| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2012 Advanced Micro Devices, Inc. |
| * 2013 - 2014 Sage Electronic Engineering, LLC |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include "AGESA.h" |
| #include <northbridge/amd/agesa/BiosCallOuts.h> |
| #include <device/azalia.h> |
| #include "FchPlatform.h" |
| #include "cbfs.h" |
| #include "imc.h" |
| #include "hudson.h" |
| #include <stdlib.h> |
| |
| static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINTN FchData, VOID *ConfigPtr); |
| |
| const BIOS_CALLOUT_STRUCT BiosCallouts[] = |
| { |
| {AGESA_READ_SPD, agesa_ReadSpd_from_cbfs }, |
| {AGESA_DO_RESET, agesa_Reset }, |
| {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, |
| {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, |
| {AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData }, |
| {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, |
| {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, |
| {AGESA_FCH_OEM_CALLOUT, Fch_Oem_config }, |
| {AGESA_GNB_GFX_GET_VBIOS_IMAGE, agesa_GfxGetVbiosImage } |
| }; |
| const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); |
| |
| /** |
| * Realtek ALC272 CODEC Verb Table |
| */ |
| static const CODEC_ENTRY Alc272_VerbTbl[] = { |
| { 0x11, 0x411111F0 }, /* - S/PDIF Output 2 */ |
| { 0x12, 0x411111F0 }, /* - Digital Mic 1/2 [GPIO0] */ |
| { 0x13, 0x411111F0 }, /* - Digital Mic 3/4 [GPIO1] */ |
| { 0x14, 0x411111F0 }, /* Port D - Front Panel headphone */ |
| { 0x15, 0x411111F0 }, /* Port A - Surround */ |
| { 0x17, 0x411111F0 }, /* Port H - Mono */ |
| { 0x18, /* Port B - MIC - combo jack */ |
| (AZALIA_PINCFG_PORT_JACK << 30) |
| | ((AZALIA_PINCFG_LOCATION_EXTERNAL | AZALIA_PINCFG_LOCATION_REAR) << 24) |
| | (AZALIA_PINCFG_DEVICE_MICROPHONE << 20) |
| | (AZALIA_PINCFG_CONN_MINI_HEADPHONE_JACK << 16) |
| | (AZALIA_PINCFG_COLOR_BLACK << 12) |
| | (4 << 4) |
| | (0 << 0) |
| }, |
| { 0x19, 0x411111F0 }, /* Port F - Front Panel Mic */ |
| { 0x1A, 0x411111F0 }, /* Port C - LINE1 */ |
| { 0x1B, 0x411111F0 }, /* Port E - Front Panel line-out */ |
| { 0x1D, 0x40130605 }, /* - PCBEEP */ |
| { 0x1E, 0x411111F0 }, /* - SPDIF_OUT1 */ |
| { 0x21, /* Port I - HPout - combo jack */ |
| (AZALIA_PINCFG_PORT_JACK << 30) |
| | ((AZALIA_PINCFG_LOCATION_EXTERNAL | AZALIA_PINCFG_LOCATION_REAR) << 24) |
| | (AZALIA_PINCFG_DEVICE_HP_OUT << 20) |
| | (AZALIA_PINCFG_CONN_MINI_HEADPHONE_JACK << 16) |
| | (AZALIA_PINCFG_COLOR_BLACK << 12) |
| | (4 << 4) |
| | (0 << 0) |
| }, |
| { 0xFF, 0xFFFFFFFF }, |
| }; |
| |
| static const CODEC_TBL_LIST CodecTableList[] = |
| { |
| {0x10ec0272, Alc272_VerbTbl}, |
| {(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL} |
| }; |
| |
| #define FAN_INPUT_INTERNAL_DIODE 0 |
| #define FAN_INPUT_TEMP0 1 |
| #define FAN_INPUT_TEMP1 2 |
| #define FAN_INPUT_TEMP2 3 |
| #define FAN_INPUT_TEMP3 4 |
| #define FAN_INPUT_TEMP0_FILTER 5 |
| #define FAN_INPUT_ZERO 6 |
| #define FAN_INPUT_DISABLED 7 |
| |
| #define FAN_AUTOMODE (1 << 0) |
| #define FAN_LINEARMODE (1 << 1) |
| #define FAN_STEPMODE ~(1 << 1) |
| #define FAN_POLARITY_HIGH (1 << 2) |
| #define FAN_POLARITY_LOW ~(1 << 2) |
| |
| /* Normally, 4-wire fan runs at 25KHz and 3-wire fan runs at 100Hz */ |
| #define FREQ_28KHZ 0x0 |
| #define FREQ_25KHZ 0x1 |
| #define FREQ_23KHZ 0x2 |
| #define FREQ_21KHZ 0x3 |
| #define FREQ_29KHZ 0x4 |
| #define FREQ_18KHZ 0x5 |
| #define FREQ_100HZ 0xF7 |
| #define FREQ_87HZ 0xF8 |
| #define FREQ_58HZ 0xF9 |
| #define FREQ_44HZ 0xFA |
| #define FREQ_35HZ 0xFB |
| #define FREQ_29HZ 0xFC |
| #define FREQ_22HZ 0xFD |
| #define FREQ_14HZ 0xFE |
| #define FREQ_11HZ 0xFF |
| |
| /* |
| * Hardware Monitor Fan Control |
| * Hardware limitation: |
| * HWM will fail to read the input temperature via I2C if other |
| * software switches the I2C address. AMD recommends using IMC |
| * to control fans, instead of HWM. |
| */ |
| static void oem_fan_control(FCH_DATA_BLOCK *FchParams) |
| { |
| FCH_HWM_FAN_CTR oem_factl[5] = { |
| /*temperature input, fan mode, frequency, low_duty, med_duty, multiplier, lowtemp, medtemp, hightemp, LinearRange, LinearHoldCount */ |
| /* DB-FT3 FanOUT0 Fan header J32 */ |
| {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, |
| /* DB-FT3 FanOUT1 Fan header J31*/ |
| {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, |
| {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, |
| {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, |
| {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0}, |
| }; |
| LibAmdMemCopy ((VOID *)(FchParams->Hwm.HwmFanControl), &oem_factl, (sizeof (FCH_HWM_FAN_CTR) * 5), FchParams->StdHeader); |
| |
| /* Enable IMC fan control. the recommended way */ |
| if (IS_ENABLED(CONFIG_HUDSON_IMC_FWM)) { |
| /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */ |
| FchParams->Hwm.HwMonitorEnable = TRUE; |
| FchParams->Hwm.HwmFchtsiAutoPoll = FALSE; /* 0 disable, 1 enable TSI Auto Polling */ |
| |
| FchParams->Imc.ImcEnable = TRUE; |
| FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */ |
| FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */ |
| |
| LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader); |
| |
| /* Thermal Zone Parameter */ |
| FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00; |
| FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */ |
| FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x00; /* BIT0 | BIT2 | BIT5 */ |
| FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x00; /* 6 | BIT3 */ |
| FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00; |
| FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x00; |
| FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ |
| FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 2; |
| FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */ |
| FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0; |
| |
| /* IMC Fan Policy temperature thresholds */ |
| FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00; |
| FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */ |
| FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0; /* AC0 threshold in Celsius */ |
| FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0; /* AC1 threshold in Celsius */ |
| FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0; /* AC2 threshold in Celsius */ |
| FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0; /* AC3 threshold in Celsius, 0xFF is not define */ |
| FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0; /* AC4 threshold in Celsius, 0xFF is not define */ |
| FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0; /* AC5 threshold in Celsius, 0xFF is not define */ |
| FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0; /* AC6 threshold in Celsius, 0xFF is not define */ |
| FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0; /* AC7 lowest threshold in Celsius, 0xFF is not define */ |
| FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0; /* critical threshold* in Celsius, 0xFF is not define */ |
| FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00; |
| |
| /* IMC Fan Policy PWM Settings */ |
| FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00; |
| FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */ |
| FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0; /* AL0 percentage */ |
| FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0; /* AL1 percentage */ |
| FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0; /* AL2 percentage */ |
| FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0x00; /* AL3 percentage */ |
| FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0x00; /* AL4 percentage */ |
| FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0x00; /* AL5 percentage */ |
| FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0x00; /* AL6 percentage */ |
| FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0x00; /* AL7 percentage */ |
| |
| FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg0 = 0x00; |
| FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg1 = 0x01; /* Zone */ |
| FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg2 = 0x55; /* BIT0 | BIT2 | BIT5 */ |
| FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg3 = 0x17; |
| FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg4 = 0x00; |
| FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg5 = 0x00; |
| FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg6 = 0x90; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ |
| FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg7 = 0; |
| FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */ |
| FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg9 = 0; |
| |
| FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg0 = 0x00; |
| FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg1 = 0x01; /* Zone */ |
| FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg2 = 60; /* AC0 threshold in Celsius */ |
| FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg3 = 40; /* AC1 threshold in Celsius */ |
| FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg4 = 0; /* AC2 threshold in Celsius */ |
| FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg5 = 0; /* AC3 threshold in Celsius, 0xFF is not define */ |
| FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg6 = 0; /* AC4 threshold in Celsius, 0xFF is not define */ |
| FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg7 = 0; /* AC5 threshold in Celsius, 0xFF is not define */ |
| FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg8 = 0; /* AC6 threshold in Celsius, 0xFF is not define */ |
| FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg9 = 0; /* AC7 lowest threshold in Celsius, 0xFF is not define */ |
| FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegA = 0; /* critical threshold* in Celsius, 0xFF is not define */ |
| FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegB = 0x00; |
| |
| FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg0 = 0x00; |
| FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg1 = 0x01; /* Zone */ |
| FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg2 = 0; /* AL0 percentage */ |
| FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg3 = 0; /* AL1 percentage */ |
| FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg4 = 0; /* AL2 percentage */ |
| FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg5 = 0x00; /* AL3 percentage */ |
| FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg6 = 0x00; /* AL4 percentage */ |
| FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg7 = 0x00; /* AL5 percentage */ |
| FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg8 = 0x00; /* AL6 percentage */ |
| FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg9 = 0x00; /* AL7 percentage */ |
| |
| FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg0 = 0x00; |
| FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg1 = 0x2; /* Zone */ |
| FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg2 = 0x0; /* BIT0 | BIT2 | BIT5 */ |
| FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg3 = 0x0; |
| FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg4 = 0x00; |
| FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg5 = 0x00; |
| FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ |
| FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg7 = 2; |
| FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg8 = 5; /* PWM steping rate in unit of PWM level percentage */ |
| FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg9 = 0; |
| |
| FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg0 = 0x00; |
| FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg1 = 0x3; /* Zone */ |
| FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg2 = 0x0; /* BIT0 | BIT2 | BIT5 */ |
| FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg3 = 0x0; |
| FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg4 = 0x00; |
| FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg5 = 0x00; |
| FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg6 = 0x0; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */ |
| FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg7 = 0; |
| FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */ |
| FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg9 = 0; |
| |
| /* IMC Function */ |
| FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x333; /*BIT0 | BIT4 |BIT8; */ |
| |
| /* NOTE: |
| * FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage, |
| * AGESA put EcDefaultMessage as global data in ROM, so we can't override it. |
| * so we remove it from AGESA code. Please See FchInitLateHwm. |
| */ |
| } else { |
| /* HWM fan control, using the alternative method */ |
| FchParams->Imc.ImcEnable = FALSE; |
| FchParams->Hwm.HwMonitorEnable = TRUE; |
| FchParams->Hwm.HwmFchtsiAutoPoll = TRUE; /* 1 enable, 0 disable TSI Auto Polling */ |
| } |
| } |
| |
| /** |
| * Fch Oem setting callback |
| * |
| * Configure platform specific Hudson device, |
| * such Azalia, SATA, IMC etc. |
| */ |
| static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINTN FchData, VOID *ConfigPtr) |
| { |
| AMD_CONFIG_PARAMS *StdHeader = (AMD_CONFIG_PARAMS *)ConfigPtr; |
| if (StdHeader->Func == AMD_INIT_RESET) { |
| FCH_RESET_DATA_BLOCK *FchParams = (FCH_RESET_DATA_BLOCK *) FchData; |
| printk(BIOS_DEBUG, "Fch OEM config in INIT RESET "); |
| FchParams->LegacyFree = CONFIG_HUDSON_LEGACY_FREE; |
| FchParams->FchReset.SataEnable = hudson_sata_enable(); |
| FchParams->FchReset.IdeEnable = hudson_ide_enable(); |
| FchParams->FchReset.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); |
| FchParams->FchReset.Xhci1Enable = FALSE; |
| } else if (StdHeader->Func == AMD_INIT_ENV) { |
| FCH_DATA_BLOCK *FchParams = (FCH_DATA_BLOCK *)FchData; |
| printk(BIOS_DEBUG, "Fch OEM config in INIT ENV "); |
| |
| /* Azalia Controller OEM Codec Table Pointer */ |
| FchParams->Azalia.AzaliaPinCfg = TRUE; |
| FchParams->Azalia.AzaliaConfig = (const AZALIA_PIN){ |
| .AzaliaSdin0 = (CONFIG_AZ_PIN >> 0) & 0x03, |
| .AzaliaSdin1 = (CONFIG_AZ_PIN >> 2) & 0x03, |
| .AzaliaSdin2 = (CONFIG_AZ_PIN >> 4) & 0x03, |
| .AzaliaSdin3 = (CONFIG_AZ_PIN >> 6) & 0x03 |
| }; |
| FchParams->Azalia.AzaliaOemCodecTablePtr = CodecTableList; |
| /* Azalia Controller Front Panel OEM Table Pointer */ |
| |
| /* Fan Control */ |
| oem_fan_control(FchParams); |
| |
| /* XHCI configuration */ |
| FchParams->Usb.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE); |
| FchParams->Usb.Xhci1Enable = FALSE; |
| |
| /* sata configuration */ |
| FchParams->Sata.SataClass = CONFIG_HUDSON_SATA_MODE; |
| switch ((SATA_CLASS)CONFIG_HUDSON_SATA_MODE) { |
| case SataRaid: |
| case SataAhci: |
| case SataAhci7804: |
| case SataLegacyIde: |
| FchParams->Sata.SataIdeMode = FALSE; |
| break; |
| case SataIde2Ahci: |
| case SataIde2Ahci7804: |
| default: /* SataNativeIde */ |
| FchParams->Sata.SataIdeMode = TRUE; |
| break; |
| } |
| } |
| printk(BIOS_DEBUG, "Done\n"); |
| |
| return AGESA_SUCCESS; |
| } |