| chip soc/intel/meteorlake |
| |
| # GPE configuration |
| register "pmc_gpe0_dw0" = "GPP_D" |
| register "pmc_gpe0_dw1" = "GPP_E" |
| register "pmc_gpe0_dw2" = "GPP_F" |
| |
| # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f |
| register "gen1_dec" = "0x00fc0801" |
| register "gen2_dec" = "0x000c0201" |
| # EC memory map range is 0x900-0x9ff |
| register "gen3_dec" = "0x00fc0901" |
| |
| register "usb2_ports[0]" = "USB2_PORT_EMPTY" # Disable USB2.0 Port 0 |
| register "usb2_ports[1]" = "USB2_PORT_EMPTY" # Disable USB2.0 Port 1 |
| register "usb2_ports[2]" = "USB2_PORT_EMPTY" # Disable USB2.0 Port 2 |
| register "usb2_ports[3]" = "USB2_PORT_EMPTY" # Disable USB2.0 Port 3 |
| register "usb2_ports[4]" = "USB2_PORT_EMPTY" # Disable USB2.0 Port 4 |
| register "usb2_ports[5]" = "USB2_PORT_EMPTY" # Disable USB2.0 Port 5 |
| register "usb2_ports[6]" = "USB2_PORT_EMPTY" # Disable USB2.0 Port 6 |
| register "usb2_ports[7]" = "USB2_PORT_EMPTY" # Disable USB2.0 Port 7 |
| register "usb2_ports[8]" = "USB2_PORT_EMPTY" # Disable USB2.0 Port 8 |
| register "usb2_ports[9]" = "USB2_PORT_EMPTY" # Disable USB2.0 Port 9 |
| |
| register "usb3_ports[0]" = "USB3_PORT_EMPTY" # Disable USB3.0 Port 0 |
| register "usb3_ports[1]" = "USB3_PORT_EMPTY" # Disable USB3.0 Port 1 |
| |
| register "tcss_ports[0]" = "TCSS_PORT_EMPTY" # Disable USB-C Port 0 |
| register "tcss_ports[1]" = "TCSS_PORT_EMPTY" # Disable USB-C Port 1 |
| register "tcss_ports[2]" = "TCSS_PORT_EMPTY" # Disable USB-C Port 2 |
| register "tcss_ports[3]" = "TCSS_PORT_EMPTY" # Disable USB-C Port 3 |
| |
| # S0ix enable |
| register "s0ix_enable" = "1" |
| |
| # Disable C1 C-state auto-demotion |
| register "disable_c1_state_auto_demotion" = "1" |
| |
| # Disable PKGC-state demotion |
| register "disable_package_c_state_demotion" = "1" |
| |
| # Enable Energy Reporting |
| register "pch_pm_energy_report_enable" = "1" |
| |
| # DPTF enable |
| register "dptf_enable" = "1" |
| |
| # Temporary setting TCC of 100C = Tj max (110) - TCC_Offset (10) |
| register "tcc_offset" = "10" |
| |
| # Enable CNVi BT |
| register "cnvi_bt_core" = "true" |
| |
| register "sagv" = "SAGV_ENABLED" |
| |
| register "sagv_freq_mhz[0]" = "2133" |
| register "sagv_gear[0]" = "4" |
| |
| register "sagv_freq_mhz[1]" = "4267" |
| register "sagv_gear[1]" = "4" |
| |
| register "sagv_freq_mhz[2]" = "6000" |
| register "sagv_gear[2]" = "4" |
| |
| register "sagv_freq_mhz[3]" = "6400" |
| register "sagv_gear[3]" = "4" |
| |
| # set EPP to 45%: 45 * 256/100 = 115 = 0x73 |
| register "enable_energy_perf_pref" = "true" |
| register "energy_perf_pref_value" = "0x73" |
| |
| # Set on-board graphics as primary display |
| register "skip_ext_gfx_scan" = "1" |
| |
| register "serial_io_uart_mode" = "{ |
| [PchSerialIoIndexUART0] = PchSerialIoPci, |
| [PchSerialIoIndexUART1] = PchSerialIoDisabled, |
| [PchSerialIoIndexUART2] = PchSerialIoDisabled, |
| }" |
| |
| register "pch_hda_dsp_enable" = "1" |
| register "pch_hda_idisp_link_tmode" = "HDA_TMODE_8T" |
| register "pch_hda_idisp_link_frequency" = "HDA_LINKFREQ_96MHZ" |
| register "pch_hda_idisp_codec_enable" = "1" |
| |
| device domain 0 on |
| device ref igpu on end |
| device ref dtt on end |
| device ref vpu on end |
| device ref ioe_shared_sram on end |
| device ref xhci on end |
| device ref pmc_shared_sram on end |
| device ref heci1 on end |
| device ref uart0 on end |
| device ref soc_espi on |
| chip ec/google/chromeec |
| device pnp 0c09.0 on end |
| end |
| end |
| end |
| end |