src/cpu/x86/cpu_info.S.inc

/* SPDX-License-Identifier: GPL-2.0-or-later */

/* Push struct cpu_info */
.macro push_cpu_info index=$0
	push	\index	/* index */
	push	$0	/* *cpu */
.endm

/* Push struct per_cpu_segment_data */
.macro push_per_cpu_segment_data cpu_info_pointer=%esp
	push	\cpu_info_pointer	/* *cpu_info */
.endm

/*
 * Sets the base address in the segment descriptor array.
 *
 * A segment descriptor has the following structure:
 *     struct {
 *         uint16_t segment_limit_0_15;
 *         uint16_t base_address_0_15;
 *         uint8_t base_address_16_23;
 *         uint8_t attrs[2];
 *         uint8_t base_address_24_31;
 *     };
 *
 * @desc_array: Address of the descriptor table
 * @base: Address to set in the descriptor
 * @desc_index: Index of the descriptor in the table. Defaults to 0. Must be a
 *              register if specified.
 *
 * Clobbers %eax, %ebx.
 */
.macro set_segment_descriptor_base desc_array:req, base:req, desc_index
	mov	\base, %eax

	mov	\desc_array, %ebx

.ifb \desc_index
	movw	%ax, 2(%ebx)
	shr	$16, %eax
	movb	%al, 4(%ebx)
	shr	$8, %eax
	movb	%al, 7(%ebx)
.else
	movw	%ax, 2(%ebx, \desc_index, 8)
	shr	$16, %eax
	movb	%al, 4(%ebx, \desc_index, 8)
	shr	$8, %eax
	movb	%al, 7(%ebx, \desc_index, 8)
.endif

.endm