| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2012 Advanced Micro Devices, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include "AGESA.h" |
| #include <northbridge/amd/agesa/BiosCallOuts.h> |
| #include <northbridge/amd/agesa/state_machine.h> |
| #include "FchPlatform.h" |
| #include "cbfs.h" |
| #include "imc.h" |
| #include <stdlib.h> |
| |
| const BIOS_CALLOUT_STRUCT BiosCallouts[] = |
| { |
| {AGESA_DO_RESET, agesa_Reset }, |
| {AGESA_READ_SPD, agesa_ReadSpd_from_cbfs }, |
| {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, |
| {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, |
| {AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData }, |
| {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, |
| {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, |
| {AGESA_GNB_GFX_GET_VBIOS_IMAGE, agesa_GfxGetVbiosImage } |
| }; |
| const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); |
| |
| /** |
| * ALC272 Verb Table |
| */ |
| const CODEC_ENTRY Alc272_VerbTbl[] = { |
| {0x11, 0x411111F0}, // - SPDIF_OUT2 |
| {0x12, 0x411111F0}, // - DMIC_1/2 |
| {0x13, 0x411111F0}, // - DMIC_3/4 |
| {0x14, 0x411111F0}, // Port D - LOUT1 |
| {0x15, 0x01011050}, // Port A - LOUT2 Explorer 2x DAC |
| {0x16, 0x411111F0}, // |
| {0x17, 0x411111F0}, // Port H - MONO |
| {0x18, 0x01a11840}, // Port B - MIC1 |
| {0x19, 0x411111F0}, // Port F - MIC2 |
| {0x1a, 0x01811030}, // Port C - LINE1 |
| {0x1b, 0x01811020}, // Port E - LINE2 Explorer 2x ADC |
| {0x1d, 0x40130605}, // - PCBEEP |
| {0x1e, 0x411111F0}, // - SPDIF_OUT1 |
| {0x21, 0x01211010}, // Port I - HPOUT |
| {0xff, 0xffffffff} |
| }; |
| |
| static const CODEC_TBL_LIST CodecTableList[] = |
| { |
| {0x10ec0272, (CODEC_ENTRY*)&Alc272_VerbTbl[0]}, |
| {(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL} |
| }; |
| |
| #define FAN_INPUT_INTERNAL_DIODE 0 |
| #define FAN_INPUT_TEMP0 1 |
| #define FAN_INPUT_TEMP1 2 |
| #define FAN_INPUT_TEMP2 3 |
| #define FAN_INPUT_TEMP3 4 |
| #define FAN_INPUT_TEMP0_FILTER 5 |
| #define FAN_INPUT_ZERO 6 |
| #define FAN_INPUT_DISABLED 7 |
| |
| #define FAN_AUTOMODE (1 << 0) |
| #define FAN_LINEARMODE (1 << 1) |
| #define FAN_STEPMODE ~(1 << 1) |
| #define FAN_POLARITY_HIGH (1 << 2) |
| #define FAN_POLARITY_LOW ~(1 << 2) |
| |
| /* Normally, 4-wire fan runs at 25KHz and 3-wire fan runs at 100Hz */ |
| #define FREQ_28KHZ 0x0 |
| #define FREQ_25KHZ 0x1 |
| #define FREQ_23KHZ 0x2 |
| #define FREQ_21KHZ 0x3 |
| #define FREQ_29KHZ 0x4 |
| #define FREQ_18KHZ 0x5 |
| #define FREQ_100HZ 0xF7 |
| #define FREQ_87HZ 0xF8 |
| #define FREQ_58HZ 0xF9 |
| #define FREQ_44HZ 0xFA |
| #define FREQ_35HZ 0xFB |
| #define FREQ_29HZ 0xFC |
| #define FREQ_22HZ 0xFD |
| #define FREQ_14HZ 0xFE |
| #define FREQ_11HZ 0xFF |
| |
| /* Hardware Monitor Fan Control |
| * Hardware limitation: |
| * HWM failed to read the input temperture vi I2C, |
| * if other software switch the I2C switch by mistake or intention. |
| * We recommend to using IMC to control Fans, instead of HWM. |
| */ |
| static void oem_fan_control(FCH_DATA_BLOCK *FchParams) |
| { |
| /* Enable IMC fan control. the recommand way */ |
| if (IS_ENABLED(CONFIG_HUDSON_IMC_FWM)) { |
| imc_reg_init(); |
| |
| /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */ |
| FchParams->Hwm.HwMonitorEnable = TRUE; |
| FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */ |
| |
| FchParams->Imc.ImcEnable = TRUE; |
| FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */ |
| FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */ |
| |
| LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader); |
| |
| /* Thermal Zone Parameter */ |
| FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00; |
| FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */ |
| FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5; |
| FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x4e;//6 | BIT3; |
| FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00; |
| FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x04; |
| FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x9a; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ |
| FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x01; |
| FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM steping rate in unit of PWM level percentage */ |
| FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00; |
| |
| /* IMC Fan Policy temperature thresholds */ |
| FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00; |
| FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */ |
| FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 50; /*AC0 threshold in Celsius */ |
| FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 45; /*AC1 threshold in Celsius */ |
| FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 40; /*AC2 threshold in Celsius */ |
| FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */ |
| FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */ |
| FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */ |
| FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */ |
| FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */ |
| FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */ |
| FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00; |
| |
| /* IMC Fan Policy PWM Settings */ |
| FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00; |
| FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */ |
| FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 100; /* AL0 percentage */ |
| FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 99; /* AL1 percentage */ |
| FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 98; /* AL2 percentage */ |
| FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */ |
| FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */ |
| FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */ |
| FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */ |
| FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */ |
| |
| FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8; |
| |
| /* NOTE: |
| * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege, |
| * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it. |
| * so we remove it from AGESA code. Please Seee FchInitLateHwm. |
| */ |
| } else { |
| /* HWM fan control, the way not recommand */ |
| FchParams->Imc.ImcEnable = FALSE; |
| FchParams->Hwm.HwMonitorEnable = TRUE; |
| FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */ |
| } |
| } |
| |
| void board_FCH_InitReset(struct sysinfo *cb_NA, FCH_RESET_DATA_BLOCK *FchParams_reset) |
| { |
| } |
| |
| void board_FCH_InitEnv(struct sysinfo *cb_NA, FCH_DATA_BLOCK *FchParams_env) |
| { |
| /* Azalia Controller OEM Codec Table Pointer */ |
| FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&CodecTableList[0]); |
| |
| FchParams_env->Imc.ImcEnable = FALSE; |
| FchParams_env->Hwm.HwMonitorEnable = FALSE; |
| FchParams_env->Hwm.HwmFchtsiAutoPoll = FALSE;/* 1 enable, 0 disable TSI Auto Polling */ |
| |
| /* Fan Control */ |
| oem_fan_control(FchParams_env); |
| } |