| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <stdint.h> |
| #include <arch/bootblock.h> |
| #include <cpu/x86/msr.h> |
| #include <arch/io.h> |
| #include <delay.h> |
| #include <halt.h> |
| |
| #include "haswell.h" |
| |
| #include <southbridge/intel/lynxpoint/pch.h> |
| |
| static void set_flex_ratio_to_tdp_nominal(void) |
| { |
| msr_t flex_ratio, msr; |
| u32 soft_reset; |
| u8 nominal_ratio; |
| |
| /* Check for Flex Ratio support */ |
| flex_ratio = rdmsr(MSR_FLEX_RATIO); |
| if (!(flex_ratio.lo & FLEX_RATIO_EN)) |
| return; |
| |
| /* Check for >0 configurable TDPs */ |
| msr = rdmsr(MSR_PLATFORM_INFO); |
| if (((msr.hi >> 1) & 3) == 0) |
| return; |
| |
| /* Use nominal TDP ratio for flex ratio */ |
| msr = rdmsr(MSR_CONFIG_TDP_NOMINAL); |
| nominal_ratio = msr.lo & 0xff; |
| |
| /* See if flex ratio is already set to nominal TDP ratio */ |
| if (((flex_ratio.lo >> 8) & 0xff) == nominal_ratio) |
| return; |
| |
| /* Set flex ratio to nominal TDP ratio */ |
| flex_ratio.lo &= ~0xff00; |
| flex_ratio.lo |= nominal_ratio << 8; |
| flex_ratio.lo |= FLEX_RATIO_LOCK; |
| wrmsr(MSR_FLEX_RATIO, flex_ratio); |
| |
| /* Set flex ratio in soft reset data register bits 11:6. |
| * RCBA region is enabled in southbridge bootblock */ |
| soft_reset = RCBA32(SOFT_RESET_DATA); |
| soft_reset &= ~(0x3f << 6); |
| soft_reset |= (nominal_ratio & 0x3f) << 6; |
| RCBA32(SOFT_RESET_DATA) = soft_reset; |
| |
| /* Set soft reset control to use register value */ |
| RCBA32_OR(SOFT_RESET_CTRL, 1); |
| |
| /* Delay before reset to avoid potential TPM lockout */ |
| if (CONFIG(TPM1) || CONFIG(TPM2)) |
| mdelay(30); |
| |
| /* Issue warm reset, will be "CPU only" due to soft reset data */ |
| outb(0x0, 0xcf9); |
| outb(0x6, 0xcf9); |
| halt(); |
| } |
| |
| void bootblock_early_cpu_init(void) |
| { |
| /* Set flex ratio and reset if needed */ |
| set_flex_ratio_to_tdp_nominal(); |
| } |