src/mainboard/hp/abm/romstage.c

/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2012 Advanced Micro Devices, Inc.
 * Copyright (C) 2014 Sage Electronic Engineering, LLC
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <stdint.h>
#include <string.h>
#include <device/pci_def.h>
#include <device/pci_ids.h>
#include <arch/acpi.h>
#include <arch/io.h>
#include <arch/stages.h>
#include <device/pnp_def.h>
#include <arch/cpu.h>
#include <cpu/x86/lapic.h>
#include <console/console.h>
#include <commonlib/loglevel.h>
#include <cpu/amd/car.h>
#include <northbridge/amd/agesa/agesawrapper.h>
#include <northbridge/amd/agesa/agesa_helper.h>
#include <cpu/x86/bist.h>
#include <cpu/x86/lapic.h>
#include <southbridge/amd/agesa/hudson/hudson.h>
#include <cpu/amd/agesa/s3_resume.h>
#include <cbmem.h>
#include <superio/nuvoton/common/nuvoton.h>
#include <superio/nuvoton/nct5104d/nct5104d.h>

#define SERIAL_DEV PNP_DEV(0x4E, NCT5104D_SP4)

void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
	u32 val, t32;
	u32 *addr32;


	/* Must come first to enable PCI MMCONF. */
	amd_initmmio();

	/* Set LPC decode enables. */
	pci_devfn_t dev = PCI_DEV(0, 0x14, 3);
	pci_write_config32(dev, 0x44, 0xff03ffd5);

	hudson_lpc_port80();

	/* Enable the AcpiMmio space */
	outb(0x24, 0xcd6);
	outb(0x01, 0xcd7);

	/* Set auxiliary output clock frequency on OSCOUT1 pin to be 25MHz */
	/* Set auxiliary output clock frequency on OSCOUT2 pin to be 48MHz */
	addr32 = (u32 *)0xfed80e28;
	t32 = *addr32;
	t32 &= 0xffc0ffff; // Clr bits [21:19] & [18:16]
	t32 |= 0x00010000; // Set bit 16 for 25MHz
	*addr32 = t32;

	/* Enable Auxiliary OSCOUT1/OSCOUT2 */
	addr32 = (u32 *)0xfed80e40;
	t32 = *addr32;
	t32 &= 0xffffff7b; // clear 2, 7
	*addr32 = t32;

	if (!cpu_init_detectedx && boot_cpu()) {
		post_code(0x30);
		post_code(0x31);

		nct5104d_enable_uartd(SERIAL_DEV);
		nuvoton_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
		console_init();
	}

	/* Halt if there was a built in self test failure */
	post_code(0x34);
	report_bist_failure(bist);

	/* Load MPB */
	val = cpuid_eax(1);
	printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val);
	printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx);

	post_code(0x37);
	agesawrapper_amdinitreset();
	post_code(0x38);
	printk(BIOS_DEBUG, "Got past yangtze_early_setup\n");

	post_code(0x39);

	agesawrapper_amdinitearly();
	int s3resume = acpi_is_wakeup_s3();
	if (!s3resume) {
		post_code(0x40);
		agesawrapper_amdinitpost();
		post_code(0x41);
		agesawrapper_amdinitenv();
		/* TODO: Disable cache is not ok. */
		disable_cache_as_ram();
	} else { /* S3 detect */
		printk(BIOS_INFO, "S3 detected\n");

		post_code(0x60);
		agesawrapper_amdinitresume();

		amd_initcpuio();
		agesawrapper_amds3laterestore();

		post_code(0x61);
		prepare_for_resume();
	}

	outb(0xEA, 0xCD6);
	outb(0x1, 0xcd7);

	post_code(0x50);
	copy_and_run();

	post_code(0x54);  /* Should never see this post code. */
}