| chip soc/intel/skylake |
| |
| register "PmConfigSlpS4MinAssert" = "1" # 1s |
| register "PmConfigSlpSusMinAssert" = "1" # 500ms |
| |
| # VR Slew rate setting for improving audible noise |
| register "AcousticNoiseMitigation" = "1" |
| register "SlowSlewRateForIa" = "3" # Fast/16 |
| register "SlowSlewRateForGt" = "3" # Fast/16 |
| register "SlowSlewRateForSa" = "0" # Fast/2 |
| |
| register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)" # Type-C Port (main) |
| register "usb2_ports[1]" = "USB2_PORT_MAX(OC_SKIP)" # Type-C Port (sub) |
| register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth |
| register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera |
| |
| register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port (main) |
| register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port (sub) |
| |
| register "SerialIoDevMode" = "{ |
| [PchSerialIoIndexI2C0] = PchSerialIoPci, // touchpad |
| [PchSerialIoIndexI2C1] = PchSerialIoPci, // touchscreen |
| [PchSerialIoIndexI2C2] = PchSerialIoPci, // digitizer |
| [PchSerialIoIndexI2C4] = PchSerialIoPci, // audio |
| [PchSerialIoIndexUart0] = PchSerialIoPci, |
| [PchSerialIoIndexUart2] = PchSerialIoSkipInit, |
| }" |
| |
| # PL2 override 15W |
| register "power_limits_config" = "{ |
| .tdp_pl2_override = 15, |
| }" |
| |
| # Send an extra VR mailbox command for the supported MPS IMVP8 model |
| register "SendVrMbxCmd" = "1" |
| |
| # TCC of 90C |
| register "tcc_offset" = "10" |
| |
| device domain 0 on |
| device pci 15.0 on |
| chip drivers/i2c/generic |
| register "hid" = ""ATML0001"" |
| register "desc" = ""Atmel Touchscreen"" |
| register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)" |
| device i2c 4b on end |
| end |
| end # I2C #0 |
| device pci 15.1 on |
| chip drivers/i2c/generic |
| register "hid" = ""ATML0000"" |
| register "desc" = ""Atmel Touchpad"" |
| register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)" |
| register "wake" = "GPE0_DW0_05" |
| device i2c 4a on end |
| end |
| end # I2C #1 |
| device pci 19.2 on |
| chip drivers/i2c/nau8825 |
| register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F10_IRQ)" |
| register "jkdet_enable" = "1" |
| register "jkdet_pull_enable" = "0" # R389 |
| register "jkdet_polarity" = "1" # ActiveLow |
| register "vref_impedance" = "2" # 125kOhm |
| register "micbias_voltage" = "6" # 2.754 |
| register "sar_threshold_num" = "4" |
| register "sar_threshold[0]" = "0x0c" |
| register "sar_threshold[1]" = "0x1c" |
| register "sar_threshold[2]" = "0x38" |
| register "sar_threshold[3]" = "0x60" |
| register "sar_hysteresis" = "1" |
| register "sar_voltage" = "0" # VDDA |
| register "sar_compare_time" = "0" # 500ns |
| register "sar_sampling_time" = "0" # 2us |
| register "short_key_debounce" = "2" # 100ms |
| register "jack_insert_debounce" = "4" # 64ms |
| register "jack_eject_debounce" = "4" # 64ms |
| device i2c 1a on end |
| end |
| chip drivers/i2c/generic |
| register "hid" = ""INT343B"" |
| register "desc" = ""SSM4567 Left Speaker Amp"" |
| register "uid" = "0" |
| device i2c 34 on end |
| end |
| chip drivers/i2c/generic |
| register "hid" = ""INT343B"" |
| register "desc" = ""SSM4567 Right Speaker Amp"" |
| register "uid" = "1" |
| device i2c 35 on end |
| end |
| end # I2C #4 |
| device pci 1e.6 on end # SDCard |
| end |
| end |