| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2010 Advanced Micro Devices, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <console/console.h> |
| #include <device/device.h> |
| #include <device/pci.h> |
| #include <arch/io.h> |
| #include <device/pci_def.h> |
| #include <southbridge/amd/sb700/sb700.h> |
| #include <southbridge/amd/sb700/smbus.h> |
| #include <southbridge/amd/rs780/rs780.h> |
| |
| #define ADT7461_ADDRESS 0x4C |
| #define ARA_ADDRESS 0x0C /* Alert Response Address */ |
| |
| #define ADT7461_read_byte(address) \ |
| do_smbus_read_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address) |
| #define ARA_read_byte(address) \ |
| do_smbus_read_byte(SMBUS_IO_BASE, ARA_ADDRESS, address) |
| #define ADT7461_write_byte(address, val) \ |
| do_smbus_write_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address, val) |
| |
| void set_pcie_dereset(void) |
| { |
| u8 byte; |
| u16 word; |
| struct device *sm_dev; |
| /* set 0 to bit1 :disable GPM9 as SLP_S2 output */ |
| /* set 0 to bit2 :disable GPM8 as AZ_RST output */ |
| byte = pm_ioread(0x8d); |
| byte &= ~((1 << 1) | (1 << 2)); |
| pm_iowrite(0x8d, byte); |
| |
| /* set the GPM8 and GPM9 output enable and the value to 1 */ |
| byte = pm_ioread(0x94); |
| byte &= ~((1 << 2) | (1 << 3)); |
| byte |= ((1 << 0) | (1 << 1)); |
| pm_iowrite(0x94, byte); |
| |
| /* set the GPIO65 output enable and the value is 1 */ |
| sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); |
| word = pci_read_config16(sm_dev, 0x7e); |
| word |= (1 << 0); |
| word &= ~(1 << 4); |
| pci_write_config16(sm_dev, 0x7e, word); |
| } |
| |
| void set_pcie_reset(void) |
| { |
| u8 byte; |
| u16 word; |
| struct device *sm_dev; |
| |
| /* set 0 to bit1 :disable GPM9 as SLP_S2 output */ |
| /* set 0 to bit2 :disable GPM8 as AZ_RST output */ |
| byte = pm_ioread(0x8d); |
| byte &= ~((1 << 1) | (1 << 2)); |
| pm_iowrite(0x8d, byte); |
| |
| /* set the GPM8 and GPM9 output enable and the value to 0 */ |
| byte = pm_ioread(0x94); |
| byte &= ~((1 << 2) | (1 << 3)); |
| byte &= ~((1 << 0) | (1 << 1)); |
| pm_iowrite(0x94, byte); |
| |
| /* set the GPIO65 output enable and the value is 0 */ |
| sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); |
| word = pci_read_config16(sm_dev, 0x7e); |
| word &= ~(1 << 0); |
| word &= ~(1 << 4); |
| pci_write_config16(sm_dev, 0x7e, word); |
| } |
| |
| /* |
| * justify the dev3 is exist or not |
| * NOTE: This just copied from AMD Tilapia code. |
| * It is completely unknown it it will work at all for ASUS M4A785-M. |
| */ |
| int is_dev3_present(void) |
| { |
| u16 word; |
| struct device *sm_dev; |
| |
| /* access the smbus extended register */ |
| sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); |
| |
| /* put the GPIO68 output to tristate */ |
| word = pci_read_config16(sm_dev, 0x7e); |
| word |= 1 << 6; |
| pci_write_config16(sm_dev, 0x7e,word); |
| |
| /* read the GPIO68 input status */ |
| word = pci_read_config16(sm_dev, 0x7e); |
| |
| if(word & (1 << 10)){ |
| /*not exist*/ |
| return 0; |
| }else{ |
| /*exist*/ |
| return 1; |
| } |
| } |
| |
| /* |
| * set thermal config |
| */ |
| static void set_thermal_config(void) |
| { |
| u8 byte; |
| u16 word; |
| struct device *sm_dev; |
| |
| /* set ADT 7461 */ |
| ADT7461_write_byte(0x0B, 0x50); /* Local Temperature Hight limit */ |
| ADT7461_write_byte(0x0C, 0x00); /* Local Temperature Low limit */ |
| ADT7461_write_byte(0x0D, 0x50); /* External Temperature Hight limit High Byte */ |
| ADT7461_write_byte(0x0E, 0x00); /* External Temperature Low limit High Byte */ |
| |
| ADT7461_write_byte(0x19, 0x55); /* External THERM limit */ |
| ADT7461_write_byte(0x20, 0x55); /* Local THERM limit */ |
| |
| byte = ADT7461_read_byte(0x02); /* read status register to clear it */ |
| ARA_read_byte(0x05); /* A hardware alert can only be cleared by the master sending an ARA as a read command */ |
| printk(BIOS_INFO, "Init adt7461 end , status 0x02 %02x\n", byte); |
| |
| /* sb700 settings for thermal config */ |
| /* set SB700 GPIO 64 to GPIO with pull-up */ |
| byte = pm2_ioread(0x42); |
| byte &= 0x3f; |
| pm2_iowrite(0x42, byte); |
| |
| /* set GPIO 64 to input */ |
| sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); |
| word = pci_read_config16(sm_dev, 0x56); |
| word |= 1 << 7; |
| pci_write_config16(sm_dev, 0x56, word); |
| |
| /* set GPIO 64 internal pull-up */ |
| byte = pm2_ioread(0xf0); |
| byte &= 0xee; |
| pm2_iowrite(0xf0, byte); |
| |
| /* set Talert to be active low */ |
| byte = pm_ioread(0x67); |
| byte &= ~(1 << 5); |
| pm_iowrite(0x67, byte); |
| |
| /* set Talert to generate ACPI event */ |
| byte = pm_ioread(0x3c); |
| byte &= 0xf3; |
| pm_iowrite(0x3c, byte); |
| |
| /* THERMTRIP pin */ |
| /* byte = pm_ioread(0x68); |
| * byte |= 1 << 3; |
| * pm_iowrite(0x68, byte); |
| * |
| * byte = pm_ioread(0x55); |
| * byte |= 1 << 0; |
| * pm_iowrite(0x55, byte); |
| * |
| * byte = pm_ioread(0x67); |
| * byte &= ~( 1 << 6); |
| * pm_iowrite(0x67, byte); |
| */ |
| } |
| |
| /************************************************* |
| * enable the dedicated function in this board. |
| * This function called early than rs780_enable. |
| *************************************************/ |
| static void mainboard_enable(struct device *dev) |
| { |
| printk(BIOS_INFO, "Mainboard enable. dev=0x%p\n", dev); |
| |
| set_pcie_dereset(); |
| /* get_ide_dma66(); */ |
| set_thermal_config(); |
| } |
| |
| struct chip_operations mainboard_ops = { |
| .enable_dev = mainboard_enable, |
| }; |