| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <amdblocks/acpimmio.h> |
| #include <console/console.h> |
| #include <arch/io.h> |
| #include <device/mmio.h> |
| #include <acpi/acpi.h> |
| #include <device/device.h> |
| #include <device/pci.h> |
| #include <device/pci_def.h> |
| #include <device/pci_ids.h> |
| #include <device/pci_ops.h> |
| #include <types.h> |
| |
| #include "hudson.h" |
| #include "smbus.h" |
| #include "smi.h" |
| #include "fchec.h" |
| |
| int acpi_get_sleep_type(void) |
| { |
| u16 tmp = inw(ACPI_PM1_CNT_BLK); |
| tmp = ((tmp & (7 << 10)) >> 10); |
| return (int)tmp; |
| } |
| |
| void hudson_enable(struct device *dev) |
| { |
| printk(BIOS_DEBUG, "hudson_enable()\n"); |
| switch (dev->path.pci.devfn) { |
| case PCI_DEVFN(0x14, 7): /* SD */ |
| if (dev->enabled == 0) { |
| u32 sd_device_id = pci_read_config16(dev, PCI_DEVICE_ID); |
| /* turn off the SDHC controller in the PM reg */ |
| u8 reg8; |
| if (sd_device_id == PCI_DEVICE_ID_AMD_HUDSON_SD) { |
| reg8 = pm_read8(PM_HUD_SD_FLASH_CTRL); |
| reg8 &= ~BIT(0); |
| pm_write8(PM_HUD_SD_FLASH_CTRL, reg8); |
| } |
| else if (sd_device_id == PCI_DEVICE_ID_AMD_YANGTZE_SD) { |
| reg8 = pm_read8(PM_YANG_SD_FLASH_CTRL); |
| reg8 &= ~BIT(0); |
| pm_write8(PM_YANG_SD_FLASH_CTRL, reg8); |
| } |
| /* remove device 0:14.7 from PCI space */ |
| reg8 = pm_read8(PM_MANUAL_RESET); |
| reg8 &= ~BIT(6); |
| pm_write8(PM_MANUAL_RESET, reg8); |
| } |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static void hudson_init_acpi_ports(void) |
| { |
| /* We use some of these ports in SMM regardless of whether or not |
| * ACPI tables are generated. Enable these ports indiscriminately. |
| */ |
| |
| pm_write16(PM_EVT_BLK, ACPI_PM_EVT_BLK); |
| pm_write16(PM1_CNT_BLK, ACPI_PM1_CNT_BLK); |
| pm_write16(PM_TMR_BLK, ACPI_PM_TMR_BLK); |
| pm_write16(PM_GPE0_BLK, ACPI_GPE0_BLK); |
| /* CpuControl is in \_PR.CP00, 6 bytes */ |
| pm_write16(PM_CPU_CTRL, ACPI_CPU_CONTROL); |
| |
| if (CONFIG(HAVE_SMI_HANDLER)) { |
| pm_write16(PM_ACPI_SMI_CMD, ACPI_SMI_CTL_PORT); |
| hudson_enable_acpi_cmd_smi(); |
| } else { |
| pm_write16(PM_ACPI_SMI_CMD, 0); |
| } |
| |
| /* AcpiDecodeEnable, When set, SB uses the contents of the PM registers |
| * at index 60-6B to decode ACPI I/O address. AcpiSmiEn & SmiCmdEn |
| */ |
| pm_write8(PM_ACPI_CONF, BIT(0) | BIT(1) | BIT(4) | BIT(2)); |
| } |
| |
| static void hudson_init(void *chip_info) |
| { |
| hudson_init_acpi_ports(); |
| } |
| |
| static void hudson_final(void *chip_info) |
| { |
| if (CONFIG(HUDSON_IMC_FWM)) { |
| agesawrapper_fchecfancontrolservice(); |
| if (!CONFIG(ACPI_ENABLE_THERMAL_ZONE)) |
| enable_imc_thermal_zone(); |
| } |
| } |
| |
| struct chip_operations southbridge_amd_pi_hudson_ops = { |
| CHIP_NAME("ATI HUDSON") |
| .enable_dev = hudson_enable, |
| .init = hudson_init, |
| .final = hudson_final |
| }; |