| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2006 AMD |
| * Written by Yinghai Lu <yinghai.lu@amd.com> for AMD. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #ifdef UNUSED_CODE |
| int set_ht_link_buffer_counts_chain(u8 ht_c_num, unsigned vendorid, unsigned val); |
| |
| static int set_ht_link_mcp55(u8 ht_c_num) |
| { |
| unsigned vendorid = 0x10de; |
| unsigned val = 0x01610109; |
| /* NVIDIA MCP55 hardcode, hardware can not set it automatically. */ |
| return set_ht_link_buffer_counts_chain(ht_c_num, vendorid, val); |
| } |
| |
| static void setup_ss_table(unsigned index, unsigned where, unsigned control, |
| const unsigned int *register_values, int max) |
| { |
| int i; |
| unsigned val; |
| |
| val = inl(control); |
| val &= 0xfffffffe; |
| outl(val, control); |
| |
| outl(0, index); /* Index */ |
| for (i = 0; i < max; i++) { |
| unsigned long reg; |
| reg = register_values[i]; |
| outl(reg, where); |
| } |
| |
| val = inl(control); |
| val |= 1; |
| outl(val, control); |
| } |
| #endif |
| |
| /* SIZE 0x100 */ |
| #define ANACTRL_IO_BASE 0x2800 |
| #define ANACTRL_REG_POS 0x68 |
| |
| /* SIZE 0x100 */ |
| #define SYSCTRL_IO_BASE 0x2400 |
| #define SYSCTRL_REG_POS 0x64 |
| |
| /* SIZE 0x100 */ |
| #define ACPICTRL_IO_BASE 0x2000 |
| #define ACPICTRL_REG_POS 0x60 |
| |
| /* |
| * 16 1 1 1 1 8 :0 |
| * 16 0 4 0 0 8 :1 |
| * 16 0 4 2 2 4 :2 |
| * 4 4 4 4 4 8 :3 |
| * 8 8 4 0 0 8 :4 |
| * 8 0 4 4 4 8 :5 |
| */ |
| |
| #define MCP55_CHIP_REV 3 |
| |
| static void mcp55_early_set_port(unsigned mcp55_num, unsigned *busn, |
| unsigned *devn, unsigned *io_base) |
| { |
| |
| static const unsigned int ctrl_devport_conf[] = { |
| PCI_ADDR(0, 1, 1, ANACTRL_REG_POS), ~(0x0000ff00), ANACTRL_IO_BASE, |
| PCI_ADDR(0, 1, 1, SYSCTRL_REG_POS), ~(0x0000ff00), SYSCTRL_IO_BASE, |
| PCI_ADDR(0, 1, 1, ACPICTRL_REG_POS), ~(0x0000ff00), ACPICTRL_IO_BASE, |
| }; |
| |
| int j; |
| for (j = 0; j < mcp55_num; j++) { |
| setup_resource_map_offset(ctrl_devport_conf, |
| ARRAY_SIZE(ctrl_devport_conf), |
| PCI_DEV(busn[j], devn[j], 0) , io_base[j]); |
| } |
| } |
| |
| static void mcp55_early_clear_port(unsigned mcp55_num, unsigned *busn, |
| unsigned *devn, unsigned *io_base) |
| { |
| static const unsigned int ctrl_devport_conf_clear[] = { |
| PCI_ADDR(0, 1, 1, ANACTRL_REG_POS), ~(0x0000ff00), 0, |
| PCI_ADDR(0, 1, 1, SYSCTRL_REG_POS), ~(0x0000ff00), 0, |
| PCI_ADDR(0, 1, 1, ACPICTRL_REG_POS), ~(0x0000ff00), 0, |
| }; |
| |
| int j; |
| for (j = 0; j < mcp55_num; j++) { |
| setup_resource_map_offset(ctrl_devport_conf_clear, |
| ARRAY_SIZE(ctrl_devport_conf_clear), |
| PCI_DEV(busn[j], devn[j], 0) , io_base[j]); |
| } |
| } |
| |
| static void mcp55_early_pcie_setup(unsigned busnx, unsigned devnx, |
| unsigned anactrl_io_base, unsigned pci_e_x) |
| { |
| u32 tgio_ctrl, pll_ctrl, dword; |
| int i; |
| pci_devfn_t dev; |
| |
| dev = PCI_DEV(busnx, devnx + 1, 1); |
| |
| dword = pci_read_config32(dev, 0xe4); |
| dword |= 0x3f0; /* Disable it at first. */ |
| pci_write_config32(dev, 0xe4, dword); |
| |
| for (i = 0; i < 3; i++) { |
| tgio_ctrl = inl(anactrl_io_base + 0xcc); |
| tgio_ctrl &= ~(3 << 9); |
| tgio_ctrl |= (i << 9); |
| outl(tgio_ctrl, anactrl_io_base + 0xcc); |
| pll_ctrl = inl(anactrl_io_base + 0x30); |
| pll_ctrl |= (1 << 31); |
| outl(pll_ctrl, anactrl_io_base + 0x30); |
| do { |
| pll_ctrl = inl(anactrl_io_base + 0x30); |
| } while (!(pll_ctrl & 1)); |
| } |
| tgio_ctrl = inl(anactrl_io_base + 0xcc); |
| tgio_ctrl &= ~((7 << 4) | (1 << 8)); |
| tgio_ctrl |= (pci_e_x << 4) | (1 << 8); |
| outl(tgio_ctrl, anactrl_io_base + 0xcc); |
| |
| udelay(100); /* Wait 100us. */ |
| |
| dword = pci_read_config32(dev, 0xe4); |
| dword &= ~(0x3f0); /* Enable. */ |
| pci_write_config32(dev, 0xe4, dword); |
| |
| mdelay(100); /* Need to wait 100ms. */ |
| } |
| |
| static void mcp55_early_setup(unsigned mcp55_num, unsigned *busn, |
| unsigned *devn, unsigned *io_base, |
| unsigned *pci_e_x) |
| { |
| static const unsigned int ctrl_conf_1[] = { |
| RES_PORT_IO_32, ACPICTRL_IO_BASE + 0x10, 0x0007ffff, 0xff78000, |
| RES_PORT_IO_32, ACPICTRL_IO_BASE + 0xa4, 0xffedffff, 0x0012000, |
| RES_PORT_IO_32, ACPICTRL_IO_BASE + 0xac, 0xfffffdff, 0x0000200, |
| RES_PORT_IO_32, ACPICTRL_IO_BASE + 0xb4, 0xfffffffd, 0x0000002, |
| |
| RES_PORT_IO_32, ANACTRL_IO_BASE + 0x24, 0xc0f0f08f, 0x26020230, |
| RES_PORT_IO_32, ANACTRL_IO_BASE + 0x34, 0x00000000, 0x22222222, |
| RES_PORT_IO_32, ANACTRL_IO_BASE + 0x08, 0x7FFFFFFF, 0x00000000, |
| RES_PORT_IO_32, ANACTRL_IO_BASE + 0x2C, 0x7FFFFFFF, 0x80000000, |
| RES_PORT_IO_32, ANACTRL_IO_BASE + 0xCC, 0xFFFFF9FF, 0x00000000, |
| RES_PORT_IO_32, ANACTRL_IO_BASE + 0x30, 0x8FFFFFFF, 0x40000000, |
| RES_PORT_IO_32, ANACTRL_IO_BASE + 0xCC, 0xFFFFF9FF, 0x00000200, |
| RES_PORT_IO_32, ANACTRL_IO_BASE + 0x30, 0x8FFFFFFF, 0x40000000, |
| RES_PORT_IO_32, ANACTRL_IO_BASE + 0xCC, 0xFFFFF9FF, 0x00000400, |
| RES_PORT_IO_32, ANACTRL_IO_BASE + 0x30, 0x8FFFFFFF, 0x40000000, |
| RES_PORT_IO_32, ANACTRL_IO_BASE + 0x74, 0xFFFF0FF5, 0x0000F000, |
| RES_PORT_IO_32, ANACTRL_IO_BASE + 0x78, 0xFF00FF00, 0x00100010, |
| RES_PORT_IO_32, ANACTRL_IO_BASE + 0x7C, 0xFF0FF0FF, 0x00500500, |
| RES_PORT_IO_32, ANACTRL_IO_BASE + 0x80, 0xFFFFFFE7, 0x00000000, |
| RES_PORT_IO_32, ANACTRL_IO_BASE + 0x60, 0xFFCFFFFF, 0x00300000, |
| RES_PORT_IO_32, ANACTRL_IO_BASE + 0x90, 0xFFFF00FF, 0x0000FF00, |
| RES_PORT_IO_32, ANACTRL_IO_BASE + 0x9C, 0xFF00FFFF, 0x00070000, |
| |
| RES_PCI_IO, PCI_ADDR(0, 0, 0, 0x40), 0x00000000, 0xCB8410DE, |
| RES_PCI_IO, PCI_ADDR(0, 0, 0, 0x48), 0xFFFFDCED, 0x00002002, |
| RES_PCI_IO, PCI_ADDR(0, 0, 0, 0x78), 0xFFFFFF8E, 0x00000011, |
| RES_PCI_IO, PCI_ADDR(0, 0, 0, 0x80), 0xFFFF0000, 0x00009923, |
| RES_PCI_IO, PCI_ADDR(0, 0, 0, 0x88), 0xFFFFFFFE, 0x00000000, |
| RES_PCI_IO, PCI_ADDR(0, 0, 0, 0x8C), 0xFFFF0000, 0x0000007F, |
| RES_PCI_IO, PCI_ADDR(0, 0, 0, 0xDC), 0xFFFEFFFF, 0x00010000, |
| |
| RES_PCI_IO, PCI_ADDR(0, 1, 0, 0x40), 0x00000000, 0xCB8410DE, |
| RES_PCI_IO, PCI_ADDR(0, 1, 0, 0x74), 0xFFFFFF7B, 0x00000084, |
| RES_PCI_IO, PCI_ADDR(0, 1, 0, 0xF8), 0xFFFFFFCF, 0x00000010, |
| |
| RES_PCI_IO, PCI_ADDR(0, 1, 1, 0xC4), 0xFFFFFFFE, 0x00000001, |
| RES_PCI_IO, PCI_ADDR(0, 1, 1, 0xF0), 0x7FFFFFFD, 0x00000002, |
| RES_PCI_IO, PCI_ADDR(0, 1, 1, 0xF8), 0xFFFFFFCF, 0x00000010, |
| |
| RES_PCI_IO, PCI_ADDR(0, 8, 0, 0x40), 0x00000000, 0xCB8410DE, |
| RES_PCI_IO, PCI_ADDR(0, 8, 0, 0x68), 0xFFFFFF00, 0x000000FF, |
| RES_PCI_IO, PCI_ADDR(0, 8, 0, 0xF8), 0xFFFFFFBF, 0x00000040, /* Enable bridge mode. */ |
| |
| RES_PCI_IO, PCI_ADDR(0, 9, 0, 0x40), 0x00000000, 0xCB8410DE, |
| RES_PCI_IO, PCI_ADDR(0, 9, 0, 0x68), 0xFFFFFF00, 0x000000FF, |
| RES_PCI_IO, PCI_ADDR(0, 9, 0, 0xF8), 0xFFFFFFBF, 0x00000040, /* Enable bridge mode. */ |
| }; |
| |
| static const unsigned int ctrl_conf_1_1[] = { |
| RES_PCI_IO, PCI_ADDR(0, 5, 0, 0x40), 0x00000000, 0xCB8410DE, |
| RES_PCI_IO, PCI_ADDR(0, 5, 0, 0x50), 0xFFFFFFFC, 0x00000003, |
| RES_PCI_IO, PCI_ADDR(0, 5, 0, 0x64), 0xFFFFFFFE, 0x00000001, |
| RES_PCI_IO, PCI_ADDR(0, 5, 0, 0x70), 0xFFF0FFFF, 0x00040000, |
| RES_PCI_IO, PCI_ADDR(0, 5, 0, 0xAC), 0xFFFFF0FF, 0x00000100, |
| RES_PCI_IO, PCI_ADDR(0, 5, 0, 0x7C), 0xFFFFFFEF, 0x00000000, |
| RES_PCI_IO, PCI_ADDR(0, 5, 0, 0xC8), 0xFF00FF00, 0x000A000A, |
| RES_PCI_IO, PCI_ADDR(0, 5, 0, 0xD0), 0xF0FFFFFF, 0x03000000, |
| RES_PCI_IO, PCI_ADDR(0, 5, 0, 0xE0), 0xF0FFFFFF, 0x03000000, |
| }; |
| |
| static const unsigned int ctrl_conf_mcp55_only[] = { |
| RES_PCI_IO, PCI_ADDR(0, 1, 1, 0x40), 0x00000000, 0xCB8410DE, |
| RES_PCI_IO, PCI_ADDR(0, 1, 1, 0xE0), 0xFFFFFEFF, 0x00000000, |
| RES_PCI_IO, PCI_ADDR(0, 1, 1, 0xE4), 0xFFFFFFFB, 0x00000000, |
| RES_PCI_IO, PCI_ADDR(0, 1, 1, 0xE8), 0xFFA9C8FF, 0x00003000, |
| |
| RES_PCI_IO, PCI_ADDR(0, 4, 0, 0x40), 0x00000000, 0xCB8410DE, |
| RES_PCI_IO, PCI_ADDR(0, 4, 0, 0xF8), 0xFFFFFFCF, 0x00000010, |
| |
| RES_PCI_IO, PCI_ADDR(0, 2, 0, 0x40), 0x00000000, 0xCB8410DE, |
| |
| RES_PCI_IO, PCI_ADDR(0, 2, 1, 0x40), 0x00000000, 0xCB8410DE, |
| RES_PCI_IO, PCI_ADDR(0, 2, 1, 0x64), 0xF87FFFFF, 0x05000000, |
| RES_PCI_IO, PCI_ADDR(0, 2, 1, 0x78), 0xFFC07FFF, 0x00360000, |
| RES_PCI_IO, PCI_ADDR(0, 2, 1, 0x68), 0xFE00D03F, 0x013F2C00, |
| RES_PCI_IO, PCI_ADDR(0, 2, 1, 0x70), 0xFFF7FFFF, 0x00080000, |
| RES_PCI_IO, PCI_ADDR(0, 2, 1, 0x7C), 0xFFFFF00F, 0x00000570, |
| RES_PCI_IO, PCI_ADDR(0, 2, 1, 0xF8), 0xFFFFFFCF, 0x00000010, |
| |
| RES_PCI_IO, PCI_ADDR(0, 6, 0, 0x04), 0xFFFFFEFB, 0x00000104, |
| RES_PCI_IO, PCI_ADDR(0, 6, 0, 0x3C), 0xF5FFFFFF, 0x0A000000, |
| RES_PCI_IO, PCI_ADDR(0, 6, 0, 0x40), 0x00C8FFFF, 0x07330000, |
| RES_PCI_IO, PCI_ADDR(0, 6, 0, 0x48), 0xFFFFFFF8, 0x00000005, |
| RES_PCI_IO, PCI_ADDR(0, 6, 0, 0x4C), 0xFE02FFFF, 0x004C0000, |
| RES_PCI_IO, PCI_ADDR(0, 6, 0, 0x74), 0xFFFFFFC0, 0x00000000, |
| RES_PCI_IO, PCI_ADDR(0, 6, 0, 0xC0), 0x00000000, 0xCB8410DE, |
| RES_PCI_IO, PCI_ADDR(0, 6, 0, 0xC4), 0xFFFFFFF8, 0x00000007, |
| #if IS_ENABLED(CONFIG_NORTHBRIDGE_AMD_AMDFAM10) |
| /* |
| * Avoid crash (complete with severe memory corruption!) during initial CAR boot |
| * in mcp55_early_setup_x() on Fam10h systems by not touching 0x78. |
| * Interestingly once the system is fully booted into Linux this can be set, but |
| * not before! Apparently something isn't initialized but the amount of effort |
| * required to fix this is non-negligible and of unknown real-world benefit |
| */ |
| #else |
| RES_PCI_IO, PCI_ADDR(0, 1, 0, 0x78), 0xC0FFFFFF, 0x19000000, |
| #endif |
| |
| #if IS_ENABLED(CONFIG_MCP55_USE_AZA) |
| RES_PCI_IO, PCI_ADDR(0, 6, 1, 0x40), 0x00000000, 0xCB8410DE, |
| |
| #endif |
| |
| #ifdef MCP55_MB_SETUP |
| /* Play a while with GPIO in MCP55. */ |
| MCP55_MB_SETUP |
| #endif |
| |
| #if IS_ENABLED(CONFIG_MCP55_USE_AZA) |
| RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 21, ~(3 << 2), (2 << 2), |
| RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 22, ~(3 << 2), (2 << 2), |
| RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 46, ~(3 << 2), (2 << 2), |
| #endif |
| }; |
| |
| static const unsigned int ctrl_conf_master_only[] = { |
| RES_PORT_IO_32, ACPICTRL_IO_BASE + 0x80, 0xEFFFFFF, 0x01000000, |
| |
| /* Master MCP55???? YHLU */ |
| RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 0, ~(3 << 2), (0 << 2), |
| }; |
| |
| static const unsigned int ctrl_conf_2[] = { |
| /* I didn't put PCI-E related stuff here. */ |
| |
| RES_PCI_IO, PCI_ADDR(0, 0, 0, 0x74), 0xFFFFF00F, 0x000009D0, |
| RES_PCI_IO, PCI_ADDR(0, 1, 0, 0x74), 0xFFFF7FFF, 0x00008000, |
| |
| RES_PORT_IO_32, SYSCTRL_IO_BASE + 0x48, 0xFFFEFFFF, 0x00010000, |
| |
| RES_PORT_IO_32, ANACTRL_IO_BASE + 0x60, 0xFFFFFF00, 0x00000012, |
| |
| #if IS_ENABLED(CONFIG_MCP55_USE_NIC) |
| RES_PCI_IO, PCI_ADDR(0, 1, 1, 0xe4), ~((1 << 22) | (1 << 20)), (1 << 22) | (1 << 20), |
| |
| RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 4, ~(0xff), ((0 << 4) | (1 << 2) | (0 << 0)), |
| RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 4, ~(0xff), ((0 << 4) | (1 << 2) | (1 << 0)), |
| #endif |
| }; |
| |
| int j, i; |
| |
| for (j = 0; j < mcp55_num; j++) { |
| mcp55_early_pcie_setup(busn[j], devn[j], |
| io_base[j] + ANACTRL_IO_BASE, pci_e_x[j]); |
| |
| setup_resource_map_x_offset(ctrl_conf_1, |
| ARRAY_SIZE(ctrl_conf_1), |
| PCI_DEV(busn[j], devn[j], 0), io_base[j]); |
| |
| for (i = 0; i < 3; i++) { /* Three SATA */ |
| setup_resource_map_x_offset(ctrl_conf_1_1, |
| ARRAY_SIZE(ctrl_conf_1_1), |
| PCI_DEV(busn[j], devn[j], i), io_base[j]); |
| } |
| |
| if (busn[j] == 0) { |
| setup_resource_map_x_offset(ctrl_conf_mcp55_only, |
| ARRAY_SIZE(ctrl_conf_mcp55_only), |
| PCI_DEV(busn[j], devn[j], 0), io_base[j]); |
| } |
| |
| if ((busn[j] == 0) && (mcp55_num>1)) { |
| setup_resource_map_x_offset(ctrl_conf_master_only, |
| ARRAY_SIZE(ctrl_conf_master_only), |
| PCI_DEV(busn[j], devn[j], 0), io_base[j]); |
| } |
| |
| setup_resource_map_x_offset(ctrl_conf_2, |
| ARRAY_SIZE(ctrl_conf_2), |
| PCI_DEV(busn[j], devn[j], 0), io_base[j]); |
| } |
| |
| } |
| |
| #ifndef HT_CHAIN_NUM_MAX |
| |
| #define HT_CHAIN_NUM_MAX 4 |
| #define HT_CHAIN_BUSN_D 0x40 |
| #define HT_CHAIN_IOBASE_D 0x4000 |
| |
| #endif |
| |
| static int mcp55_early_setup_x(void) |
| { |
| /* Find out how many MCP55 we have. */ |
| unsigned busn[HT_CHAIN_NUM_MAX] = {0}; |
| unsigned devn[HT_CHAIN_NUM_MAX] = {0}; |
| unsigned io_base[HT_CHAIN_NUM_MAX] = {0}; |
| |
| /* |
| * FIXME: May have problem if there is different MCP55 HTX card with |
| * different PCI_E lane allocation. Need to use same trick about |
| * pci1234 to verify node/link connection. |
| */ |
| unsigned pci_e_x[HT_CHAIN_NUM_MAX] = { |
| CONFIG_MCP55_PCI_E_X_0, CONFIG_MCP55_PCI_E_X_1, |
| CONFIG_MCP55_PCI_E_X_2, CONFIG_MCP55_PCI_E_X_3, |
| }; |
| int mcp55_num = 0, ht_c_index; |
| unsigned busnx, devnx; |
| |
| /* FIXME: Multi PCI segment handling. */ |
| |
| /* Any system that only have IO55 without MCP55? */ |
| for (ht_c_index = 0; ht_c_index < HT_CHAIN_NUM_MAX; ht_c_index++) { |
| busnx = ht_c_index * HT_CHAIN_BUSN_D; |
| for (devnx = 0; devnx < 0x20; devnx++) { |
| u32 id; |
| pci_devfn_t dev; |
| dev = PCI_DEV(busnx, devnx, 0); |
| id = pci_read_config32(dev, PCI_VENDOR_ID); |
| if (id == 0x036910de) { |
| busn[mcp55_num] = busnx; |
| devn[mcp55_num] = devnx; |
| |
| /* We may have HT chain other than MCP55. */ |
| io_base[mcp55_num] |
| = ht_c_index * HT_CHAIN_IOBASE_D; |
| |
| mcp55_num++; |
| if (mcp55_num == CONFIG_MCP55_NUM) |
| goto out; |
| break; /* Only one MCP55 on one chain. */ |
| } |
| } |
| } |
| |
| out: |
| printk(BIOS_DEBUG, "mcp55_num: %02x\n", mcp55_num); |
| |
| mcp55_early_set_port(mcp55_num, busn, devn, io_base); |
| mcp55_early_setup(mcp55_num, busn, devn, io_base, pci_e_x); |
| |
| mcp55_early_clear_port(mcp55_num, busn, devn, io_base); |
| |
| return 0; |
| } |