| chip soc/intel/tigerlake |
| |
| # USB Port Config |
| register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port A0 |
| register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # Type-A / Type-C C1 |
| register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)" # M.2 Camera |
| register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)" # Type-A / Type-C C0 |
| register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # M.2 Bluetooth |
| |
| register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC1)" # USB3/2 Type A port A0 |
| |
| register "SaGv" = "SaGv_Disabled" |
| |
| register "TcssAuxOri" = "1" |
| register "IomTypeCPortPadCfg[0]" = "0x090E000A" |
| register "IomTypeCPortPadCfg[1]" = "0x090E000D" |
| |
| # I2C Port Config |
| register "SerialIoI2cMode" = "{ |
| [PchSerialIoIndexI2C0] = PchSerialIoPci, |
| [PchSerialIoIndexI2C1] = PchSerialIoPci, |
| [PchSerialIoIndexI2C2] = PchSerialIoPci, |
| [PchSerialIoIndexI2C3] = PchSerialIoDisabled, |
| [PchSerialIoIndexI2C4] = PchSerialIoDisabled, |
| [PchSerialIoIndexI2C5] = PchSerialIoPci, |
| }" |
| |
| device domain 0 on |
| device pci 07.0 off end # TBT_PCIe0 0x9A23 |
| device pci 07.1 off end # TBT_PCIe1 0x9A25 |
| device pci 07.2 off end # TBT_PCIe2 0x9A27 |
| device pci 07.3 off end # TBT_PCIe3 0x9A29 |
| device pci 15.0 on |
| chip drivers/i2c/generic |
| register "hid" = ""10EC5682"" |
| register "name" = ""RT58"" |
| register "desc" = ""Headset Codec"" |
| register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_F8)" |
| # Set the jd_src to RT5668_JD1 for jack detection |
| register "property_count" = "1" |
| register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" |
| register "property_list[0].name" = ""realtek,jd-src"" |
| register "property_list[0].integer" = "1" |
| device i2c 1a on end |
| end |
| end # I2C0 |
| device pci 15.1 on |
| chip drivers/i2c/hid |
| register "generic.hid" = ""GDIX0000"" |
| register "generic.desc" = ""Goodix Touchscreen"" |
| register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)" |
| register "generic.probed" = "1" |
| register "generic.reset_gpio" = |
| "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)" |
| register "generic.reset_delay_ms" = "120" |
| register "generic.reset_off_delay_ms" = "3" |
| register "generic.enable_gpio" = |
| "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)" |
| register "generic.enable_delay_ms" = "12" |
| register "generic.has_power_resource" = "1" |
| register "hid_desc_reg_offset" = "0x01" |
| device i2c 5d on end |
| end |
| end # I2C1 |
| device pci 15.2 on |
| chip drivers/i2c/sx9310 |
| register "desc" = ""SAR0 Proximity Sensor"" |
| register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)" |
| register "speed" = "I2C_SPEED_FAST" |
| register "uid" = "0" |
| register "reg_prox_ctrl0" = "0x10" |
| register "reg_prox_ctrl1" = "0x00" |
| register "reg_prox_ctrl2" = "0x84" |
| register "reg_prox_ctrl3" = "0x0e" |
| register "reg_prox_ctrl4" = "0x07" |
| register "reg_prox_ctrl5" = "0xc6" |
| register "reg_prox_ctrl6" = "0x20" |
| register "reg_prox_ctrl7" = "0x0d" |
| register "reg_prox_ctrl8" = "0x8d" |
| register "reg_prox_ctrl9" = "0x43" |
| register "reg_prox_ctrl10" = "0x1f" |
| register "reg_prox_ctrl11" = "0x00" |
| register "reg_prox_ctrl12" = "0x00" |
| register "reg_prox_ctrl13" = "0x00" |
| register "reg_prox_ctrl14" = "0x00" |
| register "reg_prox_ctrl15" = "0x00" |
| register "reg_prox_ctrl16" = "0x00" |
| register "reg_prox_ctrl17" = "0x00" |
| register "reg_prox_ctrl18" = "0x00" |
| register "reg_prox_ctrl19" = "0x00" |
| register "reg_sar_ctrl0" = "0x50" |
| register "reg_sar_ctrl1" = "0x8a" |
| register "reg_sar_ctrl2" = "0x3c" |
| device i2c 28 on end |
| end |
| end # I2C2 0xA0EA |
| device pci 19.1 on |
| chip drivers/i2c/generic |
| register "hid" = ""ELAN0000"" |
| register "desc" = ""ELAN Touchpad"" |
| register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E15_IRQ)" |
| register "wake" = "GPE0_DW2_15" |
| register "probed" = "1" |
| device i2c 15 on end |
| end |
| end # I2C5 0xA0C6 |
| device pci 1f.3 on |
| chip drivers/generic/max98357a |
| register "hid" = ""MX98357A"" |
| register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10)" |
| register "sdmode_delay" = "5" |
| device generic 0 on end |
| end |
| end # Intel HD audio |
| end |
| end |