
+ # Route USB ports to XHCI
+ register "usb_route_to_xhci" = "1"
# USB Port Disable Mask
register "usb2_port_disable_mask" = "0x0"
diff --git a/src/soc/intel/baytrail/xhci.c b/src/soc/intel/baytrail/xhci.c
index 244a4dc..30e6098 100644
--- a/src/soc/intel/baytrail/xhci.c
+++ b/src/soc/intel/baytrail/xhci.c
@@ -83,11 +83,11 @@
/* BAR + 0x0010[10,9,5]=110b */
REG_RES_RMW32(PCI_BASE_ADDRESS_0, 0x0010, ~0x00000020, 0x00000600),
/* BAR + 0x8058[20,16,8]=110b */
- REG_RES_RMW32(PCI_BASE_ADDRESS_0, 0x8058, ~0x00000010, 0x00110000),
+ REG_RES_RMW32(PCI_BASE_ADDRESS_0, 0x8058, ~0x00000100, 0x00110000),
/* BAR + 0x8060[25]=1b */
REG_RES_OR32(PCI_BASE_ADDRESS_0, 0x8060, 0x02000000),
- /* BAR + 0x80e0[19,9,6]=001b, toggle bit 24=1 */
- REG_RES_RMW32(PCI_BASE_ADDRESS_0, 0x80e0, ~0x00010020, 0x01000040),
+ /* BAR + 0x80e0[16,9,6]=001b, toggle bit 24=1 */
+ REG_RES_RMW32(PCI_BASE_ADDRESS_0, 0x80e0, ~0x00010200, 0x01000040),
/* BAR + 0x80e0 toggle bit 24=0 */
REG_RES_RMW32(PCI_BASE_ADDRESS_0, 0x80e0, ~0x01000000, 0),
/* BAR + 0x80f0[20]=0b */
@@ -113,7 +113,7 @@
const struct reg_script xhci_clock_gating_script[] = {
/* ConfigureXhciClockGating() */
/* D20:F0:40[21:19,18,10:8]=000,1,001 (don't write byte 3) */
- REG_PCI_RMW16(0x40, ~0x0300, 0x0010),
+ REG_PCI_RMW16(0x40, ~0x0600, 0x0100),
REG_PCI_RMW8(0x42, ~0x38, 0x04),
/* D20:F0:44[5:3]=001b */
REG_PCI_RMW16(0x44, ~0x0030, 0x0008),
@@ -187,6 +187,9 @@
REG_SCRIPT_NEXT(xhci_init_script),
/* Initialize clock gating */
REG_SCRIPT_NEXT(xhci_clock_gating_script),
+ /* Finalize XHCC1 and XHCC2 */
+ REG_PCI_RMW32(0x44, ~0x00000000, 0x83c00000),
+ REG_PCI_RMW32(0x40, ~0x00800000, 0x80000000),
/* Set USB2 Port Routing Mask */
REG_PCI_WRITE32(XHCI_USB2PRM, BYTM_USB2_PORT_MAP),
/* Set USB3 Port Routing Mask */