| /* |
| ***************************************************************************** |
| * |
| * Copyright (c) 2011, Advanced Micro Devices, Inc. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of Advanced Micro Devices, Inc. nor the names of |
| * its contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * *************************************************************************** |
| * |
| */ |
| |
| #ifndef BIOS_SIZE |
| #define BIOS_SIZE 0x04 //04 - 1MB |
| #endif |
| #ifndef LEGACY_FREE |
| #define LEGACY_FREE 0x00 |
| #endif |
| //#define ACPI_SLEEP_TRAP 0x01 |
| //#define SPREAD_SPECTRUM_EPROM_LOAD 0x01 |
| |
| /** |
| * Module Specific Defines for platform BIOS |
| * |
| */ |
| |
| /** |
| * PCIEX_BASE_ADDRESS - Define PCIE base address |
| * |
| * @param[Option] MOVE_PCIEBAR_TO_F0000000 Set PCIe base address to 0xF7000000 |
| */ |
| #ifdef MOVE_PCIEBAR_TO_F0000000 |
| #define PCIEX_BASE_ADDRESS 0xF7000000 |
| #else |
| #define PCIEX_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS |
| #endif |
| |
| /** |
| * SMBUS0_BASE_ADDRESS - Smbus base address |
| * |
| */ |
| #ifndef SMBUS0_BASE_ADDRESS |
| #define SMBUS0_BASE_ADDRESS 0xB00 |
| #endif |
| |
| /** |
| * SMBUS1_BASE_ADDRESS - Smbus1 (ASF) base address |
| * |
| */ |
| #ifndef SMBUS1_BASE_ADDRESS |
| #define SMBUS1_BASE_ADDRESS 0xB20 |
| #endif |
| |
| /** |
| * GEC_BASE_ADDRESS - Gec Shadow ROM base address |
| * |
| */ |
| #ifndef GEC_BASE_ADDRESS |
| #define GEC_BASE_ADDRESS 0xFED61000 |
| #endif |
| |
| |
| /** |
| * SIO_PME_BASE_ADDRESS - Super IO PME base address |
| * |
| */ |
| #ifndef SIO_PME_BASE_ADDRESS |
| #define SIO_PME_BASE_ADDRESS 0xE00 |
| #endif |
| |
| /** |
| * SIO_HWM_BASE_ADDRESS - Super IO HWM base address |
| * |
| */ |
| #ifndef SIO_HWM_BASE_ADDRESS |
| #define SIO_HWM_BASE_ADDRESS 0x290 |
| #endif |
| |
| /** |
| * SPI_BASE_ADDRESS - SPI controller (ROM) base address |
| * |
| */ |
| #ifndef SPI_BASE_ADDRESS |
| #define SPI_BASE_ADDRESS 0xFEC10000 |
| #endif |
| |
| /** |
| * WATCHDOG_TIMER_BASE_ADDRESS - WATCHDOG timer base address |
| * |
| */ |
| #ifndef WATCHDOG_TIMER_BASE_ADDRESS |
| #define WATCHDOG_TIMER_BASE_ADDRESS 0xFEC000F0 // Watchdog Timer Base Address |
| #endif |
| |
| /** |
| * HPET_BASE_ADDRESS - HPET base address |
| * |
| */ |
| #ifndef HPET_BASE_ADDRESS |
| #define HPET_BASE_ADDRESS 0xFED00000 // HPET Base address |
| #endif |
| |
| /** |
| * ALT_ADDR_400 - For some BIOS codebases which use 0x400 as ACPI base address |
| * |
| */ |
| #ifdef ALT_ADDR_400 |
| #define ACPI_BLK_BASE 0x400 |
| #else |
| #define ACPI_BLK_BASE 0x800 |
| #endif |
| |
| #define PM1_STATUS_OFFSET 0x00 |
| #define PM1_ENABLE_OFFSET 0x02 |
| #define PM1_CONTROL_OFFSET 0x04 |
| #define PM_TIMER_OFFSET 0x08 |
| #define CPU_CONTROL_OFFSET 0x10 |
| #define EVENT_STATUS_OFFSET 0x20 |
| #define EVENT_ENABLE_OFFSET 0x24 |
| |
| /** |
| * PM1_EVT_BLK_ADDRESS - ACPI power management Event Block base address |
| * |
| */ |
| #define PM1_EVT_BLK_ADDRESS ACPI_BLK_BASE + PM1_STATUS_OFFSET // AcpiPm1EvtBlkAddr |
| |
| /** |
| * PM1_CNT_BLK_ADDRESS - ACPI power management Control block base address |
| * |
| */ |
| #define PM1_CNT_BLK_ADDRESS ACPI_BLK_BASE + PM1_CONTROL_OFFSET // AcpiPm1CntBlkAddr |
| |
| /** |
| * PM1_TMR_BLK_ADDRESS - ACPI power management Timer block base address |
| * |
| */ |
| #define PM1_TMR_BLK_ADDRESS ACPI_BLK_BASE + PM_TIMER_OFFSET // AcpiPmTmrBlkAddr |
| |
| /** |
| * CPU_CNT_BLK_ADDRESS - ACPI power management CPU Control block base address |
| * |
| */ |
| #define CPU_CNT_BLK_ADDRESS ACPI_BLK_BASE + CPU_CONTROL_OFFSET // CpuControlBlkAddr |
| |
| /** |
| * GPE0_BLK_ADDRESS - ACPI power management General Purpose Event block base address |
| * |
| */ |
| #define GPE0_BLK_ADDRESS ACPI_BLK_BASE + EVENT_STATUS_OFFSET // AcpiGpe0BlkAddr |
| |
| /** |
| * SMI_CMD_PORT - ACPI SMI Command block base address |
| * |
| */ |
| #define SMI_CMD_PORT 0xB0 // SmiCmdPortAddr |
| |
| /** |
| * ACPI_PMA_CNT_BLK_ADDRESS - ACPI power management additional control block base address |
| * |
| */ |
| #define ACPI_PMA_CNT_BLK_ADDRESS 0xFE00 // AcpiPmaCntBlkAddr |
| |
| /** |
| * SATA_IDE_MODE_SSID - Sata controller IDE mode SSID. |
| * Define value for SSID while SATA controller set to IDE mode. |
| */ |
| #ifndef SATA_IDE_MODE_SSID |
| #define SATA_IDE_MODE_SSID 0x43901002 |
| #endif |
| |
| /** |
| * SATA_RAID_MODE_SSID - Sata controller RAID mode SSID. |
| * Define value for SSID while SATA controller set to RAID mode. |
| */ |
| #ifndef SATA_RAID_MODE_SSID |
| #define SATA_RAID_MODE_SSID 0x43921002 |
| #endif |
| |
| /** |
| * SATA_RAID5_MODE_SSID - Sata controller RAID5 mode SSID. |
| * Define value for SSID while SATA controller set to RAID5 mode. |
| */ |
| #ifndef SATA_RAID5_MODE_SSID |
| #define SATA_RAID5_MODE_SSID 0x43931002 |
| #endif |
| |
| /** |
| * SATA_AHCI_MODE_SSID - Sata controller AHCI mode SSID. |
| * Define value for SSID while SATA controller set to AHCI mode. |
| */ |
| #ifndef SATA_AHCI_SSID |
| #define SATA_AHCI_SSID 0x43911002 |
| #endif |
| |
| /** |
| * OHCI_SSID - All SB OHCI controllers SSID value. |
| * |
| */ |
| #ifndef OHCI_SSID |
| #define OHCI_SSID 0x43971002 |
| #endif |
| |
| /** |
| * EHCI_SSID - All SB EHCI controllers SSID value. |
| * |
| */ |
| #ifndef EHCI_SSID |
| #define EHCI_SSID 0x43961002 |
| #endif |
| |
| /** |
| * OHCI4_SSID - OHCI (USB 1.1 mode *HW force) controllers SSID value. |
| * |
| */ |
| #ifndef OHCI4_SSID |
| #define OHCI4_SSID 0x43991002 |
| #endif |
| |
| /** |
| * SMBUS_SSID - Smbus controller (South Bridge device 0x14 function 0) SSID value. |
| * |
| */ |
| #ifndef SMBUS_SSID |
| #define SMBUS_SSID 0x43851002 |
| #endif |
| |
| /** |
| * IDE_SSID - SATA IDE controller (South Bridge device 0x14 function 1) SSID value. |
| * |
| */ |
| #ifndef IDE_SSID |
| #define IDE_SSID 0x439C1002 |
| #endif |
| |
| /** |
| * AZALIA_SSID - AZALIA controller (South Bridge device 0x14 function 2) SSID value. |
| * |
| */ |
| #ifndef AZALIA_SSID |
| #define AZALIA_SSID 0x43831002 |
| #endif |
| |
| /** |
| * LPC_SSID - LPC controller (South Bridge device 0x14 function 3) SSID value. |
| * |
| */ |
| #ifndef LPC_SSID |
| #define LPC_SSID 0x439D1002 |
| #endif |
| |
| /** |
| * PCIB_SSID - PCIB controller (South Bridge device 0x14 function 4) SSID value. |
| * |
| */ |
| #ifndef PCIB_SSID |
| #define PCIB_SSID 0x43841002 |
| #endif |
| |
| /** |
| * USB_PLL_Voltage - CG2 Clock voltage setting. |
| * |
| */ |
| #ifndef USB_PLL_Voltage |
| #define USB_PLL_Voltage 0x10 |
| #endif |
| |
| /** |
| * Spread_Spectrum_Type |
| * |
| * - 0 : Normal platform |
| * - 1 : Ontario platform |
| */ |
| #ifndef Spread_Spectrum_Type |
| #define Spread_Spectrum_Type 0x00 |
| #endif |