| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #ifndef _SOC_CHIP_H_ |
| #define _SOC_CHIP_H_ |
| |
| #include <drivers/i2c/designware/dw_i2c.h> |
| #include <drivers/intel/gma/gma.h> |
| #include <device/pci_ids.h> |
| #include <gpio.h> |
| #include <intelblocks/cfg.h> |
| #include <intelblocks/gspi.h> |
| #include <intelblocks/power_limit.h> |
| #include <intelblocks/pcie_rp.h> |
| #include <intelblocks/tcss.h> |
| #include <soc/gpe.h> |
| #include <soc/pci_devs.h> |
| #include <soc/pmc.h> |
| #include <soc/serialio.h> |
| #include <soc/usb.h> |
| #include <soc/vr_config.h> |
| #include <stdint.h> |
| |
| /* Define config parameters for In-Band ECC (IBECC). */ |
| #define MAX_IBECC_REGIONS 8 |
| |
| /* In-Band ECC Operation Mode */ |
| enum ibecc_mode { |
| IBECC_MODE_PER_REGION, |
| IBECC_MODE_NONE, |
| IBECC_MODE_ALL |
| }; |
| |
| struct ibecc_config { |
| bool enable; |
| enum ibecc_mode mode; |
| bool range_enable[MAX_IBECC_REGIONS]; |
| uint16_t range_base[MAX_IBECC_REGIONS]; |
| uint16_t range_mask[MAX_IBECC_REGIONS]; |
| /* add ECC error injection if needed by a mainboard */ |
| }; |
| |
| /* Types of different SKUs */ |
| enum soc_intel_alderlake_power_limits { |
| ADL_P_142_242_282_15W_CORE, |
| ADL_P_282_482_28W_CORE, |
| ADL_P_682_28W_CORE, |
| ADL_P_442_482_45W_CORE, |
| ADL_P_642_682_45W_CORE, |
| ADL_M_282_12W_CORE, |
| ADL_M_282_15W_CORE, |
| ADL_M_242_CORE, |
| ADL_P_442_45W_CORE, |
| ADL_N_081_7W_CORE, |
| ADL_N_081_15W_CORE, |
| ADL_N_041_6W_CORE, |
| ADL_N_021_6W_CORE, |
| ADL_S_882_35W_CORE, |
| ADL_S_882_65W_CORE, |
| ADL_S_882_125W_CORE, |
| ADL_S_882_150W_CORE, |
| ADL_S_842_35W_CORE, |
| ADL_S_842_65W_CORE, |
| ADL_S_842_125W_CORE, |
| ADL_S_642_125W_CORE, |
| ADL_S_602_35W_CORE, |
| ADL_S_602_65W_CORE, |
| ADL_S_402_60W_CORE, |
| ADL_S_402_58W_CORE, |
| ADL_S_402_35W_CORE, |
| ADL_S_202_46W_CORE, |
| ADL_S_202_35W_CORE, |
| RPL_P_682_642_482_45W_CORE, |
| RPL_P_682_482_282_28W_CORE, |
| RPL_P_282_242_142_15W_CORE, |
| ADL_POWER_LIMITS_COUNT |
| }; |
| |
| /* TDP values for different SKUs */ |
| enum soc_intel_alderlake_cpu_tdps { |
| TDP_6W = 6, |
| TDP_7W = 7, |
| TDP_9W = 9, |
| TDP_12W = 12, |
| TDP_15W = 15, |
| TDP_28W = 28, |
| TDP_35W = 35, |
| TDP_45W = 45, |
| TDP_46W = 46, |
| TDP_58W = 58, |
| TDP_60W = 60, |
| TDP_65W = 65, |
| TDP_125W = 125, |
| TDP_150W = 150 |
| }; |
| |
| /* Mapping of different SKUs based on CPU ID and TDP values */ |
| static const struct { |
| unsigned int cpu_id; |
| enum soc_intel_alderlake_power_limits limits; |
| enum soc_intel_alderlake_cpu_tdps cpu_tdp; |
| } cpuid_to_adl[] = { |
| { PCI_DID_INTEL_ADL_P_ID_10, ADL_P_142_242_282_15W_CORE, TDP_15W }, |
| { PCI_DID_INTEL_ADL_P_ID_7, ADL_P_142_242_282_15W_CORE, TDP_15W }, |
| { PCI_DID_INTEL_ADL_P_ID_6, ADL_P_142_242_282_15W_CORE, TDP_15W }, |
| { PCI_DID_INTEL_ADL_P_ID_7, ADL_P_282_482_28W_CORE, TDP_28W }, |
| { PCI_DID_INTEL_ADL_P_ID_5, ADL_P_282_482_28W_CORE, TDP_28W }, |
| { PCI_DID_INTEL_ADL_P_ID_3, ADL_P_682_28W_CORE, TDP_28W }, |
| { PCI_DID_INTEL_ADL_P_ID_5, ADL_P_442_482_45W_CORE, TDP_45W }, |
| { PCI_DID_INTEL_ADL_P_ID_4, ADL_P_642_682_45W_CORE, TDP_45W }, |
| { PCI_DID_INTEL_ADL_P_ID_3, ADL_P_642_682_45W_CORE, TDP_45W }, |
| { PCI_DID_INTEL_ADL_P_ID_1, ADL_P_442_482_45W_CORE, TDP_45W }, |
| { PCI_DID_INTEL_ADL_M_ID_1, ADL_M_282_12W_CORE, TDP_12W }, |
| { PCI_DID_INTEL_ADL_M_ID_1, ADL_M_282_15W_CORE, TDP_15W }, |
| { PCI_DID_INTEL_ADL_M_ID_2, ADL_M_242_CORE, TDP_9W }, |
| { PCI_DID_INTEL_ADL_N_ID_1, ADL_N_081_7W_CORE, TDP_7W }, |
| { PCI_DID_INTEL_ADL_N_ID_1, ADL_N_081_15W_CORE, TDP_15W }, |
| { PCI_DID_INTEL_ADL_N_ID_2, ADL_N_041_6W_CORE, TDP_6W }, |
| { PCI_DID_INTEL_ADL_N_ID_3, ADL_N_041_6W_CORE, TDP_6W }, |
| { PCI_DID_INTEL_ADL_N_ID_4, ADL_N_021_6W_CORE, TDP_6W }, |
| { PCI_DID_INTEL_ADL_S_ID_1, ADL_S_882_35W_CORE, TDP_35W }, |
| { PCI_DID_INTEL_ADL_S_ID_1, ADL_S_882_65W_CORE, TDP_65W }, |
| { PCI_DID_INTEL_ADL_S_ID_1, ADL_S_882_125W_CORE, TDP_125W }, |
| { PCI_DID_INTEL_ADL_S_ID_1, ADL_S_882_150W_CORE, TDP_150W }, |
| { PCI_DID_INTEL_ADL_S_ID_3, ADL_S_842_35W_CORE, TDP_35W }, |
| { PCI_DID_INTEL_ADL_S_ID_3, ADL_S_842_65W_CORE, TDP_65W }, |
| { PCI_DID_INTEL_ADL_S_ID_3, ADL_S_842_125W_CORE, TDP_125W }, |
| { PCI_DID_INTEL_ADL_S_ID_8, ADL_S_642_125W_CORE, TDP_125W }, |
| { PCI_DID_INTEL_ADL_S_ID_10, ADL_S_602_35W_CORE, TDP_35W }, |
| { PCI_DID_INTEL_ADL_S_ID_10, ADL_S_602_65W_CORE, TDP_65W }, |
| { PCI_DID_INTEL_ADL_S_ID_11, ADL_S_402_35W_CORE, TDP_35W }, |
| { PCI_DID_INTEL_ADL_S_ID_11, ADL_S_402_58W_CORE, TDP_58W }, |
| { PCI_DID_INTEL_ADL_S_ID_11, ADL_S_402_60W_CORE, TDP_60W }, |
| { PCI_DID_INTEL_ADL_S_ID_12, ADL_S_202_35W_CORE, TDP_35W }, |
| { PCI_DID_INTEL_ADL_S_ID_12, ADL_S_202_46W_CORE, TDP_46W }, |
| { PCI_DID_INTEL_RPL_P_ID_1, RPL_P_682_642_482_45W_CORE, TDP_45W }, |
| { PCI_DID_INTEL_RPL_P_ID_2, RPL_P_682_482_282_28W_CORE, TDP_28W }, |
| { PCI_DID_INTEL_RPL_P_ID_3, RPL_P_282_242_142_15W_CORE, TDP_15W }, |
| { PCI_DID_INTEL_RPL_P_ID_4, RPL_P_282_242_142_15W_CORE, TDP_15W }, |
| { PCI_DID_INTEL_RPL_P_ID_5, RPL_P_282_242_142_15W_CORE, TDP_15W }, |
| }; |
| |
| /* Types of display ports */ |
| enum ddi_ports { |
| DDI_PORT_A, |
| DDI_PORT_B, |
| DDI_PORT_C, |
| DDI_PORT_1, |
| DDI_PORT_2, |
| DDI_PORT_3, |
| DDI_PORT_4, |
| DDI_PORT_COUNT, |
| }; |
| |
| enum ddi_port_flags { |
| DDI_ENABLE_DDC = 1 << 0, |
| DDI_ENABLE_HPD = 1 << 1, |
| }; |
| |
| /* |
| * Enable External V1P05/Vnn/VnnSx Rail in: BIT0:S0i1/S0i2, |
| * BIT1:S0i3, BIT2:S3, BIT3:S4, BIT4:S5, BIT5:S0. |
| */ |
| enum fivr_enable_states { |
| FIVR_ENABLE_S0i1_S0i2 = BIT(0), |
| FIVR_ENABLE_S0i3 = BIT(1), |
| FIVR_ENABLE_S3 = BIT(2), |
| FIVR_ENABLE_S4 = BIT(3), |
| FIVR_ENABLE_S5 = BIT(4), |
| FIVR_ENABLE_S0 = BIT(5), |
| }; |
| |
| /* |
| * Enable the following for External V1p05 rail |
| * BIT0: Retention active switch support |
| * BIT1: Normal Active voltage supported |
| * BIT2: Minimum active voltage supported |
| * BIT3: Minimum Retention voltage supported |
| */ |
| enum fivr_voltage_supported { |
| FIVR_RET_ACTIVE_SWITCH_SUPPORT = BIT(0), |
| FIVR_VOLTAGE_NORMAL = BIT(1), |
| FIVR_VOLTAGE_MIN_ACTIVE = BIT(2), |
| FIVR_VOLTAGE_MIN_RETENTION = BIT(3), |
| }; |
| |
| #define FIVR_ENABLE_ALL_SX (FIVR_ENABLE_S0i1_S0i2 | FIVR_ENABLE_S0i3 | \ |
| FIVR_ENABLE_S3 | FIVR_ENABLE_S4 | FIVR_ENABLE_S5 | FIVR_ENABLE_S0) |
| /* |
| * The Max Pkg Cstate |
| * Values 0 - C0/C1, 1 - C2, 2 - C3, 3 - C6, 4 - C7, 5 - C7S, 6 - C8, 7 - C9, 8 - C10, |
| * 254 - CPU Default , 255 - Auto. |
| */ |
| enum pkgcstate_limit { |
| LIMIT_C0_C1 = 0, |
| LIMIT_C2 = 1, |
| LIMIT_C3 = 2, |
| LIMIT_C6 = 3, |
| LIMIT_C7 = 4, |
| LIMIT_C7S = 5, |
| LIMIT_C8 = 6, |
| LIMIT_C9 = 7, |
| LIMIT_C10 = 8, |
| LIMIT_CPUDEFAULT = 254, |
| LIMIT_AUTO = 255, |
| }; |
| |
| /* Bit values for use in LpmStateEnableMask. */ |
| enum lpm_state_mask { |
| LPM_S0i2_0 = BIT(0), |
| LPM_S0i2_1 = BIT(1), |
| LPM_S0i2_2 = BIT(2), |
| LPM_S0i3_0 = BIT(3), |
| LPM_S0i3_1 = BIT(4), |
| LPM_S0i3_2 = BIT(5), |
| LPM_S0i3_3 = BIT(6), |
| LPM_S0i3_4 = BIT(7), |
| LPM_S0iX_ALL = LPM_S0i2_0 | LPM_S0i2_1 | LPM_S0i2_2 |
| | LPM_S0i3_0 | LPM_S0i3_1 | LPM_S0i3_2 | LPM_S0i3_3 | LPM_S0i3_4, |
| }; |
| |
| /* |
| * FivrSpreadSpectrum: |
| * Values |
| * 0 - 0.5%, 3 - 1%, 8 - 1.5%, 18 - 2%, 28 - 3%, 34 - 4%, 39 - 5%, 44 - 6% |
| */ |
| enum fivr_spread_spectrum_ratio { |
| FIVR_SS_0_5 = 0, |
| FIVR_SS_1 = 3, |
| FIVR_SS_1_5 = 8, |
| FIVR_SS_2 = 18, |
| FIVR_SS_3 = 28, |
| FIVR_SS_4 = 34, |
| FIVR_SS_5 = 39, |
| FIVR_SS_6 = 44, |
| }; |
| |
| /* |
| * Slew Rate configuration for Deep Package C States for VR domain. |
| * They are fast time divided by 2. |
| * 0 - Fast/2 |
| * 1 - Fast/4 |
| * 2 - Fast/8 |
| * 3 - Fast/16 |
| */ |
| enum slew_rate { |
| SLEW_FAST_2, |
| SLEW_FAST_4, |
| SLEW_FAST_8, |
| SLEW_FAST_16 |
| }; |
| |
| struct soc_intel_alderlake_config { |
| |
| /* Common struct containing soc config data required by common code */ |
| struct soc_intel_common_config common_soc_config; |
| |
| /* Common struct containing power limits configuration information */ |
| struct soc_power_limits_config power_limits_config[ADL_POWER_LIMITS_COUNT]; |
| |
| /* Gpio group routed to each dword of the GPE0 block. Values are |
| * of the form PMC_GPP_[A:U] or GPD. */ |
| uint8_t pmc_gpe0_dw0; /* GPE0_31_0 STS/EN */ |
| uint8_t pmc_gpe0_dw1; /* GPE0_63_32 STS/EN */ |
| uint8_t pmc_gpe0_dw2; /* GPE0_95_64 STS/EN */ |
| |
| /* Generic IO decode ranges */ |
| uint32_t gen1_dec; |
| uint32_t gen2_dec; |
| uint32_t gen3_dec; |
| uint32_t gen4_dec; |
| |
| /* Enable S0iX support */ |
| int s0ix_enable; |
| /* Support for TCSS xhci, xdci, TBT PCIe root ports and DMA controllers */ |
| uint8_t tcss_d3_hot_disable; |
| /* Support for TBT PCIe root ports and DMA controllers with D3Hot->D3Cold */ |
| uint8_t tcss_d3_cold_disable; |
| /* Enable DPTF support */ |
| int dptf_enable; |
| |
| /* Deep SX enable for both AC and DC */ |
| int deep_s3_enable_ac; |
| int deep_s3_enable_dc; |
| int deep_s5_enable_ac; |
| int deep_s5_enable_dc; |
| |
| /* Deep Sx Configuration |
| * DSX_EN_WAKE_PIN - Enable WAKE# pin |
| * DSX_EN_LAN_WAKE_PIN - Enable LAN_WAKE# pin |
| * DSX_DIS_AC_PRESENT_PD - Disable pull-down on AC_PRESENT pin */ |
| uint32_t deep_sx_config; |
| |
| /* TCC activation offset */ |
| uint32_t tcc_offset; |
| |
| /* In-Band ECC (IBECC) configuration */ |
| struct ibecc_config ibecc; |
| |
| /* System Agent dynamic frequency support. Only effects ULX/ULT CPUs. |
| * When enabled memory will be training at two different frequencies. |
| * 0:Disabled, 1:FixedPoint0, 2:FixedPoint1, 3:FixedPoint2, |
| * 4:FixedPoint3, 5:Enabled */ |
| enum { |
| SaGv_Disabled, |
| SaGv_FixedPoint0, |
| SaGv_FixedPoint1, |
| SaGv_FixedPoint2, |
| SaGv_FixedPoint3, |
| SaGv_Enabled, |
| } sagv; |
| |
| /* Rank Margin Tool. 1:Enable, 0:Disable */ |
| uint8_t RMT; |
| |
| /* USB related */ |
| struct usb2_port_config usb2_ports[16]; |
| struct usb3_port_config usb3_ports[10]; |
| /* Wake Enable Bitmap for USB2 ports */ |
| uint16_t usb2_wake_enable_bitmap; |
| /* Wake Enable Bitmap for USB3 ports */ |
| uint16_t usb3_wake_enable_bitmap; |
| /* Program OC pins for TCSS */ |
| struct tcss_port_config tcss_ports[MAX_TYPE_C_PORTS]; |
| |
| /* SATA related */ |
| uint8_t sata_mode; |
| uint8_t sata_salp_support; |
| uint8_t sata_ports_enable[8]; |
| uint8_t sata_ports_dev_slp[8]; |
| |
| /* |
| * Enable(0)/Disable(1) SATA Power Optimizer on PCH side. |
| * Default 0. Setting this to 1 disables the SATA Power Optimizer. |
| */ |
| uint8_t sata_pwr_optimize_disable; |
| |
| /* |
| * SATA Port Enable Dito Config. |
| * Enable DEVSLP Idle Timeout settings (DmVal, DitoVal). |
| */ |
| uint8_t sata_ports_enable_dito_config[8]; |
| |
| /* SataPortsDmVal is the DITO multiplier. Default is 15. */ |
| uint8_t sata_ports_dm_val[8]; |
| |
| /* SataPortsDitoVal is the DEVSLP Idle Timeout, default is 625ms */ |
| uint16_t sata_ports_dito_val[8]; |
| |
| /* Audio related */ |
| uint8_t pch_hda_dsp_enable; |
| |
| /* iDisp-Link T-Mode 0: 2T, 2: 4T, 3: 8T, 4: 16T */ |
| enum { |
| HDA_TMODE_2T = 0, |
| HDA_TMODE_4T = 2, |
| HDA_TMODE_8T = 3, |
| HDA_TMODE_16T = 4, |
| } pch_hda_idisp_link_tmode; |
| |
| /* iDisp-Link Freq 4: 96MHz, 3: 48MHz. */ |
| enum { |
| HDA_LINKFREQ_48MHZ = 3, |
| HDA_LINKFREQ_96MHZ = 4, |
| } pch_hda_idisp_link_frequency; |
| |
| bool pch_hda_idisp_codec_enable; |
| |
| struct pcie_rp_config pch_pcie_rp[CONFIG_MAX_PCH_ROOT_PORTS]; |
| struct pcie_rp_config cpu_pcie_rp[CONFIG_MAX_CPU_ROOT_PORTS]; |
| uint8_t pcie_clk_config_flag[CONFIG_MAX_PCIE_CLOCK_SRC]; |
| |
| /* Gfx related */ |
| enum { |
| IGD_SM_0MB = 0x00, |
| IGD_SM_32MB = 0x01, |
| IGD_SM_64MB = 0x02, |
| IGD_SM_96MB = 0x03, |
| IGD_SM_128MB = 0x04, |
| IGD_SM_160MB = 0x05, |
| IGD_SM_4MB = 0xF0, |
| IGD_SM_8MB = 0xF1, |
| IGD_SM_12MB = 0xF2, |
| IGD_SM_16MB = 0xF3, |
| IGD_SM_20MB = 0xF4, |
| IGD_SM_24MB = 0xF5, |
| IGD_SM_28MB = 0xF6, |
| IGD_SM_36MB = 0xF8, |
| IGD_SM_40MB = 0xF9, |
| IGD_SM_44MB = 0xFA, |
| IGD_SM_48MB = 0xFB, |
| IGD_SM_52MB = 0xFC, |
| IGD_SM_56MB = 0xFD, |
| IGD_SM_60MB = 0xFE, |
| } igd_dvmt50_pre_alloc; |
| uint8_t skip_ext_gfx_scan; |
| |
| /* Enable/Disable EIST. 1b:Enabled, 0b:Disabled */ |
| uint8_t eist_enable; |
| |
| /* Enable C6 DRAM */ |
| uint8_t enable_c6dram; |
| |
| /* |
| * SerialIO device mode selection: |
| * PchSerialIoDisabled, |
| * PchSerialIoPci, |
| * PchSerialIoHidden, |
| * PchSerialIoLegacyUart, |
| * PchSerialIoSkipInit |
| */ |
| uint8_t serial_io_i2c_mode[CONFIG_SOC_INTEL_I2C_DEV_MAX]; |
| uint8_t serial_io_gspi_mode[CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX]; |
| uint8_t serial_io_uart_mode[CONFIG_SOC_INTEL_UART_DEV_MAX]; |
| /* |
| * GSPIn Default Chip Select Mode: |
| * 0:Hardware Mode, |
| * 1:Software Mode |
| */ |
| uint8_t serial_io_gspi_cs_mode[CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX]; |
| /* |
| * GSPIn Default Chip Select State: |
| * 0: Low, |
| * 1: High |
| */ |
| uint8_t serial_io_gspi_cs_state[CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX]; |
| |
| /* Enable Pch iSCLK */ |
| uint8_t pch_isclk; |
| |
| /* CNVi BT Core Enable/Disable */ |
| bool cnvi_bt_core; |
| |
| /* CNVi BT Audio Offload: Enable/Disable BT Audio Offload. */ |
| bool cnvi_bt_audio_offload; |
| |
| /* |
| * These GPIOs will be programmed by the IOM to handle biasing of the |
| * Type-C aux (SBU) signals when certain alternate modes are used. |
| * `pad_auxn_dc` should be assigned to the GPIO pad providing negative |
| * bias (name usually contains `AUXN_DC` or `AUX_N`); similarly, |
| * `pad_auxp_dc` should be assigned to the GPIO providing positive bias |
| * (name often contains `AUXP_DC` or `_AUX_P`). |
| */ |
| struct typec_aux_bias_pads typec_aux_bias_pads[MAX_TYPE_C_PORTS]; |
| |
| /* |
| * SOC Aux orientation override: |
| * This is a bitfield that corresponds to up to 4 TCSS ports on ADL. |
| * Even numbered bits (0, 2, 4, 6) control the retimer being handled by SOC. |
| * Odd numbered bits (1, 3, 5, 7) control the orientation of the physical aux lines |
| * on the motherboard. |
| */ |
| uint16_t tcss_aux_ori; |
| |
| /* |
| * Override GPIO PM configuration: |
| * 0: Use FSP default GPIO PM program, |
| * 1: coreboot to override GPIO PM program |
| */ |
| uint8_t gpio_override_pm; |
| |
| /* |
| * GPIO PM configuration: 0 to disable, 1 to enable power gating |
| * Bit 6-7: Reserved |
| * Bit 5: MISCCFG_GPSIDEDPCGEN |
| * Bit 4: MISCCFG_GPRCOMPCDLCGEN |
| * Bit 3: MISCCFG_GPRTCDLCGEN |
| * Bit 2: MISCCFG_GSXLCGEN |
| * Bit 1: MISCCFG_GPDPCGEN |
| * Bit 0: MISCCFG_GPDLCGEN |
| */ |
| uint8_t gpio_pm[TOTAL_GPIO_COMM]; |
| |
| /* DP config */ |
| /* |
| * Port config |
| * 0:Disabled, 1:eDP, 2:MIPI DSI |
| */ |
| uint8_t ddi_portA_config; |
| uint8_t ddi_portB_config; |
| |
| /* Enable(1)/Disable(0) HPD/DDC */ |
| uint8_t ddi_ports_config[DDI_PORT_COUNT]; |
| |
| /* Hybrid storage mode enable (1) / disable (0) |
| * This mode makes FSP detect Optane and NVME and set PCIe lane mode |
| * accordingly */ |
| uint8_t hybrid_storage_mode; |
| |
| #if CONFIG(SOC_INTEL_ALDERLAKE_PCH_N) |
| /* eMMC HS400 mode */ |
| uint8_t emmc_enable_hs400_mode; |
| #endif |
| |
| /* |
| * Override CPU flex ratio value: |
| * CPU ratio value controls the maximum processor non-turbo ratio. |
| * Valid Range 0 to 63. |
| * |
| * In general descriptor provides option to set default cpu flex ratio. |
| * Default cpu flex ratio is 0 ensures booting with non-turbo max frequency. |
| * That's the reason FSP skips cpu_ratio override if cpu_ratio is 0. |
| * |
| * Only override CPU flex ratio if don't want to boot with non-turbo max. |
| */ |
| uint8_t cpu_ratio_override; |
| |
| /* |
| * Enable(0)/Disable(1) DMI Power Optimizer on PCH side. |
| * Default 0. Setting this to 1 disables the DMI Power Optimizer. |
| */ |
| uint8_t dmi_power_optimize_disable; |
| |
| /* |
| * Used to communicate the power delivery design capability of the board. This |
| * value is an enum of the available power delivery segments that are defined in |
| * the Platform Design Guide. |
| */ |
| uint8_t vr_power_delivery_design; |
| |
| /* |
| * Enable(1)/Disable(0) CPU Replacement check. |
| * Default 0. Setting this to 1 to check CPU replacement. |
| */ |
| uint8_t cpu_replacement_check; |
| |
| /* ISA Serial Base selection. */ |
| enum { |
| ISA_SERIAL_BASE_ADDR_3F8, |
| ISA_SERIAL_BASE_ADDR_2F8, |
| } isa_serial_uart_base; |
| |
| /* structure containing various settings for PCH FIVRs */ |
| struct { |
| bool configure_ext_fivr; |
| enum fivr_enable_states v1p05_enable_bitmap; |
| enum fivr_enable_states vnn_enable_bitmap; |
| enum fivr_enable_states vnn_sx_enable_bitmap; |
| enum fivr_voltage_supported v1p05_supported_voltage_bitmap; |
| enum fivr_voltage_supported vnn_supported_voltage_bitmap; |
| /* V1p05 Rail Voltage in mv */ |
| int v1p05_voltage_mv; |
| /* Vnn Rail Voltage in mv */ |
| int vnn_voltage_mv; |
| /* VnnSx Rail Voltage in mv */ |
| int vnn_sx_voltage_mv; |
| /* External Icc Max for V1p05 rail in mA */ |
| int v1p05_icc_max_ma; |
| /* External Icc Max for VnnSx rail in mA */ |
| int vnn_icc_max_ma; |
| } ext_fivr_settings; |
| |
| /* VrConfig Settings. |
| * 0 = VR_DOMAIN_IA Core 1 = VR_DOMAIN_GT. |
| */ |
| struct vr_config domain_vr_config[NUM_VR_DOMAINS]; |
| |
| uint16_t max_dram_speed_mts; |
| |
| enum { |
| SLP_S3_ASSERTION_DEFAULT, |
| SLP_S3_ASSERTION_60_US, |
| SLP_S3_ASSERTION_1_MS, |
| SLP_S3_ASSERTION_50_MS, |
| SLP_S3_ASSERTION_2_S, |
| } pch_slp_s3_min_assertion_width; |
| |
| enum { |
| SLP_S4_ASSERTION_DEFAULT, |
| SLP_S4_ASSERTION_1S, |
| SLP_S4_ASSERTION_2S, |
| SLP_S4_ASSERTION_3S, |
| SLP_S4_ASSERTION_4S, |
| } pch_slp_s4_min_assertion_width; |
| |
| enum { |
| SLP_SUS_ASSERTION_DEFAULT, |
| SLP_SUS_ASSERTION_0_MS, |
| SLP_SUS_ASSERTION_500_MS, |
| SLP_SUS_ASSERTION_1_S, |
| SLP_SUS_ASSERTION_4_S, |
| } pch_slp_sus_min_assertion_width; |
| |
| enum { |
| SLP_A_ASSERTION_DEFAULT, |
| SLP_A_ASSERTION_0_MS, |
| SLP_A_ASSERTION_4_S, |
| SLP_A_ASSERTION_98_MS, |
| SLP_A_ASSERTION_2_S, |
| } pch_slp_a_min_assertion_width; |
| |
| /* |
| * PCH PM Reset Power Cycle Duration |
| * NOTE: Duration programmed in the PchPmPwrCycDur should never be smaller than the |
| * stretch duration programmed in the following registers: |
| * - GEN_PMCON_A.SLP_S3_MIN_ASST_WDTH (PchPmSlpS3MinAssert) |
| * - GEN_PMCON_A.S4MAW (PchPmSlpS4MinAssert) |
| * - PM_CFG.SLP_A_MIN_ASST_WDTH (PchPmSlpAMinAssert) |
| * - PM_CFG.SLP_LAN_MIN_ASST_WDTH |
| */ |
| enum { |
| POWER_CYCLE_DURATION_DEFAULT, |
| POWER_CYCLE_DURATION_1S, |
| POWER_CYCLE_DURATION_2S, |
| POWER_CYCLE_DURATION_3S, |
| POWER_CYCLE_DURATION_4S, |
| } pch_reset_power_cycle_duration; |
| |
| /* Platform Power Pmax */ |
| uint16_t platform_pmax; |
| /* |
| * FivrRfiFrequency |
| * PCODE MMIO Mailbox: Set the desired RFI frequency, in increments of 100KHz. |
| * 0: Auto |
| * Range varies based on XTAL clock: |
| * 0-1918*100 KHz (Up to 191.8MHz) for 24MHz clock |
| * 0-1535*100 KHz (Up to 153.5MHz) for 19MHz clock |
| */ |
| uint32_t fivr_rfi_frequency; |
| /* |
| * FivrSpreadSpectrum |
| * Set the Spread Spectrum Range. |
| * Range: 0.5%, 1%, 1.5%, 2%, 3%, 4%, 5%, 6%. |
| * Each Range is translated to an encoded value for FIVR register. |
| * 0.5% = 0, 1% = 3, 1.5% = 8, 2% = 18, 3% = 28, 4% = 34, 5% = 39, 6% = 44. |
| */ |
| uint8_t fivr_spread_spectrum; |
| /* Enable or Disable Acoustic Noise Mitigation feature */ |
| uint8_t acoustic_noise_mitigation; |
| /* |
| * Acoustic Noise Mitigation Range. Defines the maximum Pre-Wake |
| * randomization time in micro ticks. This can be programmed only |
| * if AcousticNoiseMitigation is enabled. |
| * Range 0-255 |
| */ |
| uint8_t PreWake; |
| /* Disable Fast Slew Rate for Deep Package C States for VR domains */ |
| uint8_t fast_pkg_c_ramp_disable[NUM_VR_DOMAINS]; |
| /* |
| * Slew Rate configuration for Deep Package C States for VR domains |
| * 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16; see enum slew_rate for values |
| */ |
| uint8_t slow_slew_rate[NUM_VR_DOMAINS]; |
| |
| /* Energy-Performance Preference (HWP feature) */ |
| bool enable_energy_perf_pref; |
| uint8_t energy_perf_pref_value; |
| |
| /* |
| * Enable or Disable C1 Cstate Demotion. |
| * Default 0. Set this to 1 in order to disable C state demotion. |
| */ |
| bool disable_c1_state_auto_demotion; |
| |
| /* |
| * Enable or Disable PCH USB2 Phy power gating. |
| * Default 0. Set this to 1 in order to disable PCH USB2 Phy Power gating. |
| * Workaround for Intel TA# 723158 to prevent possible display flicker. |
| */ |
| bool usb2_phy_sus_pg_disable; |
| |
| /* |
| * Enable or Disable Package C-state Demotion. |
| * Default is set to 0. |
| * Set this to 1 in order to disable Package C-state demotion. |
| */ |
| bool disable_package_c_state_demotion; |
| |
| /* |
| * Enable or Disable Skipping MBP HOB. |
| * Default is set to 0 and set to 1 to skip the MBP HOB. |
| */ |
| bool skip_mbp_hob; |
| |
| /* i915 struct for GMA backlight control */ |
| struct i915_gpu_controller_info gfx; |
| |
| /* |
| * IGD panel configuration |
| */ |
| struct i915_gpu_panel_config panel_cfg; |
| }; |
| |
| typedef struct soc_intel_alderlake_config config_t; |
| |
| #endif |