| /* SPDX-License-Identifier: GPL-2.0-only */ |
| /* This file is part of the coreboot project. */ |
| |
| #include <arch/lib_helpers.h> |
| #include <arch/stages.h> |
| #include <cbmem.h> |
| #include <console/console.h> |
| #include <device/mmio.h> |
| #include <gic.h> |
| #include <soc/addressmap.h> |
| #include <soc/clock.h> |
| #include <soc/mmu_operations.h> |
| #include <soc/mtc.h> |
| |
| static void arm64_arch_timer_init(void) |
| { |
| uint32_t freq = clock_get_osc_khz() * 1000; |
| // Set the cntfrq register. |
| raw_write_cntfrq_el0(freq); |
| } |
| |
| static void mselect_enable_wrap(void) |
| { |
| uint32_t reg; |
| |
| #define ERR_RESP_EN_SLAVE1 (0x1 << 24) |
| #define ERR_RESP_EN_SLAVE2 (0x1 << 25) |
| #define WRAP_TO_INCR_SLAVE0 (0x1 << 27) |
| #define WRAP_TO_INCR_SLAVE1 (0x1 << 28) |
| #define WRAP_TO_INCR_SLAVE2 (0x1 << 29) |
| |
| reg = read32((void *)TEGRA_MSELECT_CONFIG); |
| /* Disable error mechanism */ |
| reg &= ~(ERR_RESP_EN_SLAVE1 | ERR_RESP_EN_SLAVE2); |
| /* Enable WRAP type conversion */ |
| reg |= (WRAP_TO_INCR_SLAVE0 | WRAP_TO_INCR_SLAVE1 | |
| WRAP_TO_INCR_SLAVE2); |
| write32((void *)TEGRA_MSELECT_CONFIG, reg); |
| } |
| |
| /* Tegra-specific entry point, called from assembly in stage_entry.S */ |
| void ramstage_entry(void); |
| void ramstage_entry(void) |
| { |
| /* TODO: Is this still needed? */ |
| gic_init(); |
| |
| /* TODO: Move arch timer setup to BL31? */ |
| arm64_arch_timer_init(); |
| |
| /* Enable WRAP to INCR burst type conversion in MSELECT */ |
| mselect_enable_wrap(); |
| |
| /* TODO: Move TrustZone setup to BL31? */ |
| trustzone_region_init(); |
| |
| tegra210_mmu_init(); |
| |
| clock_init_arm_generic_timer(); |
| |
| if (tegra210_run_mtc() != 0) |
| printk(BIOS_ERR, "MTC: No training data.\n"); |
| |
| /* Ramstage is run on a different core, so passing cbmem_top |
| via calling arguments is not an option, but it is not a problem |
| to call cbmem_top_chipset() again here to populate _cbmem_top_ptr. */ |
| _cbmem_top_ptr = (uintptr_t)cbmem_top_chipset(); |
| |
| /* Jump to boot state machine in common code. */ |
| main(); |
| } |