| ## |
| ## This file is part of the coreboot project. |
| ## |
| ## Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. |
| ## Copyright (C) 2014 Intel Corporation |
| ## |
| ## This program is free software; you can redistribute it and/or modify |
| ## it under the terms of the GNU General Public License as published by |
| ## the Free Software Foundation; version 2 of the License. |
| ## |
| ## This program is distributed in the hope that it will be useful, |
| ## but WITHOUT ANY WARRANTY; without even the implied warranty of |
| ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| ## GNU General Public License for more details. |
| ## |
| |
| chip soc/intel/fsp_baytrail |
| |
| #### ACPI Register Settings #### |
| register "fadt_pm_profile" = "PM_UNSPECIFIED" |
| register "fadt_boot_arch" = "ACPI_FADT_LEGACY_FREE" |
| |
| #### FSP register settings #### |
| register "PcdSataMode" = "SATA_MODE_AHCI" |
| register "PcdMrcInitSPDAddr1" = "SPD_ADDR_DEFAULT" |
| register "PcdMrcInitSPDAddr2" = "SPD_ADDR_DEFAULT" |
| register "PcdMrcInitMmioSize" = "MMIO_SIZE_DEFAULT" |
| register "PcdeMMCBootMode" = "EMMC_FOLLOWS_DEVICETREE" |
| register "PcdIgdDvmt50PreAlloc" = "IGD_MEMSIZE_DEFAULT" |
| register "PcdApertureSize" = "APERTURE_SIZE_DEFAULT" |
| register "PcdGttSize" = "GTT_SIZE_DEFAULT" |
| register "PcdLpssSioEnablePciMode" = "LPSS_PCI_MODE_DEFAULT" |
| register "AzaliaAutoEnable" = "AZALIA_FOLLOWS_DEVICETREE" |
| register "LpeAcpiModeEnable" = "LPE_ACPI_MODE_DISABLED" |
| register "IgdRenderStandby" = "IGD_RENDER_STANDBY_ENABLE" |
| register "EnableMemoryDown" = "MEMORY_DOWN_ENABLE" |
| register "DRAMSpeed" = "DRAM_SPEED_1066MHZ" |
| register "DRAMType" = "DRAM_TYPE_DDR3L" |
| register "DIMM0Enable" = "DIMM0_ENABLE" |
| register "DIMM1Enable" = "DIMM1_DISABLE" |
| register "DIMMDWidth" = "DIMM_DWIDTH_X16" |
| register "DIMMDensity" = "DIMM_DENSITY_2G_BIT" # Setting for 1GB board - modified runtime for 2GB board in romstage.c to DIMM_DENSITY_4G_BIT |
| register "DIMMBusWidth" = "DIMM_BUS_WIDTH_64BIT" |
| register "DIMMSides" = "DIMM_SIDES_1RANK" |
| register "DIMMtCL" = "11" |
| register "DIMMtRPtRCD" = "11" |
| register "DIMMtWR" = "12" |
| register "DIMMtWTR" = "6" |
| register "DIMMtRRD" = "6" |
| register "DIMMtRTP" = "6" |
| register "DIMMtFAW" = "20" |
| |
| device cpu_cluster 0 on |
| device lapic 0 on end |
| end |
| |
| device domain 0 on |
| device pci 00.0 on end # 8086 0F00 - SoC router - |
| device pci 02.0 on end # 8086 0F31 - GFX micro HDMI |
| device pci 03.0 off end # 8086 0F38 - MIPI - |
| |
| device pci 10.0 off end # 8086 0F14 - EMMC Port - |
| device pci 11.0 off end # 8086 0F15 - SDIO Port - |
| device pci 12.0 on end # 8086 0F16 - SD Port MicroSD on SD3 |
| device pci 13.0 on end # 8086 0F23 - SATA AHCI Onboard & HSEC |
| device pci 14.0 on end # 8086 0F35 - USB XHCI - Onboard & HSEC - Enabling both EHCI and XHCI will default to EHCI if not changed at runtime |
| device pci 15.0 on end # 8086 0F28 - LP Engine Audio LSEC |
| device pci 17.0 off end # 8086 0F50 - MMC Port - |
| device pci 18.0 on end # 8086 0F40 - SIO - DMA - |
| device pci 18.1 off end # 8086 0F41 - I2C Port 1 (0) - |
| device pci 18.2 on end # 8086 0F42 - I2C Port 2 (1) - (testpoints) |
| device pci 18.3 off end # 8086 0F43 - I2C Port 3 (2) - |
| device pci 18.4 off end # 8086 0F44 - I2C Port 4 (3) - |
| device pci 18.5 off end # 8086 0F45 - I2C Port 5 (4) - |
| device pci 18.6 on end # 8086 0F46 - I2C Port 6 (5) LSEC |
| device pci 18.7 on end # 8086 0F47 - I2C Port 7 (6) HSEC |
| device pci 1a.0 on end # 8086 0F18 - TXE - |
| device pci 1b.0 off end # 8086 0F04 - HD Audio - |
| device pci 1c.0 on end # 8086 0F48 - PCIe Port 1 (0) Must remain on |
| device pci 1c.1 on end # 8086 0F4A - PCIe Port 2 (1) Onboard GBE (some models) |
| device pci 1c.2 on end # 8086 0F4C - PCIe Port 3 (2) Onboard GBE |
| device pci 1c.3 on end # 8086 0F4E - PCIe Port 4 (3) HSEC |
| device pci 1d.0 on end # 8086 0F34 - USB EHCI - Enabling both EHCI and XHCI will default to EHCI if not changed at runtime |
| device pci 1e.0 on end # 8086 0F06 - SIO - DMA - |
| device pci 1e.1 on end # 8086 0F08 - PWM 1 LSEC |
| device pci 1e.2 on end # 8086 0F09 - PWM 2 LSEC |
| device pci 1e.3 on end # 8086 0F0A - HSUART 1 LSEC |
| device pci 1e.4 on end # 8086 0F0C - HSUART 2 LSEC |
| device pci 1e.5 on end # 8086 0F0E - SPI LSEC |
| device pci 1f.0 on end # 8086 0F1C - LPC bridge No connector |
| device pci 1f.3 on end # 8086 0F12 - SMBus 0 SPC |
| end |
| end |