| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2007-2008 coresystems GmbH |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| // __PRE_RAM__ means: use "unsigned" for device, not a struct. |
| |
| #include <stdint.h> |
| #include <string.h> |
| #include <arch/io.h> |
| #include <device/pci_def.h> |
| #include <device/pnp_def.h> |
| #include <cpu/x86/lapic.h> |
| #include <lib.h> |
| #include <arch/acpi.h> |
| #include <cbmem.h> |
| #include <timestamp.h> |
| #include <superio/smsc/lpc47m15x/lpc47m15x.h> |
| #include <pc80/mc146818rtc.h> |
| #include <console/console.h> |
| #include <cpu/x86/bist.h> |
| #include <cpu/intel/romstage.h> |
| #include <northbridge/intel/i945/i945.h> |
| #include <northbridge/intel/i945/raminit.h> |
| #include <southbridge/intel/i82801gx/i82801gx.h> |
| |
| #define SERIAL_DEV PNP_DEV(0x2e, LPC47M15X_SP1) |
| #define PME_DEV PNP_DEV(0x2e, LPC47M15X_PME) |
| |
| static void ich7_enable_lpc(void) |
| { |
| // Enable Serial IRQ |
| pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x64, 0xd0); |
| // Set COM1/COM2 decode range |
| pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0010); |
| // Enable COM1 |
| pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x140d); |
| // Enable SuperIO Power Management Events |
| pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x84, 0x007c0681); |
| } |
| |
| static void rcba_config(void) |
| { |
| /* Set up virtual channel 0 */ |
| //RCBA32(0x0014) = 0x80000001; |
| //RCBA32(0x001c) = 0x03128010; |
| |
| /* Device 1f interrupt pin register */ |
| RCBA32(0x3100) = 0x00042210; |
| /* Device 1d interrupt pin register */ |
| RCBA32(0x310c) = 0x00214321; |
| |
| /* dev irq route register */ |
| RCBA16(0x3140) = 0x0132; |
| RCBA16(0x3142) = 0x0146; |
| RCBA16(0x3144) = 0x0237; |
| RCBA16(0x3146) = 0x3201; |
| RCBA16(0x3148) = 0x0146; |
| |
| /* Enable IOAPIC */ |
| RCBA8(0x31ff) = 0x03; |
| |
| /* Disable unused devices */ |
| //RCBA32(0x3418) = FD_PCIE6|FD_PCIE5|FD_PCIE4|FD_ACMOD|FD_ACAUD|FD_PATA; |
| // RCBA32(0x3418) |= (1 << 0); // Required. |
| // FIXME look me up! |
| RCBA32(0x3418) = 0x003204e1; |
| |
| /* Enable PCIe Root Port Clock Gate */ |
| // RCBA32(0x341c) = 0x00000001; |
| } |
| |
| static void early_ich7_init(void) |
| { |
| uint8_t reg8; |
| uint32_t reg32; |
| |
| // program secondary mlt XXX byte? |
| pci_write_config8(PCI_DEV(0, 0x1e, 0), 0x1b, 0x20); |
| |
| // reset rtc power status |
| reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa4); |
| reg8 &= ~(1 << 2); |
| pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa4, reg8); |
| |
| // usb transient disconnect |
| reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad); |
| reg8 |= (3 << 0); |
| pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8); |
| |
| reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc); |
| reg32 |= (1 << 29) | (1 << 17); |
| pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32); |
| |
| reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc); |
| reg32 |= (1 << 31) | (1 << 27); |
| pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32); |
| |
| RCBA32(0x0088) = 0x0011d000; |
| RCBA16(0x01fc) = 0x060f; |
| RCBA32(0x01f4) = 0x86000040; |
| RCBA32(0x0214) = 0x10030549; |
| RCBA32(0x0218) = 0x00020504; |
| RCBA8(0x0220) = 0xc5; |
| reg32 = RCBA32(0x3410); |
| reg32 |= (1 << 6); |
| RCBA32(0x3410) = reg32; |
| reg32 = RCBA32(0x3430); |
| reg32 &= ~(3 << 0); |
| reg32 |= (1 << 0); |
| RCBA32(0x3430) = reg32; |
| RCBA32(0x3418) |= (1 << 0); |
| RCBA16(0x0200) = 0x2008; |
| RCBA8(0x2027) = 0x0d; |
| RCBA16(0x3e08) |= (1 << 7); |
| RCBA16(0x3e48) |= (1 << 7); |
| RCBA32(0x3e0e) |= (1 << 7); |
| RCBA32(0x3e4e) |= (1 << 7); |
| |
| // next step only on ich7m b0 and later: |
| reg32 = RCBA32(0x2034); |
| reg32 &= ~(0x0f << 16); |
| reg32 |= (5 << 16); |
| RCBA32(0x2034) = reg32; |
| } |
| |
| void mainboard_romstage_entry(unsigned long bist) |
| { |
| int s3resume = 0, boot_mode = 0; |
| |
| |
| timestamp_init(get_initial_timestamp()); |
| timestamp_add_now(TS_START_ROMSTAGE); |
| |
| if (bist == 0) |
| enable_lapic(); |
| |
| ich7_enable_lpc(); |
| /* Enable SuperIO PM */ |
| lpc47m15x_enable_serial(PME_DEV, 0x680); |
| lpc47m15x_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); /* 0x3f8 */ |
| |
| /* Set up the console */ |
| console_init(); |
| |
| /* Halt if there was a built in self test failure */ |
| report_bist_failure(bist); |
| |
| if (MCHBAR16(SSKPD) == 0xCAFE) { |
| printk(BIOS_DEBUG, "soft reset detected.\n"); |
| boot_mode = 1; |
| } |
| |
| /* Perform some early chipset initialization required |
| * before RAM initialization can work |
| */ |
| i945_early_initialization(); |
| |
| s3resume = southbridge_detect_s3_resume(); |
| |
| /* Enable SPD ROMs and DDR-II DRAM */ |
| enable_smbus(); |
| |
| #if CONFIG_DEFAULT_CONSOLE_LOGLEVEL > 8 |
| dump_spd_registers(); |
| #endif |
| |
| timestamp_add_now(TS_BEFORE_INITRAM); |
| sdram_initialize(s3resume ? 2 : boot_mode, NULL); |
| timestamp_add_now(TS_AFTER_INITRAM); |
| |
| /* Perform some initialization that must run before stage2 */ |
| early_ich7_init(); |
| |
| /* This should probably go away. Until now it is required |
| * and mainboard specific |
| */ |
| rcba_config(); |
| |
| /* Chipset Errata! */ |
| fixup_i945_errata(); |
| |
| /* Initialize the internal PCIe links before we go into stage2 */ |
| i945_late_initialization(s3resume); |
| } |