| chip northbridge/intel/sandybridge |
| |
| register "gpu_dp_b_hotplug" = "0x04" |
| register "gpu_dp_c_hotplug" = "0x04" |
| register "gpu_dp_d_hotplug" = "0x04" |
| register "gpu_panel_power_cycle_delay" = "3" |
| register "gpu_panel_power_up_delay" = "250" # T1+T2: 25ms |
| register "gpu_panel_power_down_delay" = "250" # T5+T6: 35ms |
| register "gpu_panel_power_backlight_on_delay" = "2500" # T3: 250ms |
| register "gpu_panel_power_backlight_off_delay" = "2500" # T4: 250ms |
| |
| register "gpu_cpu_backlight" = "0x1312" |
| register "gpu_pch_backlight" = "0x13121312" |
| |
| device domain 0 on |
| device pci 00.0 on |
| subsystemid 0x17aa 0x21e8 |
| end # host bridge |
| device pci 02.0 on |
| subsystemid 0x17aa 0x21e8 |
| end # vga controller |
| |
| chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH |
| # Enable SATA ports 0 (HDD bay) & 2 (msata) & 3 (esatap) |
| register "sata_port_map" = "0x1d" |
| # X1 does not have ExpressCard slot |
| register "pcie_hotplug_map" = "{ 0, 0, 0, 0, 0, 0, 0, 0 }" |
| |
| device pci 1a.0 on |
| subsystemid 0x17aa 0x21e8 |
| end # USB2 EHCI #2 |
| device pci 1b.0 on |
| subsystemid 0x17aa 0x21e8 |
| end # High Definition Audio |
| device pci 1c.0 off end # PCIe Port #1 |
| device pci 1c.1 on |
| subsystemid 0x17aa 0x21e8 |
| end # PCIe Port #2 (wlan) |
| device pci 1c.2 off end # PCIe Port #3 |
| device pci 1c.3 off end # PCIe Port #4 |
| device pci 1c.4 on |
| subsystemid 0x17aa 0x21e8 |
| chip drivers/ricoh/rce822 # Ricoh cardreader |
| device pci 00.0 on |
| subsystemid 0x17aa 0x21e8 |
| end |
| end |
| end # PCIe Port #5 (SD) |
| device pci 1c.5 off end # PCIe Port #6 |
| device pci 1c.6 on |
| subsystemid 0x17aa 0x21e8 |
| end # PCIe Port #7 |
| device pci 1c.7 off end # PCIe Port #8 |
| device pci 1d.0 on |
| subsystemid 0x17aa 0x21e8 |
| end # USB2 EHCI #1 |
| device pci 1e.0 off end # PCI bridge |
| device pci 1f.0 on #LPC bridge |
| subsystemid 0x17aa 0x21e8 |
| chip ec/lenovo/h8 |
| register "config2" = "0xe0" |
| register "config3" = "0xc0" |
| |
| register "beepmask0" = "0xfe" |
| register "beepmask1" = "0x96" |
| |
| register "event5_enable" = "0x3c" |
| register "evente_enable" = "0x3d" |
| |
| # BDC detection is broken on this board: |
| register "has_bdc_detection" = "0" |
| end |
| end # LPC bridge |
| device pci 1f.2 on |
| subsystemid 0x17aa 0x21e8 |
| end # SATA Controller 1 |
| device pci 1f.3 on |
| subsystemid 0x17aa 0x21e8 |
| end # SMBus |
| device pci 1f.6 on |
| subsystemid 0x17aa 0x21e8 |
| end # Thermal |
| end |
| end |
| end |