| config SOC_INTEL_CANNONLAKE_BASE |
| bool |
| |
| config SOC_INTEL_CANNONLAKE_ALTERNATE_HEADERS |
| bool |
| default y if SOC_INTEL_CANNONLAKE_BASE && !SOC_INTEL_CANNONLAKE |
| help |
| Single Kconfig option to select common base Cannonlake support. |
| This Kconfig will help to select majority of CNL SoC features. |
| Major difference that exist today between |
| SOC_INTEL_CANNONLAKE_ALTERNATE_HEADERS and SOC_INTEL_CANNONLAKE Kconfig |
| are in FSP Header Files. Hence this Kconfig might help to select |
| required SoC support FSP headers. Any future Intel SoC would |
| like to make use of CNL support might just select this Kconfig. |
| |
| config SOC_INTEL_CANNONLAKE |
| bool |
| select SOC_INTEL_CANNONLAKE_BASE |
| select MICROCODE_BLOB_NOT_IN_BLOB_REPO |
| help |
| Intel Cannonlake support |
| |
| config SOC_INTEL_COFFEELAKE |
| bool |
| select SOC_INTEL_CANNONLAKE_BASE |
| select FSP_USES_CB_STACK |
| select HAVE_INTEL_FSP_REPO |
| select SOC_INTEL_CONFIGURE_DDI_A_4_LANES |
| help |
| Intel Coffeelake support |
| |
| config SOC_INTEL_WHISKEYLAKE |
| bool |
| select SOC_INTEL_CANNONLAKE_BASE |
| select FSP_USES_CB_STACK |
| select HAVE_INTEL_FSP_REPO |
| select SOC_INTEL_CONFIGURE_DDI_A_4_LANES |
| help |
| Intel Whiskeylake support |
| |
| config SOC_INTEL_COMETLAKE |
| bool |
| select SOC_INTEL_CANNONLAKE_BASE |
| select FSP_USES_CB_STACK |
| select HAVE_INTEL_FSP_REPO |
| select SOC_INTEL_CONFIGURE_DDI_A_4_LANES |
| help |
| Intel Cometlake support |
| |
| config SOC_INTEL_COMETLAKE_1 |
| bool |
| select SOC_INTEL_COMETLAKE |
| |
| config SOC_INTEL_COMETLAKE_2 |
| bool |
| select SOC_INTEL_COMETLAKE |
| |
| config SOC_INTEL_COMETLAKE_S |
| bool |
| select SOC_INTEL_COMETLAKE |
| |
| config SOC_INTEL_COMETLAKE_V |
| bool |
| select SOC_INTEL_COMETLAKE |
| |
| config SOC_INTEL_CANNONLAKE_PCH_H |
| bool |
| help |
| Choose this option if you have a PCH-H chipset. |
| |
| if SOC_INTEL_CANNONLAKE_BASE |
| |
| config CPU_SPECIFIC_OPTIONS |
| def_bool y |
| select ACPI_INTEL_HARDWARE_SLEEP_VALUES |
| select ACPI_NHLT |
| select ARCH_ALL_STAGES_X86_32 |
| select BOOT_DEVICE_SUPPORTS_WRITES |
| select CACHE_MRC_SETTINGS |
| select CPU_INTEL_COMMON |
| select CPU_INTEL_FIRMWARE_INTERFACE_TABLE |
| select CPU_SUPPORTS_PM_TIMER_EMULATION |
| select FSP_COMPRESS_FSP_S_LZMA |
| select FSP_M_XIP |
| select GENERIC_GPIO_LIB |
| select HAVE_FSP_GOP |
| select HAVE_FSP_LOGO_SUPPORT |
| select INTEL_DESCRIPTOR_MODE_CAPABLE |
| select HAVE_SMI_HANDLER |
| select IDT_IN_EVERY_STAGE |
| select INTEL_GMA_ACPI |
| select INTEL_GMA_ADD_VBT if RUN_FSP_GOP |
| select IOAPIC |
| select MRC_SETTINGS_PROTECT |
| select PARALLEL_MP |
| select PARALLEL_MP_AP_WORK |
| select PLATFORM_USES_FSP2_0 |
| select REG_SCRIPT |
| select PMC_GLOBAL_RESET_ENABLE_LOCK |
| select PMC_LOW_POWER_MODE_PROGRAM |
| select SOC_INTEL_COMMON |
| select SOC_INTEL_COMMON_ACPI_WAKE_SOURCE |
| select SOC_INTEL_COMMON_BLOCK |
| select SOC_INTEL_COMMON_BLOCK_ACPI |
| select SOC_INTEL_COMMON_BLOCK_CHIP_CONFIG |
| select SOC_INTEL_COMMON_BLOCK_CPU |
| select SOC_INTEL_COMMON_BLOCK_CPU_MPINIT |
| select SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT |
| select SOC_INTEL_COMMON_BLOCK_GSPI_VERSION_2 |
| select SOC_INTEL_COMMON_BLOCK_HDA |
| select SOC_INTEL_COMMON_BLOCK_SA |
| select SOC_INTEL_COMMON_BLOCK_SCS |
| select SOC_INTEL_COMMON_BLOCK_XHCI |
| select SOC_INTEL_COMMON_BLOCK_XHCI_ELOG |
| select SOC_INTEL_COMMON_BLOCK_SMM |
| select SOC_INTEL_COMMON_BLOCK_SMM_IO_TRAP |
| select SOC_INTEL_COMMON_BLOCK_THERMAL |
| select SOC_INTEL_COMMON_PCH_BASE |
| select SOC_INTEL_COMMON_NHLT |
| select SOC_INTEL_COMMON_RESET |
| select SOC_INTEL_COMMON_BLOCK_POWER_LIMIT |
| select SSE2 |
| select SUPPORT_CPU_UCODE_IN_CBFS |
| select TSC_MONOTONIC_TIMER |
| select UDELAY_TSC |
| select UDK_2017_BINDING |
| select DISPLAY_FSP_VERSION_INFO |
| select FSP_T_XIP if FSP_CAR |
| select HECI_DISABLE_USING_SMM if !SOC_INTEL_COFFEELAKE && !SOC_INTEL_WHISKEYLAKE && !SOC_INTEL_COMETLAKE |
| |
| config MAX_CPUS |
| int |
| default 12 |
| |
| config DCACHE_RAM_BASE |
| default 0xfef00000 |
| |
| config DCACHE_RAM_SIZE |
| default 0x40000 |
| help |
| The size of the cache-as-ram region required during bootblock |
| and/or romstage. |
| |
| config DCACHE_BSP_STACK_SIZE |
| hex |
| default 0x20400 if FSP_USES_CB_STACK |
| default 0x4000 |
| help |
| The amount of anticipated stack usage in CAR by bootblock and |
| other stages. In the case of FSP_USES_CB_STACK default value will be |
| sum of FSP-M stack requirement (128KiB) and CB romstage stack requirement (~1KiB). |
| |
| config FSP_TEMP_RAM_SIZE |
| hex |
| depends on FSP_USES_CB_STACK |
| default 0x10000 |
| help |
| The amount of anticipated heap usage in CAR by FSP. |
| Refer to Platform FSP integration guide document to know |
| the exact FSP requirement for Heap setup. |
| |
| config IFD_CHIPSET |
| string |
| default "cnl" |
| |
| config IED_REGION_SIZE |
| hex |
| default 0x400000 |
| |
| config HEAP_SIZE |
| hex |
| default 0x8000 |
| |
| config NHLT_DMIC_1CH_16B |
| bool |
| depends on ACPI_NHLT |
| default n |
| help |
| Include DSP firmware settings for 1 channel 16B DMIC array. |
| |
| config NHLT_DMIC_2CH_16B |
| bool |
| depends on ACPI_NHLT |
| default n |
| help |
| Include DSP firmware settings for 2 channel 16B DMIC array. |
| |
| config NHLT_DMIC_4CH_16B |
| bool |
| depends on ACPI_NHLT |
| default n |
| help |
| Include DSP firmware settings for 4 channel 16B DMIC array. |
| |
| config NHLT_MAX98357 |
| bool |
| depends on ACPI_NHLT |
| default n |
| help |
| Include DSP firmware settings for headset codec. |
| |
| config NHLT_MAX98373 |
| bool |
| depends on ACPI_NHLT |
| default n |
| help |
| Include DSP firmware settings for headset codec. |
| |
| config NHLT_DA7219 |
| bool |
| depends on ACPI_NHLT |
| default n |
| help |
| Include DSP firmware settings for headset codec. |
| |
| config MAX_ROOT_PORTS |
| int |
| default 24 if SOC_INTEL_CANNONLAKE_PCH_H |
| default 16 |
| |
| config MAX_PCIE_CLOCKS |
| int |
| default 16 if SOC_INTEL_CANNONLAKE_PCH_H |
| default 6 |
| |
| config SMM_TSEG_SIZE |
| hex |
| default 0x800000 |
| |
| config SMM_RESERVED_SIZE |
| hex |
| default 0x200000 |
| |
| config PCR_BASE_ADDRESS |
| hex |
| default 0xfd000000 |
| help |
| This option allows you to select MMIO Base Address of sideband bus. |
| |
| config CPU_BCLK_MHZ |
| int |
| default 100 |
| |
| config SOC_INTEL_COMMON_BLOCK_GSPI_CLOCK_MHZ |
| int |
| default 120 |
| |
| config CPU_XTAL_HZ |
| default 24000000 |
| |
| config DRIVERS_I2C_DESIGNWARE_CLOCK_MHZ |
| int |
| default 216 |
| |
| config SOC_INTEL_COMMON_BLOCK_GSPI_MAX |
| int |
| default 3 |
| |
| config SOC_INTEL_I2C_DEV_MAX |
| int |
| default 4 if SOC_INTEL_CANNONLAKE_PCH_H |
| default 6 |
| |
| config CONSOLE_UART_BASE_ADDRESS |
| hex |
| default 0xfe032000 |
| depends on INTEL_LPSS_UART_FOR_CONSOLE |
| |
| # Clock divider parameters for 115200 baud rate |
| config SOC_INTEL_COMMON_LPSS_UART_CLK_M_VAL |
| hex |
| default 0x30 |
| |
| config SOC_INTEL_COMMON_LPSS_UART_CLK_N_VAL |
| hex |
| default 0xc35 |
| |
| config CHROMEOS |
| select CHROMEOS_RAMOOPS_DYNAMIC |
| |
| config VBOOT |
| select VBOOT_SEPARATE_VERSTAGE |
| select VBOOT_MUST_REQUEST_DISPLAY |
| select VBOOT_STARTS_IN_BOOTBLOCK |
| select VBOOT_VBNV_CMOS |
| select VBOOT_VBNV_CMOS_BACKUP_TO_FLASH |
| |
| config C_ENV_BOOTBLOCK_SIZE |
| hex |
| default 0xC000 |
| |
| config CBFS_SIZE |
| hex |
| default 0x200000 |
| |
| config MB_HAS_ACTIVE_HIGH_SD_PWR_ENABLE |
| bool |
| default n |
| help |
| Select this if the board has a SD_PWR_ENABLE pin connected to a |
| active high sensing load switch to turn on power to the card reader. |
| This will enable a workaround in ASL _PS3 and _PS0 methods to force |
| SD_PWR_ENABLE to stay low in D3. |
| |
| choice |
| prompt "Cache-as-ram implementation" |
| default USE_CANNONLAKE_CAR_NEM_ENHANCED |
| help |
| This option allows you to select how cache-as-ram (CAR) is set up. |
| |
| config USE_CANNONLAKE_CAR_NEM_ENHANCED |
| bool "Enhanced Non-evict mode" |
| select SOC_INTEL_COMMON_BLOCK_CAR |
| select USE_CAR_NEM_ENHANCED_V1 |
| help |
| A current limitation of NEM (Non-Evict mode) is that code and data |
| sizes are derived from the requirement to not write out any modified |
| cache line. With NEM, if there is no physical memory behind the |
| cached area, the modified data will be lost and NEM results will be |
| inconsistent. ENHANCED NEM guarantees that modified data is always |
| kept in cache while clean data is replaced. |
| |
| config USE_CANNONLAKE_FSP_CAR |
| bool "Use FSP CAR" |
| select FSP_CAR |
| help |
| Use FSP APIs to initialize and tear down the Cache-As-Ram. |
| |
| endchoice |
| |
| config FSP_HEADER_PATH |
| default "3rdparty/fsp/CoffeeLakeFspBinPkg/Include/" if SOC_INTEL_COFFEELAKE || SOC_INTEL_WHISKEYLAKE |
| default "3rdparty/fsp/CometLakeFspBinPkg/CometLake1/Include/" if SOC_INTEL_COMETLAKE_1 |
| default "3rdparty/fsp/CometLakeFspBinPkg/CometLake2/Include/" if SOC_INTEL_COMETLAKE_2 |
| default "3rdparty/fsp/CometLakeFspBinPkg/CometLakeS/Include/" if SOC_INTEL_COMETLAKE_S |
| default "3rdparty/fsp/CometLakeFspBinPkg/CometLakeV/Include/" if SOC_INTEL_COMETLAKE_V |
| default "src/vendorcode/intel/fsp/fsp2_0/cannonlake/" if SOC_INTEL_CANNONLAKE |
| |
| config FSP_FD_PATH |
| default "3rdparty/fsp/CoffeeLakeFspBinPkg/Fsp.fd" if SOC_INTEL_COFFEELAKE || SOC_INTEL_WHISKEYLAKE |
| default "3rdparty/fsp/CometLakeFspBinPkg/CometLake1/Fsp.fd" if SOC_INTEL_COMETLAKE_1 |
| default "3rdparty/fsp/CometLakeFspBinPkg/CometLake2/Fsp.fd" if SOC_INTEL_COMETLAKE_2 |
| default "3rdparty/fsp/CometLakeFspBinPkg/CometLakeS/Fsp.fd" if SOC_INTEL_COMETLAKE_S |
| default "3rdparty/fsp/CometLakeFspBinPkg/CometLakeV/Fsp.fd" if SOC_INTEL_COMETLAKE_V |
| |
| config SOC_INTEL_CANNONLAKE_DEBUG_CONSENT |
| int "Debug Consent for CNL" |
| # USB DBC is more common for developers so make this default to 3 if |
| # SOC_INTEL_DEBUG_CONSENT=y |
| default 3 if SOC_INTEL_DEBUG_CONSENT |
| default 0 |
| help |
| This is to control debug interface on SOC. |
| Setting non-zero value will allow to use DBC or DCI to debug SOC. |
| PlatformDebugConsent in FspmUpd.h has the details. |
| |
| config PRERAM_CBMEM_CONSOLE_SIZE |
| hex |
| default 0xe00 |
| |
| config INTEL_TXT_BIOSACM_ALIGNMENT |
| hex |
| default 0x40000 # 256KB |
| |
| endif |