| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2011 Sven Schnelle <svens@stackframe.org> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; version 2 of |
| * the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <console/console.h> |
| #include <device/device.h> |
| #include <arch/io.h> |
| #include <delay.h> |
| #include <arch/io.h> |
| #include "dock.h" |
| #include <southbridge/intel/i82801gx/i82801gx.h> |
| #include <superio/nsc/pc87392/pc87392.h> |
| |
| static void dlpc_write_register(int reg, int value) |
| { |
| outb(reg, 0x164e); |
| outb(value, 0x164f); |
| } |
| |
| static u8 dlpc_read_register(int reg) |
| { |
| outb(reg, 0x164e); |
| return inb(0x164f); |
| } |
| |
| static void dock_write_register(int reg, int value) |
| { |
| outb(reg, 0x2e); |
| outb(value, 0x2f); |
| } |
| |
| static u8 dock_read_register(int reg) |
| { |
| outb(reg, 0x2e); |
| return inb(0x2f); |
| } |
| |
| static void dlpc_gpio_set_mode(int port, int mode) |
| { |
| dlpc_write_register(0xf0, port); |
| dlpc_write_register(0xf1, mode); |
| } |
| |
| static void dock_gpio_set_mode(int port, int mode, int irq) |
| { |
| dock_write_register(0xf0, port); |
| dock_write_register(0xf1, mode); |
| dock_write_register(0xf2, irq); |
| } |
| |
| static void dlpc_gpio_init(void) |
| { |
| /* Select GPIO module */ |
| dlpc_write_register(0x07, 0x07); |
| /* GPIO Base Address 0x1680 */ |
| dlpc_write_register(0x60, 0x16); |
| dlpc_write_register(0x61, 0x80); |
| |
| /* Activate GPIO */ |
| dlpc_write_register(0x30, 0x01); |
| |
| dlpc_gpio_set_mode(0x00, 3); |
| dlpc_gpio_set_mode(0x01, 3); |
| dlpc_gpio_set_mode(0x02, 0); |
| dlpc_gpio_set_mode(0x03, 3); |
| dlpc_gpio_set_mode(0x04, 4); |
| dlpc_gpio_set_mode(0x20, 4); |
| dlpc_gpio_set_mode(0x21, 4); |
| dlpc_gpio_set_mode(0x23, 4); |
| } |
| |
| int dlpc_init(void) |
| { |
| int timeout = 1000; |
| |
| /* Enable 14.318MHz CLK on CLKIN */ |
| dlpc_write_register(0x29, 0xa0); |
| while(!(dlpc_read_register(0x29) & 0x10) && timeout--) |
| udelay(1000); |
| |
| if (!timeout) |
| return 1; |
| |
| /* Select DLPC module */ |
| dlpc_write_register(0x07, 0x19); |
| /* DLPC Base Address 0x164c */ |
| dlpc_write_register(0x60, 0x16); |
| dlpc_write_register(0x61, 0x4c); |
| /* Activate DLPC */ |
| dlpc_write_register(0x30, 0x01); |
| |
| dlpc_gpio_init(); |
| |
| return 0; |
| } |
| |
| int dock_connect(void) |
| { |
| int timeout = 1000; |
| |
| outb(0x07, 0x164c); |
| |
| timeout = 1000; |
| |
| while(!(inb(0x164c) & 8) && timeout--) |
| udelay(1000); |
| |
| if (!timeout) { |
| /* docking failed, disable DLPC switch */ |
| outb(0x00, 0x164c); |
| dlpc_write_register(0x30, 0x00); |
| return 1; |
| } |
| |
| /* Assert D_PLTRST# */ |
| outb(0xfe, 0x1680); |
| udelay(100000); |
| /* Deassert D_PLTRST# */ |
| outb(0xff, 0x1680); |
| |
| udelay(100000); |
| |
| /* startup 14.318MHz Clock */ |
| dock_write_register(0x29, 0x06); |
| /* wait until clock is settled */ |
| timeout = 1000; |
| while(!(dock_read_register(0x29) & 0x08) && timeout--) |
| udelay(1000); |
| |
| if (!timeout) |
| return 1; |
| |
| /* Pin 6: CLKRUN |
| * Pin 72: #DR1 |
| * Pin 19: #SMI |
| * Pin 73: #MTR |
| */ |
| dock_write_register(0x24, 0x37); |
| |
| /* PNF active HIGH */ |
| dock_write_register(0x25, 0xa0); |
| |
| /* disable FDC */ |
| dock_write_register(0x26, 0x01); |
| |
| /* Enable GPIO IRQ to #SMI */ |
| dock_write_register(0x28, 0x02); |
| |
| /* select GPIO */ |
| dock_write_register(0x07, 0x07); |
| |
| /* set base address */ |
| dock_write_register(0x60, 0x16); |
| dock_write_register(0x61, 0x20); |
| |
| /* init GPIO pins */ |
| dock_gpio_set_mode(0x00, PC87392_GPIO_PIN_DEBOUNCE | |
| PC87392_GPIO_PIN_PULLUP, 0x00); |
| |
| dock_gpio_set_mode(0x01, PC87392_GPIO_PIN_DEBOUNCE | |
| PC87392_GPIO_PIN_PULLUP, |
| PC87392_GPIO_PIN_TRIGGERS_SMI); |
| |
| dock_gpio_set_mode(0x02, PC87392_GPIO_PIN_PULLUP, 0x00); |
| dock_gpio_set_mode(0x03, PC87392_GPIO_PIN_PULLUP, 0x00); |
| dock_gpio_set_mode(0x04, PC87392_GPIO_PIN_PULLUP, 0x00); |
| dock_gpio_set_mode(0x05, PC87392_GPIO_PIN_PULLUP, 0x00); |
| dock_gpio_set_mode(0x06, PC87392_GPIO_PIN_PULLUP, 0x00); |
| dock_gpio_set_mode(0x07, PC87392_GPIO_PIN_PULLUP, 0x02); |
| |
| dock_gpio_set_mode(0x10, PC87392_GPIO_PIN_DEBOUNCE | |
| PC87392_GPIO_PIN_PULLUP, |
| PC87392_GPIO_PIN_TRIGGERS_SMI); |
| |
| dock_gpio_set_mode(0x11, PC87392_GPIO_PIN_PULLUP, 0x00); |
| dock_gpio_set_mode(0x12, PC87392_GPIO_PIN_PULLUP, 0x00); |
| dock_gpio_set_mode(0x13, PC87392_GPIO_PIN_PULLUP, 0x00); |
| dock_gpio_set_mode(0x14, PC87392_GPIO_PIN_PULLUP, 0x00); |
| dock_gpio_set_mode(0x15, PC87392_GPIO_PIN_PULLUP, 0x00); |
| dock_gpio_set_mode(0x16, PC87392_GPIO_PIN_PULLUP | |
| PC87392_GPIO_PIN_OE , 0x00); |
| |
| dock_gpio_set_mode(0x17, PC87392_GPIO_PIN_PULLUP, 0x00); |
| |
| dock_gpio_set_mode(0x20, PC87392_GPIO_PIN_TYPE_PUSH_PULL | |
| PC87392_GPIO_PIN_OE, 0x00); |
| |
| dock_gpio_set_mode(0x21, PC87392_GPIO_PIN_TYPE_PUSH_PULL | |
| PC87392_GPIO_PIN_OE, 0x00); |
| |
| dock_gpio_set_mode(0x22, PC87392_GPIO_PIN_PULLUP, 0x00); |
| dock_gpio_set_mode(0x23, PC87392_GPIO_PIN_PULLUP, 0x00); |
| dock_gpio_set_mode(0x24, PC87392_GPIO_PIN_PULLUP, 0x00); |
| dock_gpio_set_mode(0x25, PC87392_GPIO_PIN_PULLUP, 0x00); |
| dock_gpio_set_mode(0x26, PC87392_GPIO_PIN_PULLUP, 0x00); |
| dock_gpio_set_mode(0x27, PC87392_GPIO_PIN_PULLUP, 0x00); |
| |
| dock_gpio_set_mode(0x30, PC87392_GPIO_PIN_PULLUP, 0x00); |
| dock_gpio_set_mode(0x31, PC87392_GPIO_PIN_PULLUP, 0x00); |
| dock_gpio_set_mode(0x32, PC87392_GPIO_PIN_PULLUP, 0x00); |
| dock_gpio_set_mode(0x33, PC87392_GPIO_PIN_PULLUP, 0x00); |
| dock_gpio_set_mode(0x34, PC87392_GPIO_PIN_PULLUP, 0x00); |
| |
| dock_gpio_set_mode(0x35, PC87392_GPIO_PIN_PULLUP | |
| PC87392_GPIO_PIN_OE, 0x00); |
| |
| dock_gpio_set_mode(0x36, PC87392_GPIO_PIN_PULLUP, 0x00); |
| dock_gpio_set_mode(0x37, PC87392_GPIO_PIN_PULLUP, 0x00); |
| |
| /* enable GPIO */ |
| dock_write_register(0x30, 0x01); |
| |
| outb(0x00, 0x1628); |
| outb(0x00, 0x1623); |
| outb(0x82, 0x1622); |
| outb(0xff, 0x1624); |
| |
| /* Enable USB and Ultrabay power */ |
| outb(0x03, 0x1628); |
| |
| dock_write_register(0x07, 0x03); |
| dock_write_register(0x30, 0x01); |
| return 0; |
| } |
| |
| void dock_disconnect(void) |
| { |
| printk(BIOS_DEBUG, "%s enter\n", __func__); |
| /* disconnect LPC bus */ |
| outb(0x00, 0x164c); |
| udelay(10000); |
| |
| /* Assert PLTRST and DLPCPD */ |
| outb(0xfc, 0x1680); |
| udelay(10000); |
| |
| /* disable Ultrabay and USB Power */ |
| outb(0x00, 0x1628); |
| udelay(10000); |
| |
| printk(BIOS_DEBUG, "%s finish\n", __func__); |
| } |
| |
| int dock_present(void) |
| { |
| return !((inw(DEFAULT_GPIOBASE + 0x0c) >> 13) & 1); |
| } |
| |
| int dock_ultrabay_device_present(void) |
| { |
| return inb(0x1621) & 0x02 ? 0 : 1; |
| } |