blob: a274a67749402218090a2c1bfb3a882fd103ea8d [file] [log] [blame]
chip northbridge/intel/sandybridge
# IGD Displays
register "gfx" = "GMA_STATIC_DISPLAYS(1)"
# Enable DisplayPort Hotplug with 6ms pulse
register "gpu_dp_d_hotplug" = "0x06"
# Enable Panel as LVDS and configure power delays
register "gpu_panel_port_select" = "PANEL_PORT_LVDS"
register "gpu_panel_power_cycle_delay" = "6" # T7: 500ms
register "gpu_panel_power_up_delay" = "100" # T1+T2: 10ms
register "gpu_panel_power_down_delay" = "100" # T5+T6: 10ms
register "gpu_panel_power_backlight_on_delay" = "2000" # T3: 200ms
register "gpu_panel_power_backlight_off_delay" = "2000" # T4: 200ms
register "gpu_cpu_backlight" = "0x1155"
register "gpu_pch_backlight" = "0x11551155"
device domain 0 on
subsystemid 0x17aa 0x21f6 inherit
device pci 00.0 on end # Host bridge
device pci 01.0 on end # PCIe bridge for discrete graphics
device pci 02.0 on end # Internal graphics VGA controller
chip southbridge/intel/bd82x6x # Intel Series 7 Panther Point PCH
# GPI routing
# 0 No effect (default)
# 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
# 2 SCI (if corresponding GPIO_EN bit is also set)
register "alt_gp_smi_en" = "0x0000"
register "gpi1_routing" = "2"
register "gpi13_routing" = "2"
register "sata_port_map" = "0x3f"
# Set max SATA speed to 6.0 Gb/s
register "sata_interface_speed_support" = "0x3"
register "gen1_dec" = "0x7c1601"
register "gen2_dec" = "0x0c15e1"
register "gen4_dec" = "0x0c06a1"
# Enable zero-based linear PCIe root port functions
register "pcie_port_coalesce" = "true"
register "pcie_hotplug_map" = "{ 0, 0, 1, 0, 0, 0, 0, 0 }"
register "xhci_switchable_ports" = "0xf"
register "superspeed_capable_ports" = "0xf"
register "xhci_overcurrent_mapping" = "0x04000201"
register "docking_supported" = "1"
register "spi_uvscc" = "0x2005"
register "spi_lvscc" = "0x2005"
device pci 14.0 on end # USB 3.0 Controller
device pci 16.0 on end # Management Engine Interface 1
device pci 16.1 off end # Management Engine Interface 2
device pci 16.2 off end # Management Engine IDE-R
device pci 16.3 off end # Management Engine KT
device pci 19.0 on # Intel Gigabit Ethernet
subsystemid 0x17aa 0x21f3
end
device pci 1a.0 on end # USB2 EHCI #2
device pci 1b.0 on end # High Definition Audio
device pci 1c.0 on end # PCIe Port #1
device pci 1c.1 on end # PCIe Port #2
device pci 1c.2 on # PCIe Port #3
smbios_slot_desc "7" "3" "ExpressCard Slot" "8"
end
device pci 1c.3 off end # PCIe Port #4
device pci 1c.4 off end # PCIe Port #5
device pci 1c.5 off end # PCIe Port #6
device pci 1c.6 off end # PCIe Port #7
device pci 1c.7 off end # PCIe Port #8
device pci 1d.0 on end # USB2 EHCI #1
device pci 1e.0 off end # PCI bridge
device pci 1f.0 on # PCI-LPC bridge
chip ec/lenovo/pmh7
device pnp ff.1 on end # dummy
register "backlight_enable" = "0x01"
register "dock_event_enable" = "0x01"
end
chip drivers/pc80/tpm
device pnp 0c31.0 on end
end
chip ec/lenovo/h8
device pnp ff.2 on # dummy
io 0x60 = 0x62
io 0x62 = 0x66
io 0x64 = 0x1600
io 0x66 = 0x1604
end
register "config0" = "0xa7"
register "config1" = "0x09"
register "config2" = "0xa0"
register "config3" = "0xc2"
register "has_keyboard_backlight" = "1"
register "beepmask0" = "0x00"
register "beepmask1" = "0x86"
register "has_power_management_beeps" = "0"
register "event2_enable" = "0xff"
register "event3_enable" = "0xff"
register "event4_enable" = "0xd0"
register "event5_enable" = "0xfc"
register "event6_enable" = "0x00"
register "event7_enable" = "0x01"
register "event8_enable" = "0x7b"
register "event9_enable" = "0xff"
register "eventa_enable" = "0x01"
register "eventb_enable" = "0x00"
register "eventc_enable" = "0xff"
register "eventd_enable" = "0xff"
register "evente_enable" = "0x0d"
register "has_bdc_detection" = "1"
register "bdc_gpio_num" = "54"
register "bdc_gpio_lvl" = "0"
end
chip drivers/lenovo/hybrid_graphics
device pnp ff.f on end # dummy
register "detect_gpio" = "21"
register "has_panel_hybrid_gpio" = "1"
register "panel_hybrid_gpio" = "52"
register "panel_integrated_lvl" = "1"
register "has_backlight_gpio" = "0"
register "has_dgpu_power_gpio" = "0"
register "has_thinker1" = "1"
end
end
device pci 1f.2 on end # SATA Controller 1
device pci 1f.3 on # SMBus
# eeprom, 8 virtual devices, same chip
chip drivers/i2c/at24rf08c
device i2c 54 on end
device i2c 55 on end
device i2c 56 on end
device i2c 57 on end
device i2c 5c on end
device i2c 5d on end
device i2c 5e on end
device i2c 5f on end
end
end
device pci 1f.5 off end # SATA Controller 2
device pci 1f.6 on end # Thermal
end
end
end