src/mainboard/getac/p470/romstage.c - coreboot - Gitiles

 /*
  * This file is part of the coreboot project.
  *
  * Copyright (C) 2007-2009 coresystems GmbH
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; version 2 of
  * the License.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */

 #include <stdint.h>
 #include <arch/io.h>
 #include <device/pnp_ops.h>
 #include <device/pci_ops.h>
 #include <device/pci_def.h>
 #include <cpu/x86/lapic.h>
 #include <pc80/mc146818rtc.h>
 #include <console/console.h>
 #include <cpu/x86/bist.h>
 #include <cpu/intel/romstage.h>
 #include <halt.h>
 #include <northbridge/intel/i945/i945.h>
 #include <northbridge/intel/i945/raminit.h>
 #include <southbridge/intel/i82801gx/i82801gx.h>
 #include "option_table.h"

 static void setup_special_ich7_gpios(void)
 {
 	u32 gpios;

 	printk(BIOS_SPEW, "\n  Initializing drive bay...\n");
 	gpios = inl(DEFAULT_GPIOBASE + 0x38); // GPIO Level 2
 	gpios |= (1 << 0); // GPIO33 = ODD
 	gpios |= (1 << 1); // GPIO34 = IDE_RST#
 	outl(gpios, DEFAULT_GPIOBASE + 0x38);	/* GP_LVL2 */

 	gpios = inl(DEFAULT_GPIOBASE + 0x0c); // GPIO Level
 	gpios &= ~(1 << 13);	// ??
 	outl(gpios, DEFAULT_GPIOBASE + 0x0c);	/* GP_LVL */

 	printk(BIOS_SPEW, "\n  Initializing Ethernet NIC...\n");
 	gpios = inl(DEFAULT_GPIOBASE + 0x0c); // GPIO Level
 	gpios &= ~(1 << 24);	// Enable LAN Power
 	outl(gpios, DEFAULT_GPIOBASE + 0x0c);	/* GP_LVL */
 }

 static void ich7_enable_lpc(void)
 {
 	int lpt_en = 0;
 	if (read_option(lpt, 0) != 0)
 		lpt_en = LPT_LPC_EN;

 	// Enable Serial IRQ
 	pci_write_config8(PCI_DEV(0, 0x1f, 0), SERIRQ_CNTL, 0xd0);
 	// decode range
 	pci_write_config16(PCI_DEV(0, 0x1f, 0), LPC_IO_DEC, 0x0007);
 	// decode range
 	pci_write_config16(PCI_DEV(0, 0x1f, 0), LPC_EN, CNF2_LPC_EN | CNF1_LPC_EN
 			| MC_LPC_EN | KBC_LPC_EN | GAMEH_LPC_EN | GAMEL_LPC_EN
 			| FDD_LPC_EN| lpt_en | COMB_LPC_EN | COMA_LPC_EN);
 	// Enable 0x02e0 - 0x2ff
 	pci_write_config32(PCI_DEV(0, 0x1f, 0), GEN1_DEC, 0x001c02e1);
 	// Enable 0x600 - 0x6ff
 	pci_write_config32(PCI_DEV(0, 0x1f, 0), GEN2_DEC, 0x00fc0601);
 	// Enable 0x68 - 0x6f
 	pci_write_config32(PCI_DEV(0, 0x1f, 0), GEN3_DEC, 0x00040069);
 }

 /* This box has two superios, so enabling serial becomes slightly excessive.
  * We disable a lot of stuff to make sure that there are no conflicts between
  * the two. Also set up the GPIOs from the beginning. This is the "no schematic
  * but safe anyways" method.
  */
 static void pnp_enter_ext_func_mode(pnp_devfn_t dev)
 {
 	unsigned int port = dev >> 8;
 	outb(0x55, port);
 }

 static void pnp_exit_ext_func_mode(pnp_devfn_t dev)
 {
 	unsigned int port = dev >> 8;
 	outb(0xaa, port);
 }

 static void pnp_write_register(pnp_devfn_t dev, int reg, int val)
 {
 	unsigned int port = dev >> 8;
 	outb(reg, port);
 	outb(val, port+1);
 }

 static void early_superio_config(void)
 {
 	pnp_devfn_t dev;

 	dev = PNP_DEV(0x4e, 0x00);

 	pnp_enter_ext_func_mode(dev);
 	pnp_write_register(dev, 0x02, 0x0e); // UART power
 	pnp_write_register(dev, 0x1b, (0x3e8 >> 2)); // UART3 base
 	pnp_write_register(dev, 0x1c, (0x2e8 >> 2)); // UART4 base
 	pnp_write_register(dev, 0x1d, (5 << 4) | 11); // UART3,4 IRQ
 	pnp_write_register(dev, 0x1e, 1); // no 32khz clock
 	pnp_write_register(dev, 0x24, (0x3f8 >> 2)); // UART1 base
 	pnp_write_register(dev, 0x28, (4 << 4) | 0); // UART1,2 IRQ
 	pnp_write_register(dev, 0x2c, 0); // DMA0 FIR
 	pnp_write_register(dev, 0x30, (0x600 >> 4)); // Runtime Register Block Base

 	pnp_write_register(dev, 0x31, 0xce); // GPIO1 DIR
 	pnp_write_register(dev, 0x32, 0x00); // GPIO1 POL
 	pnp_write_register(dev, 0x33, 0x0f); // GPIO2 DIR
 	pnp_write_register(dev, 0x34, 0x00); // GPIO2 POL
 	pnp_write_register(dev, 0x35, 0xa8); // GPIO3 DIR
 	pnp_write_register(dev, 0x36, 0x00); // GPIO3 POL
 	pnp_write_register(dev, 0x37, 0xa8); // GPIO4 DIR
 	pnp_write_register(dev, 0x38, 0x00); // GPIO4 POL

 	pnp_write_register(dev, 0x39, 0x00); // GPIO1 OUT
 	pnp_write_register(dev, 0x40, 0x80); // GPIO2/MISC OUT
 	pnp_write_register(dev, 0x41, 0x00); // GPIO5 OUT
 	pnp_write_register(dev, 0x42, 0xa8); // GPIO5 DIR
 	pnp_write_register(dev, 0x43, 0x00); // GPIO5 POL
 	pnp_write_register(dev, 0x44, 0x00); // GPIO ALT1
 	pnp_write_register(dev, 0x45, 0x50); // GPIO ALT2
 	pnp_write_register(dev, 0x46, 0x00); // GPIO ALT3

 	pnp_write_register(dev, 0x48, 0x55); // GPIO ALT5
 	pnp_write_register(dev, 0x49, 0x55); // GPIO ALT6
 	pnp_write_register(dev, 0x4a, 0x55); // GPIO ALT7
 	pnp_write_register(dev, 0x4b, 0x55); // GPIO ALT8
 	pnp_write_register(dev, 0x4c, 0x55); // GPIO ALT9
 	pnp_write_register(dev, 0x4d, 0x55); // GPIO ALT10

 	pnp_exit_ext_func_mode(dev);
 }

 static void rcba_config(void)
 {
 	/* Set up virtual channel 0 */
 	//RCBA32(0x0014) = 0x80000001;

 	/* Device 1f interrupt pin register */
 	RCBA32(D31IP) = 0x00042220;
 	/* Device 1d interrupt pin register */
 	RCBA32(D28IP) = 0x00214321;

 	/* dev irq route register */
 	RCBA16(D31IR) = 0x0232;
 	RCBA16(D30IR) = 0x3246;
 	RCBA16(D29IR) = 0x0237;
 	RCBA16(D28IR) = 0x3201;
 	RCBA16(D27IR) = 0x3216;

 	/* Enable IOAPIC */
 	RCBA8(OIC) = 0x03;

 	/* Disable unused devices */
 	RCBA32(FD) |= FD_INTLAN;

 	/* Enable PCIe Root Port Clock Gate */
 	// RCBA32(0x341c) = 0x00000001;

 	/* This should probably go into the ACPI enable trap */
 	/* Set up I/O Trap #0 for 0xfe00 (SMIC) */
 	RCBA32(0x1e84) = 0x00020001;
 	RCBA32(0x1e80) = 0x0000fe01;

 	/* Set up I/O Trap #3 for 0x800-0x80c (Trap) */
 	RCBA32(0x1e9c) = 0x000200f0;
 	RCBA32(0x1e98) = 0x000c0801;
 }

 static void early_ich7_init(void)
 {
 	uint8_t reg8;
 	uint32_t reg32;

 	// program secondary mlt XXX byte?
 	pci_write_config8(PCI_DEV(0, 0x1e, 0), 0x1b, 0x20);

 	// reset rtc power status
 	reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa4);
 	reg8 &= ~(1 << 2);
 	pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa4, reg8);

 	// usb transient disconnect
 	reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad);
 	reg8 |= (3 << 0);
 	pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8);

 	reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc);
 	reg32 |= (1 << 29) | (1 << 17);
 	pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32);

 	reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc);
 	reg32 |= (1 << 31) | (1 << 27);
 	pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32);

 	RCBA32(0x0088) = 0x0011d000;
 	RCBA16(0x01fc) = 0x060f;
 	RCBA32(0x01f4) = 0x86000040;
 	RCBA32(0x0214) = 0x10030549;
 	RCBA32(0x0218) = 0x00020504;
 	RCBA8(0x0220) = 0xc5;
 	reg32 = RCBA32(0x3410);
 	reg32 |= (1 << 6);
 	RCBA32(0x3410) = reg32;
 	reg32 = RCBA32(0x3430);
 	reg32 &= ~(3 << 0);
 	reg32 |= (1 << 0);
 	RCBA32(0x3430) = reg32;
 	RCBA16(0x0200) = 0x2008;
 	RCBA8(0x2027) = 0x0d;
 	RCBA16(0x3e08) |= (1 << 7);
 	RCBA16(0x3e48) |= (1 << 7);
 	RCBA32(0x3e0e) |= (1 << 7);
 	RCBA32(0x3e4e) |= (1 << 7);

 	// next step only on ich7m b0 and later:
 	reg32 = RCBA32(0x2034);
 	reg32 &= ~(0x0f << 16);
 	reg32 |= (5 << 16);
 	RCBA32(0x2034) = reg32;
 }

 void mainboard_romstage_entry(unsigned long bist)
 {
 	int s3resume = 0;

 	if (bist == 0)
 		enable_lapic();

 #if 0
 	/* Force PCIRST# */
 	pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, SBR);
 	udelay(200 * 1000);
 	pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, 0);
 #endif

 	ich7_enable_lpc();
 	early_superio_config();

 	/* Set up the console */
 	console_init();

 	/* Halt if there was a built in self test failure */
 	report_bist_failure(bist);

 	if (MCHBAR16(SSKPD) == 0xCAFE) {
 		printk(BIOS_DEBUG, "soft reset detected, rebooting properly\n");
 		outb(0x6, 0xcf9);
 		halt();
 	}

 	/* Perform some early chipset initialization required
 	 * before RAM initialization can work
 	 */
 	i945_early_initialization();

 	setup_special_ich7_gpios();

 	s3resume = southbridge_detect_s3_resume();

 	/* Enable SPD ROMs and DDR-II DRAM */
 	enable_smbus();

 	if (CONFIG(DEBUG_RAM_SETUP))
 		dump_spd_registers();

 	sdram_initialize(s3resume ? 2 : 0, NULL);

 	/* Perform some initialization that must run before stage2 */
 	early_ich7_init();

 	/* This should probably go away. Until now it is required
 	 * and mainboard specific
 	 */
 	rcba_config();

 	/* Chipset Errata! */
 	fixup_i945_errata();

 	/* Initialize the internal PCIe links before we go into stage2 */
 	i945_late_initialization(s3resume);
 }
	/*
	* This file is part of the coreboot project.
	*
	* Copyright (C) 2007-2009 coresystems GmbH
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; version 2 of
	* the License.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*/

	#include <stdint.h>
	#include <arch/io.h>
	#include <device/pnp_ops.h>
	#include <device/pci_ops.h>
	#include <device/pci_def.h>
	#include <cpu/x86/lapic.h>
	#include <pc80/mc146818rtc.h>
	#include <console/console.h>
	#include <cpu/x86/bist.h>
	#include <cpu/intel/romstage.h>
	#include <halt.h>
	#include <northbridge/intel/i945/i945.h>
	#include <northbridge/intel/i945/raminit.h>
	#include <southbridge/intel/i82801gx/i82801gx.h>
	#include "option_table.h"

	static void setup_special_ich7_gpios(void)
	{
	u32 gpios;

	printk(BIOS_SPEW, "\n Initializing drive bay...\n");
	gpios = inl(DEFAULT_GPIOBASE + 0x38); // GPIO Level 2
	gpios \|= (1 << 0); // GPIO33 = ODD
	gpios \|= (1 << 1); // GPIO34 = IDE_RST#
	outl(gpios, DEFAULT_GPIOBASE + 0x38); /* GP_LVL2 */

	gpios = inl(DEFAULT_GPIOBASE + 0x0c); // GPIO Level
	gpios &= ~(1 << 13); // ??
	outl(gpios, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */

	printk(BIOS_SPEW, "\n Initializing Ethernet NIC...\n");
	gpios = inl(DEFAULT_GPIOBASE + 0x0c); // GPIO Level
	gpios &= ~(1 << 24); // Enable LAN Power
	outl(gpios, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */
	}

	static void ich7_enable_lpc(void)
	{
	int lpt_en = 0;
	if (read_option(lpt, 0) != 0)
	lpt_en = LPT_LPC_EN;

	// Enable Serial IRQ
	pci_write_config8(PCI_DEV(0, 0x1f, 0), SERIRQ_CNTL, 0xd0);
	// decode range
	pci_write_config16(PCI_DEV(0, 0x1f, 0), LPC_IO_DEC, 0x0007);
	// decode range
	pci_write_config16(PCI_DEV(0, 0x1f, 0), LPC_EN, CNF2_LPC_EN \| CNF1_LPC_EN
	\| MC_LPC_EN \| KBC_LPC_EN \| GAMEH_LPC_EN \| GAMEL_LPC_EN
	\| FDD_LPC_EN\| lpt_en \| COMB_LPC_EN \| COMA_LPC_EN);
	// Enable 0x02e0 - 0x2ff
	pci_write_config32(PCI_DEV(0, 0x1f, 0), GEN1_DEC, 0x001c02e1);
	// Enable 0x600 - 0x6ff
	pci_write_config32(PCI_DEV(0, 0x1f, 0), GEN2_DEC, 0x00fc0601);
	// Enable 0x68 - 0x6f
	pci_write_config32(PCI_DEV(0, 0x1f, 0), GEN3_DEC, 0x00040069);
	}

	/* This box has two superios, so enabling serial becomes slightly excessive.
	* We disable a lot of stuff to make sure that there are no conflicts between
	* the two. Also set up the GPIOs from the beginning. This is the "no schematic
	* but safe anyways" method.
	*/
	static void pnp_enter_ext_func_mode(pnp_devfn_t dev)
	{
	unsigned int port = dev >> 8;
	outb(0x55, port);
	}

	static void pnp_exit_ext_func_mode(pnp_devfn_t dev)
	{
	unsigned int port = dev >> 8;
	outb(0xaa, port);
	}

	static void pnp_write_register(pnp_devfn_t dev, int reg, int val)
	{
	unsigned int port = dev >> 8;
	outb(reg, port);
	outb(val, port+1);
	}

	static void early_superio_config(void)
	{
	pnp_devfn_t dev;

	dev = PNP_DEV(0x4e, 0x00);

	pnp_enter_ext_func_mode(dev);
	pnp_write_register(dev, 0x02, 0x0e); // UART power
	pnp_write_register(dev, 0x1b, (0x3e8 >> 2)); // UART3 base
	pnp_write_register(dev, 0x1c, (0x2e8 >> 2)); // UART4 base
	pnp_write_register(dev, 0x1d, (5 << 4) \| 11); // UART3,4 IRQ
	pnp_write_register(dev, 0x1e, 1); // no 32khz clock
	pnp_write_register(dev, 0x24, (0x3f8 >> 2)); // UART1 base
	pnp_write_register(dev, 0x28, (4 << 4) \| 0); // UART1,2 IRQ
	pnp_write_register(dev, 0x2c, 0); // DMA0 FIR
	pnp_write_register(dev, 0x30, (0x600 >> 4)); // Runtime Register Block Base

	pnp_write_register(dev, 0x31, 0xce); // GPIO1 DIR
	pnp_write_register(dev, 0x32, 0x00); // GPIO1 POL
	pnp_write_register(dev, 0x33, 0x0f); // GPIO2 DIR
	pnp_write_register(dev, 0x34, 0x00); // GPIO2 POL
	pnp_write_register(dev, 0x35, 0xa8); // GPIO3 DIR
	pnp_write_register(dev, 0x36, 0x00); // GPIO3 POL
	pnp_write_register(dev, 0x37, 0xa8); // GPIO4 DIR
	pnp_write_register(dev, 0x38, 0x00); // GPIO4 POL

	pnp_write_register(dev, 0x39, 0x00); // GPIO1 OUT
	pnp_write_register(dev, 0x40, 0x80); // GPIO2/MISC OUT
	pnp_write_register(dev, 0x41, 0x00); // GPIO5 OUT
	pnp_write_register(dev, 0x42, 0xa8); // GPIO5 DIR
	pnp_write_register(dev, 0x43, 0x00); // GPIO5 POL
	pnp_write_register(dev, 0x44, 0x00); // GPIO ALT1
	pnp_write_register(dev, 0x45, 0x50); // GPIO ALT2
	pnp_write_register(dev, 0x46, 0x00); // GPIO ALT3

	pnp_write_register(dev, 0x48, 0x55); // GPIO ALT5
	pnp_write_register(dev, 0x49, 0x55); // GPIO ALT6
	pnp_write_register(dev, 0x4a, 0x55); // GPIO ALT7
	pnp_write_register(dev, 0x4b, 0x55); // GPIO ALT8
	pnp_write_register(dev, 0x4c, 0x55); // GPIO ALT9
	pnp_write_register(dev, 0x4d, 0x55); // GPIO ALT10

	pnp_exit_ext_func_mode(dev);
	}

	static void rcba_config(void)
	{
	/* Set up virtual channel 0 */
	//RCBA32(0x0014) = 0x80000001;

	/* Device 1f interrupt pin register */
	RCBA32(D31IP) = 0x00042220;
	/* Device 1d interrupt pin register */
	RCBA32(D28IP) = 0x00214321;

	/* dev irq route register */
	RCBA16(D31IR) = 0x0232;
	RCBA16(D30IR) = 0x3246;
	RCBA16(D29IR) = 0x0237;
	RCBA16(D28IR) = 0x3201;
	RCBA16(D27IR) = 0x3216;

	/* Enable IOAPIC */
	RCBA8(OIC) = 0x03;

	/* Disable unused devices */
	RCBA32(FD) \|= FD_INTLAN;

	/* Enable PCIe Root Port Clock Gate */
	// RCBA32(0x341c) = 0x00000001;

	/* This should probably go into the ACPI enable trap */
	/* Set up I/O Trap #0 for 0xfe00 (SMIC) */
	RCBA32(0x1e84) = 0x00020001;
	RCBA32(0x1e80) = 0x0000fe01;

	/* Set up I/O Trap #3 for 0x800-0x80c (Trap) */
	RCBA32(0x1e9c) = 0x000200f0;
	RCBA32(0x1e98) = 0x000c0801;
	}

	static void early_ich7_init(void)
	{
	uint8_t reg8;
	uint32_t reg32;

	// program secondary mlt XXX byte?
	pci_write_config8(PCI_DEV(0, 0x1e, 0), 0x1b, 0x20);

	// reset rtc power status
	reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa4);
	reg8 &= ~(1 << 2);
	pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa4, reg8);

	// usb transient disconnect
	reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad);
	reg8 \|= (3 << 0);
	pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8);

	reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc);
	reg32 \|= (1 << 29) \| (1 << 17);
	pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32);

	reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc);
	reg32 \|= (1 << 31) \| (1 << 27);
	pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32);

	RCBA32(0x0088) = 0x0011d000;
	RCBA16(0x01fc) = 0x060f;
	RCBA32(0x01f4) = 0x86000040;
	RCBA32(0x0214) = 0x10030549;
	RCBA32(0x0218) = 0x00020504;
	RCBA8(0x0220) = 0xc5;
	reg32 = RCBA32(0x3410);
	reg32 \|= (1 << 6);
	RCBA32(0x3410) = reg32;
	reg32 = RCBA32(0x3430);
	reg32 &= ~(3 << 0);
	reg32 \|= (1 << 0);
	RCBA32(0x3430) = reg32;
	RCBA16(0x0200) = 0x2008;
	RCBA8(0x2027) = 0x0d;
	RCBA16(0x3e08) \|= (1 << 7);
	RCBA16(0x3e48) \|= (1 << 7);
	RCBA32(0x3e0e) \|= (1 << 7);
	RCBA32(0x3e4e) \|= (1 << 7);

	// next step only on ich7m b0 and later:
	reg32 = RCBA32(0x2034);
	reg32 &= ~(0x0f << 16);
	reg32 \|= (5 << 16);
	RCBA32(0x2034) = reg32;
	}

	void mainboard_romstage_entry(unsigned long bist)
	{
	int s3resume = 0;

	if (bist == 0)
	enable_lapic();

	#if 0
	/* Force PCIRST# */
	pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, SBR);
	udelay(200 * 1000);
	pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, 0);
	#endif

	ich7_enable_lpc();
	early_superio_config();

	/* Set up the console */
	console_init();

	/* Halt if there was a built in self test failure */
	report_bist_failure(bist);

	if (MCHBAR16(SSKPD) == 0xCAFE) {
	printk(BIOS_DEBUG, "soft reset detected, rebooting properly\n");
	outb(0x6, 0xcf9);
	halt();
	}

	/* Perform some early chipset initialization required
	* before RAM initialization can work
	*/
	i945_early_initialization();

	setup_special_ich7_gpios();

	s3resume = southbridge_detect_s3_resume();

	/* Enable SPD ROMs and DDR-II DRAM */
	enable_smbus();

	if (CONFIG(DEBUG_RAM_SETUP))
	dump_spd_registers();

	sdram_initialize(s3resume ? 2 : 0, NULL);

	/* Perform some initialization that must run before stage2 */
	early_ich7_init();

	/* This should probably go away. Until now it is required
	* and mainboard specific
	*/
	rcba_config();

	/* Chipset Errata! */
	fixup_i945_errata();

	/* Initialize the internal PCIe links before we go into stage2 */
	i945_late_initialization(s3resume);
	}