| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2010 Advanced Micro Devices, Inc. |
| * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #ifndef SB700_H |
| #define SB700_H |
| |
| #include <device/pci_ids.h> |
| #include "chip.h" |
| |
| /* Power management index/data registers */ |
| #define BIOSRAM_INDEX 0xcd4 |
| #define BIOSRAM_DATA 0xcd5 |
| #define PM_INDEX 0xcd6 |
| #define PM_DATA 0xcd7 |
| #define PM2_INDEX 0xcd0 |
| #define PM2_DATA 0xcd1 |
| |
| #define SB700_ACPI_IO_BASE 0x800 |
| |
| #define ACPI_PM_EVT_BLK (SB700_ACPI_IO_BASE + 0x00) /* 4 bytes */ |
| #define ACPI_PM1_CNT_BLK (SB700_ACPI_IO_BASE + 0x04) /* 2 bytes */ |
| #define ACPI_PMA_CNT_BLK (SB700_ACPI_IO_BASE + 0x16) /* 1 byte */ |
| #define ACPI_PM_TMR_BLK (SB700_ACPI_IO_BASE + 0x20) /* 4 bytes */ |
| #define ACPI_GPE0_BLK (SB700_ACPI_IO_BASE + 0x18) /* 8 bytes */ |
| #define ACPI_CPU_CONTROL (SB700_ACPI_IO_BASE + 0x08) /* 6 bytes */ |
| #define ACPI_CPU_P_LVL2 (ACPI_CPU_CONTROL + 0x4) /* 1 byte */ |
| |
| extern void pm_iowrite(u8 reg, u8 value); |
| extern u8 pm_ioread(u8 reg); |
| extern void pm2_iowrite(u8 reg, u8 value); |
| extern u8 pm2_ioread(u8 reg); |
| #ifndef __SIMPLE_DEVICE__ |
| extern void set_sm_enable_bits(struct device *sm_dev, u32 reg_pos, u32 mask, |
| u32 val); |
| #endif |
| |
| #define REV_SB700_A11 0x11 |
| #define REV_SB700_A12 0x12 |
| #define REV_SB700_A14 0x14 |
| #define REV_SB700_A15 0x15 |
| |
| /* This shouldn't be called before set_sb700_revision() is called. |
| * Once set_sb700_revision() is called, we use get_sb700_revision(), |
| * the simpler one, to get the sb700 revision ID. |
| * The id is 0x39 if A11, 0x3A if A12, 0x3C if A14, 0x3D if A15. |
| * The differentiate is 0x28, isn't it? */ |
| #define get_sb700_revision(sm_dev) (pci_read_config8((sm_dev), 0x08) - 0x28) |
| |
| #ifndef __SIMPLE_DEVICE__ |
| void sb7xx_51xx_enable(struct device *dev); |
| #endif |
| |
| #ifdef __PRE_RAM__ |
| void sb7xx_51xx_lpc_port80(void); |
| void sb7xx_51xx_pci_port80(void); |
| void sb7xx_51xx_lpc_init(void); |
| void sb7xx_51xx_enable_wideio(u8 wio_index, u16 base); |
| void sb7xx_51xx_disable_wideio(u8 wio_index); |
| void sb7xx_51xx_early_setup(void); |
| void sb7xx_51xx_before_pci_init(void); |
| uint16_t sb7xx_51xx_decode_last_reset(void); |
| #else |
| #include <device/pci.h> |
| /* allow override in mainboard.c */ |
| void sb7xx_51xx_setup_sata_phys(struct device *dev); |
| void sb7xx_51xx_setup_sata_port_indication(void *sata_bar5); |
| |
| #endif |
| |
| void set_lpc_sticky_ctl(bool enable); |
| |
| int s3_save_nvram_early(u32 dword, int size, int nvram_pos); |
| int s3_load_nvram_early(int size, u32 *old_dword, int nvram_pos); |
| |
| void enable_fid_change_on_sb(u32 sbbusn, u32 sbdn); |
| #endif /* SB700_H */ |